Hot-Dip Galvanized Wire: Related Standarts :ISO EN 10257-1 & 2, ISO EN 10244-2, ASTM A461 Raw Material : Low, Middle and High Carbon (max. 0,90%C) Diameter Range : 0,80mm - 10,00mm Coating Thickness :30gr/m2-380gr/m2 Wire Grades : GR34-GR65-GR85-GR105-GR125-GR145-GR165 Usage : Industirial Purposes Enviromental Security Systems Agriculture Forestry and Animal Husbandry Automotive Packing : According to customers request either in rosette coils or cheeswound(treverse) coils or wooden steel reels or on carriers
Hot-Dip Galvanized Wire: Usage : *Industirial Purposes *Enviromental Security Systems *Agriculture *Forestry and Animal Husbandry *Automotive
STRAÄ°GHTENED AND CUT WIRE: Related Standards :ISO EN 10257-1 & 2, ISO EN 10244-2, ASTM A461 Raw Material :galvanized wire - annealed wire - Cold drawn wire Diameter Range :2,50mm - 6,00mm Coating Thickness :30gr/m2-380gr/m2 Wire Grades :180-4.000mm Usage : Industirial Purposes Construction Enviromental Security Systems Packing : in bundles of about 50kg - 1000kg or according to customer request.
Related Standards :EN 10244-1&2, ASTM B232, ASTM A475, ASTM B500, BS 215, IEC 1089 Raw Material : SAE 1045 - SAE 1085 Diameter Range :1,04MM - 4,19MM Coating Thickness :30gr/m2 - 300 gr/m2 Wire Number : 2 - 19 Usage : Enviromental Security Systems Construction Industirial Purpose Packing: on wooden reels Z2 - Z3 coils
PATENTED GALVANÄ°ZED WIRE: Related Standards :ISO EN 10257-1 & 2, ISO EN 10244-2, ASTM A461 Raw Material :DüÅ?ük, Orta ve Yüksek Karbon (max. 0,90%C) Diameter Range :0,80mm - 10,00mm Coating Thickness :30gr/m2-380gr/m2 Wire Grades :GR34-GR65-GR85-GR105-GR125-GR145-GR165 Usage Industirial Purposes Enviromental Security Systems Agriculture Forestry and Animal Husbandry Automotive Packing : According to customers request either in rosette coils or cheeswound(treverse) coils or wooden steel reels or on carriers
The characteristics of solid tires Solid tires are tires that do not need to be inflated and do not need to be filled with liquid, sponge or other non-solid material, made entirely of rubber, with a certain hardness and elasticity, for carrying the vehicle load and walking tires. 120Ton 8-15inch 150Ton 8-20inch 200Ton 8-25inch Hydraulic tire press machine(solid tire press machine) is a tire dismounting device used to disassemble rims and tires with retaining rings. Placing the tire on the workbench when you use it, it will press the ram on the rim and press it into the tire. The tire press can be divided into a manual tire press and an electric tire press according to the mode and size of the exercise. The electric tire press is generally suitable for the disassembly and assembly of heavy automobile tires.
