Relay
1. Current tripping setting i!£g & display 2. Tripping time setting t!£g & display 3. Prealarm set-point setting al. & display 4. Function button 5. Setting & function selective button 6. Function setting button 7. Auxiliary supply presence 8. Prealarm display 9. Tripping display 10. Tripping test display 11. Reseting display 12. Tripping range:0.025~250a. 13. Tripping time: 0.02~500 second.
EDAM-8067D 8-ch relay(0.5A/120Vac, 1.0A/24Vdc) Output module with LED display * 8-Channels relay Output * Normal Open Relay Output(Form A) * Relay contact rating 5A/120Vac,1A/24Vdc. * Programmable Host Watchdog Timer For Host Failure Protection. * Support MODBUS RTU And ASCII Format
EDAM-8066D 8-ch Photo-MOS relay Output module with LED display * 8-Channels Isolated Output * Normal Open PhotoMOS Relay Output * Typical applications: â?§ High-speed inspection machines â?§ Telephone equipment â?§ Data communication equipment * Programmable Host Watchdog Timer For Host Failure Protection. * Support MODBUS RTU And ASCII Format Protocol.
8 Isolated digital input and 3 relay output * Support 8 isolated digital input channels * Input channel support max. 50Hz counter * Support 3 relay output channels (Form A) * Programmable Host Watchdog Timer For Host Failure Protection. * Support MODBUS And ASCII Format Protocol
EDAM-9060A 5-channel Digital Input and 3 RELAY Output module * Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP * Ethernet 10/100 Based-T Communication * Support 3 relay ch. (RL1/Form A,RL2/3 Form C) * Provide Pulsed/delay Output Mode * Support 5 Isolated digital Input Channels * Provide Counter/ Frequency Inputs Mode * Support Dry/ Wet Contact Inputs * Fully Photo-Isolation 3750Vrms * Status LED indicator
Relays.
Carbon fiber roller, carbon fiber composite roller, earth leakage relay, earth leakage monitoring relay.
This antenna system consists of two functional blocks, the LNA portion and the patch antenna. CONFIGURATION RF Cable - RF Coaxial Cable, 2.7± 0.2mm - Cable Length : 5M ± 5cm - RF Connector : SMA 180(M) / MCX 90 (M) GENERAL ENVIRONMENTAL CONDITIONS - Operation Temperature : -40 to + 85 - Storage Temperature : -40 to + 85 - Relative Humidity : 40% to 95% ELECTRICAL SPECIFICATIONS - Input Voltage : Min:2.5V Typ:3.0V Max:5.5V - Power Consumption : Typ: 10mA. Max: 15mA. @3.0V ANTENNA - Antenna Dimensions : 25 x 25 x 4 mm - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - GAIN : 1575.42MHZ : -3dBi Typ. @zenith 1602MHZ : -5dBi Typ. @zenith - Polaration : RHCP LNA and FILTER - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - Gain (without Cable) : 1575.42MHz:28 dB Min.30 dB Typ.( + 25 ± 5) 1602MHz:28 dB Min.30 dB Typ.( + 25 ± 5) - Noise Figure : 2.0 dB Typ. ( + 25 ± 5 ) / 2.6 dB Max. ( + 85 ) - Out Band Rejection : 1587.5 ±140MHz 15dB Min - Output Impedance : 50 - Output VSWR : 2.0 Max TOTAL SPECIFICATIONS (Through Antenna, LNA, Cable and Connector) - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - Gain : 1575.42MHZ: 27± 3dBi @zenith 1602MHZ: 29.5± 3dBi @zenith - Output Impedance : 50 - Output VSWR : 2.0 Max
