EDAM-8015 6-ch ISO RTD Input module * Support PT100, PT1000, Balco 500, NI604, NI1000 RTD types * Protocol MODBUS RTU, ASCII Command * Support isolated input channels * Fully photo-isolation 3750Vrms * Wide supply voltages (10_30V) * Built-in TVS/ESD protection * Burn-out auto detection
EDAM-8018A 8 Isolated Analog/Thermocouple Temperature Input Module * Support Thermocouple J.K.T.R.S.E.B.N.C Type * Protocol MODBUS RTU, ASCII Command * Support Isolated input channels * Fully photo-isolation 3750Vrms * Wide supply voltages (10-30V) * Built-in TVS / ESD protection * Burn-out auto detection
4 analog output and 4 digital input channels module * 4 isolation analog output channel . * 14 bits Analog Resolution * Programmable voltage/current range with slew rate. * 4 channels isolation digital input * 3000 Vrms isolation voltage for A/O channel * Programmable power-on value and safe value * Programmable host watchdog timer for host failure protection. * Support ASCII format and Modbus-RTU protocol
13 Channels Isolated Digital Output Module * 13 Isolated Single-Ended output channels * Open Collector Output (NPN) * Programmable Host Watchdog Timer For Host Failure Protection. * Support MODBUS RTU And ASCII Format
8 Non-Isolated digital input and 8 Non-Isolated digital output (NPN) * Support 8 non-Isolated digital output *Open Collector Output (NPN) *Support 8 non-isoloated digital input channels *Input channel support max.50Hz counter * Programmable Host Watchdog Timer for Host Failure Protection *Support Modbus RTU and ASCII Format Protocol
8 Isolation with differential AC Input (max. 250VAC), with LED * Support 8 isolated differential AC digital input * EMS Protection (IEC-61000-4-2 (EDS)Level 4) * Programable Host Watchdog Timer For Host Failure Protection. * Support MODBUS And ASCII Format Protocol
EDAM-9061A 6-channel Digital Input and 6 RELAY (0.6A/AC, 2A/DC) Output module * Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP * Ethernet 10/100 Based-T Communication * Support 6 relay channels. (Form A) * Provide Auto-Off Time of digital output * Support Automatic DIO Synchronization func. * Support 6 Isolated digital Input Channels * Provide Counter Inputs Mode * Support Dry/Wet Contact Inputs * Provide PoE function(only for EDAM-9461) * Fully Photo-Isolation 3750Vrms
EDAM-8000 series: RS-485 Digital and Analog I/O Remote Control Modules Overview: EDAM-8000 is a series of data acquisition modules. It provides a total solution of the data acquisition network and control system. Including the communication modules, the analog input modules, the analog output modules, and the digital I/O modules. You can remotely control up to 256 EDAM modules on RS-485 network.
High Brightness Display (Sunlight Readable Screen) Inch : 5.7 ~ 27 Resolution : 320x240 ~ 1920x1080 Brightness : 570~1,000 nits Panel Interface : TTL / LVDS / eDP High brightness displays differ from the brightness of traditional panels. It allows the user to see the display under strong sunlight or under direct light source which enables operation under special conditions in industries such as military operation, transportation industries, outdoor digital signage, and medical sectors. We possess years of experiences in high brightness display technology which enable us to deliver customization services to high brightness display customers. Our customization service : 5.7 ~ 31.5 inch panel size for selection. Customized LED Lightbar. Extent LED Lightbar life time. Improve brightness for thin panels design services. Optimization heat dissipation solution. Our backlight design services includes light guide films, plastic housing, metallic housing., and etc. We provide customization services for touch panel integration and optical bonding.
AD Board (LCD Controller Board) Support Resolution : up to 4096x2160 (4K2K) Suitable Panel Interface : LVDS / eDP / V-By-One Signal Input : VGA / DVI / HDMI / DP Offer in-box packaging services for cables including OSD Key Cable, Panel Cable, and Backlight Cable. LCD Controller Board is the display driver unit for a monitor that converts real world analog visual signals into digital form which is an essential component that gives the monitor its fundamental displaying capability. Our LCD Controller Board is designed with wide range of application in mind. It provides state of the art display functionality that can be used as a standalone display driver module to support combination of customers specified input (i.e. HDMI, VGA, DVI, and Display Ports...) and output (i.e. EDP, LVDS, V-By-One) to meet developers specific requirement whether it be industrial display, measuring equipment, POS machine, LCD monitor, Digital Signage, and Kiosk. On-board Realtek solution offers top notch reliability, precision, and robustness. Up to 4096x2160 60Hz resolution We provide detailed technical parameters for best performance. Design and manufacture types of controllers to best provide wide project requirements. Efficiently manage safety stocks for customers to deliver streamline inventory turnover.