Anping tenglu metal wire mesh co., ltd Twilled weave stainless steel wire mesh Product description: Twilled weave stainless steel wire mesh/cloth is producing square openings, it can be made from larger diameter wire than plain weave wire mesh. Twilled weave is the most commonly wire mesh used in the filtration and separation industries. For twilled weave, wire diameters of warp and weft are the same size, and each warp wire passes alternately over two and then under two weft wire, and each weft wire passes over/under two warp wire. Benefits: Square hole or rectangular hole High screening precision Small opening size > 0.025 mm Flexible, strength, and durability Good corrosion-resistance Low hardness and easy to clean Materials: Stainless steel 200 series : grade 201, grade 202 Stainless steel t 300 series : grade 304, grade 304l, grade 316, grade 316l, grade 321 Stainless steel 400 series : grade 410, grade 420, grade 430 Application: In the water, oil & gas industries, for the raw material of filter element. In the petrochemical & chemical industries, for test sieve and structured packing. Packaging:wooden box Our service: Materials certification Customized size
Anping Tenglu Metal Wire Mesh Co.,LTD 410/430 Magnetic Stainless Steel Wire Mesh Product Description: 410 SS is the general purpose hardenable, corrosion and heat resisting steel. It readily responds to hardening and tempering operations between 1100-1350°F. With different heat treatments this steel develops excellent combinations of strength and toughness over a wide range of mechanical properties. 410 SS is resistant to dry atmospheres, fresh water corrosion, and a variety of mild acids and alkaline. It is a common choice for severe forming and cold heading operations, particularly if heat treating of the part is desirable. Type 410 is magnetic in all conditions. 410 SS has a wide variety of uses due to its good mechanical properties. Materials:410(SUS410,S41000),430(SUS430,S43000) Feature: 410 stainless steel wire mesh is magnetic and of good corrosion resistance 430 stainless steel wire mesh has good resistance to stress corrosion and oxidation. 410/430 magnetic stainless steel wire mesh has good thermal conductive performance than austenitic stainless steel series. Its thermal expansion coefficient is smaller than austenitic. Resistant to thermal fatigue, add the stable element titanium, mechanical performance of welded parts is good. With magnetism, 410/430 stainless steel wire mesh is also called magnetic stainless steel wire mesh, stainless iron wire mesh, magnetic stainless iron wire mesh. Application: 410/430 stainless steel wire mesh is mainly used in manufacturing parts which are resistant to air,steam,water and oxidizing acid corrosion. 410/430 stainless steel wire mesh can be used for industrial filtering, food industry filtering, sugar industry filtering etc.
Anping Tenglu Metal Wire Mesh Co.,LTD Expanded Metal Square Mesh Product Description: Square mesh: Their large surface with relatively low weight per square meter guarantees proper use in the area of air handling, filter, audio-thermal insulation, partitions and railings production etc. Its aesthetic potential inspires architects to creative solutions. This type of expanded metal is usually supplied in flattened version. Most available in sheet formats: 1x2m , 1,25x2,5m. Materials: Steel (suitable for consecutive finish edit - galvanizing or welding) Aluminium Stainless steel Feature: Application: It is defined by its large surface with relatively low weight per square meter, therefore it is fittingly used mainly in air-conditioning, for acoustic purposes and production of suspended ceilings, grills, partitions or filters.
Vertical Shaft Impact Crushers, medium-sized material by breaking all kinds of hard and abrasive sand and gravel 0.5 mm were used to obtain a high cubical percentage of sand content crushers. Crushing process, the crusher through the feed hopper fed with high-speedspinning rotor material crushing chamber with high velocity launch takes place withstone lining. Crushed operating ,stone hitted stone by crusher due to the realization of a crusher spare part consumption is extremely economical and low-cost type. VERTICAL SHAFT IMPACT CRUSHER OF USES AREA Breaking of natural stones used of the river material, Small-sized materials to be processed at the mill rate by reducing the size of the materials of cement material, broken only by bringing the maximum rate Cubic material if requested on limestone, basalt and dolomite quarries The production of sand, gravel and gravel production for Asphalt concrete production to be used Structures, including road asphalt materials used in the production of fine-grainedproducts To increase the rate of carbon steel with liquid spraying method is used to reduce the size of the added coal to coke. STANDART SPECIFICATIONS 1. Electric motor power unit (used for upper body trim and belt). 2. Maintenance platform 3. Two separate drive pulley for speed (1400 r / min - 1600 r / min).). 4. Maintenance crane 5. 3 pieces SKF or FAG brand bearing used in drive system.