This antenna system consists of two functional blocks, the LNA portion and the patch antenna. CONFIGURATION RF Cable - RF Coaxial Cable, 2.7± 0.2mm - Cable Length : 5M ± 5cm - RF Connector : SMA 180(M) / MCX 90 (M) GENERAL ENVIRONMENTAL CONDITIONS - Operation Temperature : -40to + 85 - Storage Temperature : -40 to + 80 - Relative Humidity : 40% to 95% ELECTRICAL SPECIFICATIONS - Input Voltage : Min:2.5V Typ:3.0V Max:5.5V - Power Consumption : Typ: 10mA. Max: 15mA. @3.0V ANTENNA - Antenna Dimensions : 25 x 25 x 4 mm - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - GAIN : 1575.42MHZ : -3dBi Typ. @zenith 1602MHZ : -5dBi Typ. @zenith - Polaration : RHCP LNA and FILTER - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - Gain (without Cable) : 1575.42MHz:28 dB Min.30 dB Typ.( + 25 ± 5) 1602MHz:28 dB Min.30 dB Typ.( + 25± 5) - Noise Figure : 2.0 dB Typ. ( + 25 ± 5) / 2.6 dB Max. ( + 85 ) - Out Band Rejection : 1587.5 ±140MHz 15dB Min - Output Impedance : 50 - Output VSWR : 2.0 Max TOTAL SPECIFICATIONS (Through Antenna, LNA, Cable and Connector) - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - Gain : 1575.42MHZ: 27± 3dBi @zenith 1602MHZ: 29.± 3dBi @zenith - Output Impedance : 50 - Output VSWR : 2.0 Max
This antenna system consists of two functional blocks, the LNA portion and the patch antenna. CONFIGURATION RF Cable - RF Coaxial Cable, 2.7± 0.2mm - Cable Length : 5M ± 5cm - RF Connector : SMA 180(M) / MCX 90 (M) GENERAL ENVIRONMENTAL CONDITIONS - Operation Temperature : -40 to + 85 - Storage Temperature : -40 to + 85 - Relative Humidity : 40% to 95% ELECTRICAL SPECIFICATIONS - Input Voltage : Min:2.5V Typ:3.0V Max:5.5V - Power Consumption : Typ: 10mA. Max: 15mA. @3.0V ANTENNA - Antenna Dimensions : 25 x 25 x 4 mm - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - GAIN : 1575.42MHZ : -3dBi Typ. @zenith 1602MHZ : -5dBi Typ. @zenith - Polaration : RHCP LNA and FILTER - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - Gain (without Cable) : 1575.42MHz:28 dB Min.30 dB Typ.( + 25 ± 5) 1602MHz:28 dB Min.30 dB Typ.( + 25 ± 5) - Noise Figure : 2.0 dB Typ. ( + 25 ± 5) / 2.6 dB Max. ( + 85 ) - Out Band Rejection : 1587.5 ±140MHz 15dB Min - Output Impedance : 50 - Output VSWR : 2.0 Max TOTAL SPECIFICATIONS (Through Antenna, LNA, Cable and Connector) - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - Gain : 1575.42MHZ: 27± 3dBi @zenith 1602MHZ: 29.5± 3dBi @zenith - Output Impedance : 50 - Output VSWR : 2.0 Max
Main Technical Specification - Frequency Range (MHz) : 434 - Bandwidth (MHz) : ±3 - VSWR : 2.0 - Gain(dBi) : 1.80 - Max Input power (W) : 50 - Input Impedance () : 50 - Polarization Type : Vertical - Antenna Length(mm) : 88mm(90) / 108mm (180) - Connector Type : SMA
1 Description:WSS007 Dual Band Antenna with RP-SMA(M) 2 Model No.:WSS007 3 Antenna Profile:197 mm 4 Color:Black 5 Electrical Characteristic Operating Frequency:2.4~2.5GHz/ 5GHz/ Dual Band Antenna Type:Dipole Polarization Type:Linear Type of Radiation:Toroidal Peak Gain:2.0 dBi Typical Impedance:50 Ohm nominal VWSR:2.0:1 Max 6 Mechanical Characteristics Action:Swivel Type Lead Length:Customization Connector:RP-SMA(M) Core:N/A 7 Raw Material Coaxial Cable:RG-178 Housing:TPU Hinge:PC+ALLOY PE bag or Customization
