Vertical Shaft Impact Crushers, medium-sized material by breaking all kinds of hard and abrasive sand and gravel 0.5 mm were used to obtain a high cubical percentage of sand content crushers. Crushing process, the crusher through the feed hopper fed with high-speedspinning rotor material crushing chamber with high velocity launch takes place withstone lining. Crushed operating ,stone hitted stone by crusher due to the realization of a crusher spare part consumption is extremely economical and low-cost type. VERTICAL SHAFT IMPACT CRUSHER OF USES AREA Breaking of natural stones used of the river material, Small-sized materials to be processed at the mill rate by reducing the size of the materials of cement material, broken only by bringing the maximum rate Cubic material if requested on limestone, basalt and dolomite quarries The production of sand, gravel and gravel production for Asphalt concrete production to be used Structures, including road asphalt materials used in the production of fine-grainedproducts To increase the rate of carbon steel with liquid spraying method is used to reduce the size of the added coal to coke. STANDART SPECIFICATIONS 1. Electric motor power unit (used for upper body trim and belt). 2. Maintenance platform 3. Two separate drive pulley for speed (1400 r / min - 1600 r / min).). 4. Maintenance crane 5. 3 pieces SKF or FAG brand bearing used in drive system.
Specifications: 1) Grade: 201,202,301,303,304,304L,305,316,316L,321,410,416,420,430,2205... 1.4301, 1.4306, 1.4845, 1.4401, 1.4371, 1.4597,1.4541, etc 2) Standard: ASTM, EN,DIN,JIS 3) Diameter: 0.05-20mm 4) Surface: bright, cloudy,plain,black 5) Type: spring,welded,tig,mig etc soft and hard 6) Packing: in coil or in spool then in carton or as your request Terms: 1) Loading Port: Shanghai 2) Delivery term: FOB,CFR, CIF 3) Delivery lead time: 10 working days after received deposit. 4) Payment term:30% by T/T as deposit., balance will be paid by T/T , 5) Quality assurance: Mill Test Certificate is supplied with shipment, third Party Inspection is acceptable Product Application: With bright surface, slight magnetism and no cracks on forming, is widely used in bicycle fittings, kitchen and sanitation tools, goods shelf, pet cages, gill racks, decorative handles and baskets, food and medical machinery accesses, etc. Our advantage: Our range of Wire made of Stainless Steel are not only known for their variety but are also known for their good quality, long life and very reasonable prices. Quality and service is our first priority, we effectively use technically advanced machinery equipment and the expertise of our work to deliver our stainless steel wired products
Introduction: The product is widely used in spraying and polishing surfaces of copper, aluminum, zinc and stainless steel workpieces, and has the advantages of matte effect, metallic character highlighting and rust-less property, ect. To processed workpieces, the processed workpiece do not need addtional cleaning of steel, and the durability is 3-5 times of steel shots, and the product can reduce the production costs. Features of blasting media stainless steel shot: A. High strength, high ductility, long service life; B. Low breakage, low wear, little dust; C.Low wear of the equipment, long life of accessory; D. Reduce dedusting system load, lengthen usage time of dedusting equipments. Blasting media stainless steel shot is always used for: A. Ship-building and ship-repariring B. Coating and corrosion processing of steel structures C. Railway vehicle coating D. Preventing corrosion of engineering machiner E. Preventing corrosion of welded pipes F. Preventing corrosion of port machinery G. Coating containers H. Strengthening surfaces of castings and forgings I. Intensifying surfaces of polished and sprayed shots J.Cleaning non-ferrous and stainless steel
Introduction: Specifications: Carbon steel cut wire shot Shape: spherical (conditioned) and cylinder (as cut) Specs: 0.2mm-2.5mm Durability:6500 times Moq: 25kgs Sample free Certificate:iso9001:2008, gb/t470-1997 Standards: ams 2431, mil-s-13165c, din8201, vdf 8001, saej827, saej441, jb/t8354 Usage: shot blasting;shot peening;surface cleaning, rust remove, surface treatment
Specification: 1. Soft annealed and hard drawn 2. Diameters 0.035 mm - 5.50 mm.
Wire rod and debars
Applications: 1) diameter size:3/4inch-8inch 2) mainly use in factories, agriculture, engineering, foodstuffs and sanitation. 3) have three grades: agriculture, industry, food. 4) working temperature: -10. Characteristics: 1) with steel wire screwing inlaid in the hose. 2) transparent, with small bending radius. 3) has good adaptability to hard weather conditions and minus pressure. 4) with red and blue symbol lines. As customer's requirement
All steel wir for fishing net technical details show below: Diameter: 1.18¡¨¤ 0.03mm Zinc coating: > 150g/cm2 Tensile strength: > 1500MPa Elongation: > 4% 36 line/bundle X 4 bundles = 144 lines =1 coil = 45kgs=36 m/line(big coil) 45 kgs/coil X 555 coils = 25000 kgs =1 container Diameter: 1.06¡¨¤ 0.03mm Zinc coating: > 160g/cm2 Tensile strength: > 1500MPa Elongation: > 4% 36 line/bundle X 5 bundles = 180 lines = 1 coil = 45kgs=36 m/line(big coil) 45 kgs/coil X 555 coils = 25000 kgs =1 container Package: Plastic inside, and knitting strip outside.
