Description CS-264 is the latest innovative Contact adhesive using our home-grown technology. This is the only Contact adhesives with 50% solid. It's cost effective with the highest active ingredients. Less solvent less health hazard. CS-264 is made of tough elastomeric rubber, tackifying resins and solvent with least odour without toluene. Features Faster sticking Contact Adhesive within 5 minute. Strong grab on contact with higher green strength. Paintable when dried. Easy to extrude even at -15 C , most suitable for all season. Very Low odour without toluene.
DESCRIPTION CC-301(54) is 1 K aromatic moisture curing PU adhesives, it can be used as a waterproof primer for cement. CC-301(54) has excellent bonding strength, weather resistance, hydrolysis resistance after fully curing. (about 3 days. ) TECHNICAL DATA Appearance : light yellow transparent liquid Component PU : pre-polymer Viscosity : 700-900 cps Solid Content : 100% Shelf Time : 6 months OPERATION 1. Put CC 301(54) onto the cement, then used a roller to coat on the cement. 2. After first coating has already tack free (about 1 hour), the second coating can be applied immediately. 3. After fully curing ( a bout 8 24 hours), the top coating can be applied.
Description CS-613FD is a water-based multi-purposed epoxy putty and adhesive. It is developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. It is easy to mix even by hand due to our innovative water-based technology. Features Paintable easily with wb coating Easy to use Smooth to tool with trowel Non-sagging Stronger adhesion High solid by volume; 100% water resistant when cured. Low odor VOC free / Solvent free Uses Gypsum boardCalcium silicate board Fiber cement board Plywood / Timber Concrete / Tile It may be suitable to use on other substrates not mentioned above. Application 1. The surface to be adhered must be free of dust, release agent, oil and grease 2. Mix part A and part B with 1: 1 (by volume), and stir until homogeneous as indicated by uniform color. 3. Do not stir or mix the two parts on the application surface.
Description CS-261 is a acrylic sensitive adhesives. It has good initial tack, suitable for the adhesion of PVC tile. It is easy to use. Application CS-261 can be used in decoration, PP to paper,PVC to non-woven fabrics industry.
PE-265 is and acrylic pressure-sensitive adhesives. It has high initial tack, and suitable to apply on PVC flooring tiles. 1. Wide-range decorative applications. 2. Domestic constructions. 3. Compatible with PP, PE, PVC to non-woven fabrics or foam products.
1.High solid content 50% 2.Has high transparency,low fluidity and slump 3.Can be extruded easily in winter(about-15°C) 4.Can stick Metal, Timber, Concrete and other building material 5.VOC free versions are also available, using VOC exempted solvent.
APPLICATIONS & CHARACTERISTICS 1. High bonding strength and easy to brush. 2. It can be applied for many materials, such as wood, PU leather, sponge and cloth etc. 3. Water based, green product. PHYSICAL PROPERTIES : 1. AppearanceBeige liquid 2. Main ComponentWater-based neoprene. 3. Solid Content 52± 2% 4. Viscosity 4500 5500 cps (25, LVT) 5. Shelf Life 6 months
Product Description : keep your knife sharp as new as it should be, it's removable with tremendous suction funtioning that you can attach it wherever you want. Price of product ( USD price or FOB price) : 300pcs 2.64USD.1000pcs . 2.54USD. 3000pcs 2.39USD Product origin : Longjing,Taichung city,Taiwan Key Specifications/Special Features : Green,red Finished Sucution Rubber
Model No. BS36 push open type Made in Taiwan #Spec Disconnect:Lever (Non-handed design) Finish:Electro-zinc plated with cclear, yellow or black chromate Height:36mm Length:10"~24" Load Rating:30 kgs at 18" (450mm) Material:Steel Mounting Typed:Side mounted Side clearance:12.7mm +0.8/0 #Key Features Push-open Ball Bearing Drawer Slide Touch release - push drawer front to open or close #Main Export Market ASIA ,AUSTRALASIA ,C-AMERICA ,EUROPE ,MID-EAST ,N-AMERICA ,S-AMERICA
Our new creative School Glue/DIY product- ReposGlu 60g (Repositionable Glue) is a kind of DIY product which could provide permanent bond or temporary bond. It also could be Removable, Repositionable, Re-applicable and it will not damage any decoration. Application: it could be used at office, school, home decoration and any other places where you need. Specification: Non-toxic, Acid Frees, Safe for children, Eco- friendly, RoHS compliant New Weight: 60g/tube Design : Built-in Brush https://www.youtube.com/watch?v=T7EA7WSytoQ (How to use DIY ReposGlu) Welcome to contact us!
Neodymium magnets, anchor chain, gift ware, PVA sponge.Shipping
Abrasive blast aggregate.
Hydraulic, pneumatic automatic series, hydraulic & pneumatic cylinder, hydraulic cylinder components.
Fasteners, screw, nut.
Drywall tools, plastering tools, concrete tools, masonry tools, oriental masonry, carpenter tools, flooring & ceiling, fasteners & personal proteccion.
Piston components, timing parts, brakes and chassis parts, engine components and engine valve, headlight and tail lamp, bonnet and fender etc.
Color: Transparent Material: pu glue/pu binder Packing: 200kg/drum or 25kg/drum Certificate: MSDS/REACH Resistance: UV stable, resist hard weather Delivery time: 3-5 Working Days Shape: Liquid Capability: Resistance of aging
Type: Suzuki Seal repair kit Suzuki Samurai front axle without bearings and semering.All Suzuki Samurai , Santana,SJ410, SJ413 models.
Type: TOYOTA LITE/TOWNACE TRUCK(1986-1999) LAND CRUISER S/T,H/T(1990-2004)
Type: TOYOTA LAND CRUISER VAN(1990-1998)
