2 HDMI outputs display HD video simultaneously on 2 Displays! Version 1.3 Digital Toslink Audio output for surround sound integration Audio interface supporting PCM, Dolby Digital, DTS digital audio at up to 192kHz frame rate Dedicated hardware HDCP engine for robust and secure HDCP operation Works with HDMI or DVI-D, HDCP-enabled HDTV Supports high resolution video 480p, 720i/p, 1080i/p Clear EYETM design optimizes HDMI signal transmission Backward compatible with DVI-D
Diameter: 12 CM DVDR Recording Speed: 8X Recording Capacity: 4.7GB Recording Length: 120MINS 50/100pcs per cake; 600pcs/ carton
Silver/ Silver or Silver/ Light Blue Diameter: 12 CM CD-R Recording Speed: 52X Recording Capacity: 700MB Recording Length: 80MINS 50pcs/spindle; 600pcs/ carton
2.4G Wireless audio transmission USB2.0 Port. DATA rates 6Mbit/sec System Requirements Microsoft XP, Vista and Mac operating system Transmission distance 10 meters Audio Bandwidth 20Hz to 20kHz Audio Distortion 0.3 % í+ 0.5 % Transmitting Power í+ -3dBm Receiver Sensitivity -95 dBm @ 12 dB SINAD Power Supply 3 X 1.5 V AAA battery or 3 x 1.2 V AAA rechargeable battery Power Consumption 300 mA Standard Exporting Packing
Made in Taiwan with total quantity up to 3680000 pcs, pictures and detail listing provided upon request, may buy the as a whole or seperate. all prices negotiable.
Cables
Cables
Cables
Cables
Embedded tiny high power poe pse module Befact technologies launches embedded quad port pse module, pse-hqd(high power) in september, 2008. Pse-hqd is standard and ieee802.3af compliant embedded power sourcing equipment module. Also, pse-hqd supports high power mode. Befact puts high emphasis on safety issue, so we provide double protection mechanism to protect your design. Pse modules not only equip per port over current protection (pse-hqd, 650ma/per port) but also have total power limit protection (pse-hqd maximum total power protection, 160w). Besides, pse-qd and pse-hqd still provide under/over voltage protection, so befact would like to recommend you this more safer and higher quality poe+ total solution to make you feel convenient when you design. Below are the key features of pse-hqd Ieee802.3af compliant. Per port maximum output pse-hqd, 650ma. Pse-hqd supports high power mode and backward compatible to normal power mode. Maximum total power protection. Support pd power classification from class 0 to class 4. Per port over/under voltage protection. Per port short circuit protection. Per port over current protection. Thermal cut off. Equip common mode choke (per port) to reduce emi. Enhance current surge protection. Per port pse status indication. 1.Tiny size 92mm(l)x 25.1mm(w)x24mm(h)
Embedded normal power poe pd module Befact technologies launches embedded quad port pse module, pse-qd in september, 2008. Pse-qd is standard and ieee802.3af compliant embedded power sourcing equipment module. Befact puts high emphasis on safety issue, so we provide double protection mechanism to protect your design. Pse modules not only equip per port over current protection (pse-qd, 450ma/per port) but also have total power limit protection (pse-qd maximum total power protection, 109w). Besides, pse-qd still provide under/over voltage protection, so befact would like to recommend you this more safer and higher quality poe total solution to make you feel convenient when you design. Below are the key features of pse-qd 1.Ieee802.3af compliant. 2.Per port maximum output pse-qd, 450ma 3.Maximum total power protection. 4.Support pd power classification from class 0 to class 4. 5.Per port over/under voltage protection. 6.Per port short circuit protection. 7.Per port over current protection. 8.Thermal cut off. 9.Equip common mode choke (per port) to reduce emi. 10.Enhance current surge protection. 11.Per port pse status indication. Pse-qd can support double power mode operation (pse-qd, 40w/per rj45 port) for high power consumption remote device, and so do thpd& tpd module. For example, when pse-qd & tpd-12 are applied in the same poe link simultaneously and they are operated in dual power mode, tpd-12 can offer up to 24w to remote device. So befact poe solution is also suitable for high power consumption product to utilize. If you are interested in befact technologies poe total solution, welcome to visit befcat technologies website detail information. 1.Tiny size 92mm(l)x22.1mm(w)x24mm(h)
CD-R A or b grade discs, licensed or non-licensed, branded or unbranded depends on requirements
P4 Notebook Miga provides various kinds of low cost notebooks, including famous brands, miga brand
12w output embedded poe pd module(tpd-50) Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system. The main features of tpd-50 are as following A.Isolated pd module, isolation level 1.5kv B.Ieee802.3af compliant. C.Support wide input voltage range, 39vdc to 55vdc. D.High dc/dc converting efficiency, 86%. The output power is 12w(tpd-50) E.Tiny size 60mm(l) x 19.7mm(w)x16mm(h). F.Thermal cut off & short circuit protection. G.The operating temperature is from -15oc to 55oc, @full load. The output power of tpd module depends on its loading, too. High dc/dc converting efficiency lowers the heat accumulation and temperature of tpd-50 modules. 1.Tiny size 60mm(l) x 19.7mm(w)x16mm(h).
16W Output Embedded PoE PD module(THPD-33) Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system. Below are the main features of thpd-33 modules A.Isolated pd module, isolation level 1.5kv B.Backward compatible ieee802.3af C.Support wide input voltage range, 36vdc to 55vdc. D.High dc/dc converting efficiency, 74%. The output power can reach 16w(thpd-33) E.Tiny size 75mm(l) x 22mm(w)x15.5mm(h) F.Thermal cut off & short circuit protection. G.The operating temperature is from -15oc to 55oc, @full load. The output power of thpd module depends on its loading. Also, the tiny size of thpd module increases pcb utilizing space. High dc/dc converting efficiency lowers the heat accumulation and temperature of thpd-33 modules. 1.Tiny size 75mm(l) x 22mm(w)x15.5mm(h)
12W Output Embedded PoE PD Module(TPD-12) Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system. The main features of tpd-12 are as following A.Isolated pd module, isolation level 1.5kv B.Ieee802.3af compliant. C.Support wide input voltage range, 39vdc to 55vdc. D.High dc/dc converting efficiency, 89%. The output power is 12w(tpd-12) E.Tiny size 60mm(l) x 19.7mm(w)x16mm(h)) F.Thermal cut off & short circuit protection. G.The operating temperature is from -15oc to 55oc, @full load. The output power of tpd module depends on its loading, too. High dc/dc converting efficiency lowers the heat accumulation and temperature of tpd-12 modules. 1.Tiny size 60mm(l) x 19.7mm(w)x16mm(h))
2.4g rf optical mouse Wireless: rf 2.4ghz 1) 2.4ghz wireless mouse 2) high resolution: 800~1000 dpi 3) button life: 3 million cycles 4) freely 360-degree use, max control distance: 10m 5) radio frequency: 2.4ghz 6) designed for usb applications 7) mouse battery: 3.7v/100ma polymer lithium-ion battery 8) telescopic wire:80cm/100cm/120cm selectable (charge and play) 9) use attention: when the built-in battery not work, this product can use 2 aaa alkaline batteries make it work, but when you useing 2 aaa alkaline batteries, please don't charge, because that will set the battery off
Mpo fan-out patch cord (4f, 8f, 12f-24 fibers)
Sc simplex adapter (flange or none-flange). Plastic and metal housing.
Mode type : single-mode (pc or apc) Multi-mode Sc adapter (flange or none-flange) Housing: plastic or metal Types: simplex or duplex