Steel Wire.
Diameter : Specifiable from 5.0 mm up to 16.0 mm Quality : In various internationally well known standards including afnor (nf), Aisi, astm, bs, din, euronorm, gost, jis, iso, sae, si, ts, uni, etc. (eg. St 37.2 Din 17100, nfa 35015, sae 1006, 1008, 1010, 1012, 3 sp/ps , 1kp, 08 kp Gost 380 88, etc) suitable for mesh making and drawing into smaller Diameter wires. Tolerances : As per astm a 510, or equivalents Packing : In form of small (350-550 kg), medium size (about 1.000 kg) and heavy (upto 2.100 kg) coils depending on the producing mill
We specialize in the manufacture and export of carbon steel wire for more than six years. We supply low, middle and high carbon steel wires un-galvanized of diameters from 0.20mm to 14.00mm, and the galvanized from 0.20mm to 6.50mm. The galvanized wires are zinc-plated galvanized and hot-dipped galvanized. We output about 2500 tons every month according to din17223-1, gb/t4357-89, jis g 3521, en10270-1, din2078-90, astm a475 and so on. In coil, spool and so on
We supply middle and high carbon steel wires ungalvanized and galvanized of diameters from 0.20mm to 14.00mm. The galvanized wires are zinc-plated galvanized and hot-dipped galvanized. E output about 2500 m.Ton every month according to din17223-1, gb/t4357-89, jis g 3521, en10270-1, din2078-90, astm a475 standards and so on.
0.3mm hot dipped low carbon steel wire 1.Diameter: 0.3mm 2.T/s: 350mpa~500mpa 3.Zinc coating: 30g/m2 En 10244
Type: 1)steel wire rope for elevator Construction:8x19s+fc, 8x19s+iwrc Diameter:8-30mm 2)steel wire rope for crane hoist Diameter: 6x25fi, 6x29fi, 6x31sw, 6x36sw Diameter:6.0-42 mm 3)steel wire rope for suspended platform Construction:4x19, 4x25, 4x26, 4x31, 4x36, 4x41 Diameter:8-46mm
1)name: pc strand (prestress concrete steel strand) 2)construction: 1x7 3)diameter: 0.8-15.7mm 4)surface: galvanized or ungalvanized, non coated 5)tensile strength: 1570-1960 mpa 6)standard:astm a421-98, bs 5896-1980, gb5224-2003 7)application:highway, bridge, building etc Packing:1000m rool or as your order
ADVANTAGES OF CORED WIRES 1. Wire feeding technology can make fine adjustment of the chemistry of metal. Wire feeding technology can also Increase alloy element's recycling rate. (Ca up to 30%). 2. The steel liquid treated by wire feeding technology is stable and well-mixed, Secondary oxidation will be avoided. The mixture will speed up to float. The steel liquid will be clear and well mixed. 3. Wire feeding can prevent air being brought into the steel liquid. 4. Wire feeding technology has good adaptability, need small investment, and has good application range. 5. Wire feeding technology need simple facilities, simple operations, and is environment tally friendly. Jiangyin Star Wei Alloy Material Co., Ltd. is located in Shengang town, Jiangyin City, Jiangsu Province which in the south of Binjiang Century Avenue and Yangtze River; in the north of Cheng-Chang Road, and only 5 kilometers from Jiangyin Bridge which well-known as Asia First Bridge, transportation is very convenient. We are leading company which is specialized in manufacturing alloy cored wire, the current annual production capacity is 10,000 tons per year, diameter ¦µ13mm and ¦µ16mm respectively. Our product can be continued using as it was packed in inside pay-off coil which is simple for operation, no-change joint. Cored wire varieties are: Ca-Si wire, earth wire, Ca-Al wire, Fe-Ti wire, S-Fe wire, Carbon wire, Boron wire. We produce above cored wires according to the National Standard or according to customer¡¯s requirement. We always take the ¡°Customer First, Quality First¡± as our company spirit since the company established. Besides, we focus on the improvement of product quality and technology to strengthen market competitiveness. We are honored that our company received good reputation and satisfied all the customers.
1) Material: AISI304, AISI316, AISI316L,etc; 2) Diameter: 0.3mm-33mm; 3) Construction: 1x7, 1x19, 7x7, 6x7+FC,7x19, 6x19+FC, 6x19+IWRC, 7x37, 6x37+FC, 6x24+7FC, 19x7, etc; 4) Packing: plywood reel, plastic reel, iron reel 5) Polished ss wire ropes are also available
1) Material: electro galvanized, hot dip galvanized; 2) Diameter: 0.8mm- 30mm; 3) Construction: 1x7, 1x19, 7x7, 6x7+FC,7x19, 6x19+FC, 6x19+IWRC, 7x37, 6x37+FC, 6x24+FC, 19x7, etc; 4) Packing: plywood reel, plastic reel, coils
1) Ungalvanized wire ropes 2) Dry or with lubrication; 3) Diameter: 2mm-60mm; 4) Construction: 7x7, 6x7+FC, 7x19, 6x19+FC, 7x19, 6x24+7FC, 6x19+IWRC, 7x37, 6x37+FC, etc. 5) Packing: plywood reel, iron reel.
1) Wire rope sling 2) Material: ungalvaninzed, galvanized, stainless steel; 3) Diameter: 6mm-100mm