1 Description WSS002 Dual Band Antenna with RP-SMA(M) 2 Model No.:WSS002 3 Antenna Profile:108.5 mm 4 Color:Black 5 Electrical Characteristic Operating Frequency:2.4~2.5GHz/ 5GHz/ Dual Band Antenna Type:Dipole Polarization Type:Linear Type of Radiation:Toroidal Peak Gain:2.0 dBi Typical Impedance:50 Ohm nominal VWSR:2.0:1 Max 6 Mechanical Characteristics Action:Swivel Type Lead Length:RP-SMA(M) Core:N/A 7 Raw Material Coaxial Cable:RG-178 Housing:TPU Hinge:PC+ALLOY PE bag or customization
Vcxo: 3225, 5032, 7050, half, full Tcxo & vctcxo: Smd:11.4*9.6, 7050, 5032, 3225 Through-hole:1812, 2013, 1313 Ocxo: 5151, 3939, 3627, 2525, 2020, 2013 Rtc module: Sop-14
Specifications Operating environment (Receiver Unit) • Operating temperature range -20 deg to 80 deg C • Storage temperature range -20 deg to 85 deg C • Operating humidity 100% • Vibration 3.5mm 10 Hz in X,Y and Z direction. Power (Receiver Unit) • Power Required 12V DC (MiniDC jack) or Battery DC 3V • Battery Life: Approx. 6 Months • Battery type AAA 1.5V (x2). Dimensions Monitor (Receiver Unit) • Weight 60 g • Size L 63mm * W 42.5mm* D 20mm • LCD View size L 33.5mm * W 28.2mm. System (Receiver Unit) • System frequency at 433 MHz • Sensor pressure range 0-60 psi • Sensor pressure sensitivity ± 1.5 psi • Sensor temperature sensitivity ±2 deg C • Low power consumption in sensor • Transmission length: up to 10M (Can vary between vehicle's). Emissions (Receiver Unit / Sensors) • FCC Comply with part 15,Class B • CE • C Tick. Operating environment (Sensors) • Operating temperature range -40 deg to 125 deg C • Operating humidity 100% • Shock >1000G from 1.5m height • Vibration 10mm 5-200 Hz in X,Y and Z direction Power (Sensors) • Sensor is equipped with battery - CR1632 (3V) • Battery Life - Approx. 1 Year. Dimensions Sensor (Sensors) • Weight - 10g±1 g • Size - Diameter 18.5mm / Height 20mm.
Connector: A type, mini and micro type Cable: micro coaxial cable AWG40 Version: 1.4 version Length: 0.8m to 2.5m Support: 4K ,3D and high speed
Antenna Size¡G 90.8mm(Dia) ¡Ñ 109mm(H)This series of Iridium antennas is specifically designed to provide excellent coverage in the 1610 to 1630 MHz range.
1. Detachable battery pack 2. Dual independent battery gauge 3. LCD display 4. Internal charger 5. Backup controls on the control box 6. Compatible with Bestcare Performance or Legacy actuators
The fall down detection alarm system designed to use in the industrial and commercial areas, to ensure safety for employees working in high-risk facility, working alone, security guard, elder or disabled. The Worker Emergency Alarm System is a combination of personal alarm and fall down detector. When wireless Man-Down Transmitter detects the horizontal position, it is trigger alarm signal. The Wireless Fall Down Alarm Detector will beep for 30 seconds to warn the wearer to avoid false alarms before sending the warning signal to control center and to other wearers in the group. The wearable alarm detector has tilt detection, no motions detection. The Lone Worker Alarm can also be activated manually by pressing an SOS button. The Fall Down Detection Alarm System includes wireless fall down detector, Base Receiver with LED Display and alarm signal repeater. The Wireless Alarm Signal Repeater can extend the alarm signal about 800 meters. (true-line-of-site range). The repeater helps to build lone worker security system for the indoor and outdoor application. One Base Receiver can work with 15 pcs personal alarm detector.