Specifications: 1) Grade: 201,202,301,303,304,304L,305,316,316L,321,410,416,420,430,2205... 1.4301, 1.4306, 1.4845, 1.4401, 1.4371, 1.4597,1.4541, etc 2) Standard: ASTM, EN,DIN,JIS 3) Diameter: 0.05-20mm 4) Surface: bright, cloudy,plain,black 5) Type: spring,welded,tig,mig etc soft and hard 6) Packing: in coil or in spool then in carton or as your request Terms: 1) Loading Port: Shanghai 2) Delivery term: FOB,CFR, CIF 3) Delivery lead time: 10 working days after received deposit. 4) Payment term:30% by T/T as deposit., balance will be paid by T/T , 5) Quality assurance: Mill Test Certificate is supplied with shipment, third Party Inspection is acceptable Product Application: With bright surface, slight magnetism and no cracks on forming, is widely used in bicycle fittings, kitchen and sanitation tools, goods shelf, pet cages, gill racks, decorative handles and baskets, food and medical machinery accesses, etc. Our advantage: Our range of Wire made of Stainless Steel are not only known for their variety but are also known for their good quality, long life and very reasonable prices. Quality and service is our first priority, we effectively use technically advanced machinery equipment and the expertise of our work to deliver our stainless steel wired products
Introduction: The product is widely used in spraying and polishing surfaces of copper, aluminum, zinc and stainless steel workpieces, and has the advantages of matte effect, metallic character highlighting and rust-less property, ect. To processed workpieces, the processed workpiece do not need addtional cleaning of steel, and the durability is 3-5 times of steel shots, and the product can reduce the production costs. Features of blasting media stainless steel shot: A. High strength, high ductility, long service life; B. Low breakage, low wear, little dust; C.Low wear of the equipment, long life of accessory; D. Reduce dedusting system load, lengthen usage time of dedusting equipments. Blasting media stainless steel shot is always used for: A. Ship-building and ship-repariring B. Coating and corrosion processing of steel structures C. Railway vehicle coating D. Preventing corrosion of engineering machiner E. Preventing corrosion of welded pipes F. Preventing corrosion of port machinery G. Coating containers H. Strengthening surfaces of castings and forgings I. Intensifying surfaces of polished and sprayed shots J.Cleaning non-ferrous and stainless steel
Introduction: Specifications: Carbon steel cut wire shot Shape: spherical (conditioned) and cylinder (as cut) Specs: 0.2mm-2.5mm Durability:6500 times Moq: 25kgs Sample free Certificate:iso9001:2008, gb/t470-1997 Standards: ams 2431, mil-s-13165c, din8201, vdf 8001, saej827, saej441, jb/t8354 Usage: shot blasting;shot peening;surface cleaning, rust remove, surface treatment
Specification: 1. Soft annealed and hard drawn 2. Diameters 0.035 mm - 5.50 mm.
Wire rod and debars
Applications: 1) diameter size:3/4inch-8inch 2) mainly use in factories, agriculture, engineering, foodstuffs and sanitation. 3) have three grades: agriculture, industry, food. 4) working temperature: -10. Characteristics: 1) with steel wire screwing inlaid in the hose. 2) transparent, with small bending radius. 3) has good adaptability to hard weather conditions and minus pressure. 4) with red and blue symbol lines. As customer's requirement
All steel wir for fishing net technical details show below: Diameter: 1.18¡¨¤ 0.03mm Zinc coating: > 150g/cm2 Tensile strength: > 1500MPa Elongation: > 4% 36 line/bundle X 4 bundles = 144 lines =1 coil = 45kgs=36 m/line(big coil) 45 kgs/coil X 555 coils = 25000 kgs =1 container Diameter: 1.06¡¨¤ 0.03mm Zinc coating: > 160g/cm2 Tensile strength: > 1500MPa Elongation: > 4% 36 line/bundle X 5 bundles = 180 lines = 1 coil = 45kgs=36 m/line(big coil) 45 kgs/coil X 555 coils = 25000 kgs =1 container Package: Plastic inside, and knitting strip outside.
Steel Wire.
Diameter : Specifiable from 5.0 mm up to 16.0 mm Quality : In various internationally well known standards including afnor (nf), Aisi, astm, bs, din, euronorm, gost, jis, iso, sae, si, ts, uni, etc. (eg. St 37.2 Din 17100, nfa 35015, sae 1006, 1008, 1010, 1012, 3 sp/ps , 1kp, 08 kp Gost 380 88, etc) suitable for mesh making and drawing into smaller Diameter wires. Tolerances : As per astm a 510, or equivalents Packing : In form of small (350-550 kg), medium size (about 1.000 kg) and heavy (upto 2.100 kg) coils depending on the producing mill
We specialize in the manufacture and export of carbon steel wire for more than six years. We supply low, middle and high carbon steel wires un-galvanized of diameters from 0.20mm to 14.00mm, and the galvanized from 0.20mm to 6.50mm. The galvanized wires are zinc-plated galvanized and hot-dipped galvanized. We output about 2500 tons every month according to din17223-1, gb/t4357-89, jis g 3521, en10270-1, din2078-90, astm a475 and so on. In coil, spool and so on