Features: 1. Completely submersible liquid level transmitter 2. Wide variety of sensors, e.g. extension tube or flexible cable, standard or high temperature 3. Measuring range up to 328ft (100m) 4. 4-20mA output, 2-wire loop powered 5. Pressure transducer also available
Features: 1. Supply Voltage: Loop Power 18~32 Vdc 2. DCV Input: 0~500 mV/ 0~1V/ 0~5V/ 0~10V/ 0~20V 3. DCA Input: 0~20 mA/ 4~20 mA 4. Thermocouple Input: K / J / T / E / R / S / B / N 5. RTD/ Resistance Input: PT100/0~400W 6. Analog Output: 4~20 mA (Loop Power) 7. Ambient temperature: -20~60°C 8. Communication: HART 9. Galvanic Isolation: 1500V
Features: 1. Power Source: DC 9~30V 2. Signal Input Interface: a. RS-485*4 b. 4-20mA*4 c. 1 Wire* 4 d. I/O* 4 3. RF Interface: 3.5mm SMA Female connector (ANT) 4. RF Band: 2.4G ISM Band or Quad band: GSM
Features: 1. BVP/BAH piston industrial vibrators and air hammers provide continuous low frequency or single impact vibrator energy 2. BVK/BVR/BVT ball, ring and turbine industrial vibrators are compact, lightweight and quiet compared to other types 3. Frequency and amplitude are adjustable 4. Industrial vibrator controllers and accessories are available
Features: 1. 1 current input port to connect with continuous current or current output products. Applicable for use in hazardous zone 2. 3 output ports - relay output, current output, and RS-485 3. LED indicator, user friendly 4. DIP switch for function selection 5. In house programming per customers' criteria 6. Self-test function for system function monitoring 7. Setting relay output as alarm for optional external sensing unit connection 8. Optional RS-485 interface enables easy system configuration & supply current data retrieve 9. Product design complies with explosion proof standard
Arcing is eliminated. Connect the red battery clamp to the positive battery terminal. Connect the black Clamp to the negative or ground to a rigid metallic surface on the engine. The connection should be 12 to 19 inches from the battery. 4.Hose: Since the pump has a lower discharge pressure it is ., recommended that anoncolapsiable hose be used for maximum pumping capacity. 5.Hoisting & lowering: Use the attached nylon line. Do not use the power cord ., for handling the unit. 6.Operation of unit: Lower the unit into the liquid to be pumped(note: this unit is not to used to pump Flamable liquids).Then turn on the switch. Pump can be run for a few minutes(less than 5) without liquid. Do not run completely dry for any extended period(less than 5 min.).This will prevent. 7.Running time peroids: The unit draws 20-25 amperes and can be operated for approximately 1 hr. On a fully charged 60 amp-hour battery and still be able to start the vehicle under normal conditions. Caution should be used when running times exceeds 25 !v 30 minutes without the engine running to recharge the battery. Also be mindful of cold temperatures which lowers battery
Spe3 series 1/3 hp effluent pumps 1.1/2" solids handling 2.Heavy duty lip & mechanical seals in tandem 3.115 & 230 volts available 4.60hz 5.Durable cast iron motor housing 6.115 & 230 volt piggyback power plug and switch Plug w/20' cord as standard
Dsgp1-2021-60hz Dsgp1-2023-60hz 2 hp grinder pump 1.Double mechanical seal 2.Silicon carbide (main) !v grit 3.Resistant 4.Carbon ceramic (secondary) 5.Dual sealing chambers with 6.Moisture detection for optimum 7.Motor protection ductile iron 8.Impeller, recessed, clog-free 9.30 year proven design 10.Stainless steel grinder assembly 11.Effectively macerates domestic 12.Into a fine slurry
Dshhgp1-2021-60hz 2 hp grinder pump 1.Ideal for long discharge runs or high static heads 2.2 piece motor housing 3.Separate cord cap assembly 4.Internal capacitors - no control box req'd ductile iron impeller, recessed, clog-free dual silicon carbide seal - grit resistant stainless steel grinder assembly effectively macerates domestic sewage into a fine slurry 5.30 year proven design
Digp-7023/7043-60hz (patented) 1.Available with 2.7.5 hp grinder pump 3.High head, double stage 4.Doubled output pressure 5.Unmatched performance 6.350 shut-off head 7.Flows to 100 gpm 8.Balanced design 9.Ideal for long discharge runs or high static 10.Heads 11.Potentially replaces higher hp pumps 12.Ductile iron impeller, recessed, clog-free 13.Silicon carbide seals !v grit resistant
