Carbon steel pipe is a kind of long steel which is made of ingot or solid round steel by perforation, and then hot rolled, cold or cold drawn. The steel pipe has a hollow section and is primarily made for the transportation of products including fluids, gas, pellets, powders, and more, such as oil, natural gas and water. Product name: Line pipe, carbon steel pipe,oil and gas; Standard: API 5L PSL2 Steel grade: Gr.B, X42, X46, X52, X56, X60, X65, X70 etc. Size: 1/2-24 inch Wall thickness: SCH10, SCH20, SCH30, STD, XS, SCH60, SCH80, SCH100, SCH120, SCH160, XXS. Length: single radom or double radom Coating: black painting, 3PE coating, FBE coating.
As one of the carbon steel pipe fittings suppliers, we produces well-equipped, with advanced pipe fittings supporting production lines, forging, forging, if push system, machining, cold forming, hot extrusion, heat treatment and other exquisite workmanship, with chemical analysis, metallographic analysis, physical testing, nondestructive testing, such as advanced detection capabilities. Processing equipment more than 20 units, forming more than 200 sets of molds, basically covering all specifications of the production of pipe fittings, is one of the strongest manufacturers in the region. Can produce international, with internal standards of high, medium pressure of various specifications of stainless steel, alloy steel, carbon steel elbow, tee and other products. Above products, can export trade, with material processing, drawing custom.
Large diameter steel pipe has good adhesion, corrosion resistance, which can be resistant to acid, alkali and other chemical corrosion, non-toxic, does not rust, abrasion resistance, impact resistance, permeability, smooth pipe surface will not adhere to any substance, can reduce the transmission of resistance, large diameter steel pipe to improve traffic and transportation efficiency, reduce delivery pressure loss. Product name: carbon steel pipe, seamless pipe, large diameter; Standard: ASTM, ASME and API; Grades: B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS or NS); Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Galvanized steel pipe is the carbon steel pipe that are coated with a protective layer of zinc. The zinc layer served as a sacrificial layer, it will get rust before the carbon steel under neath it. Galvanized steel pipe is divided into cold galvanized steel pipe, hot dipped galvanized steel pipe. Galvanized layer will strengthen the anti-corrosion performances of steel pipe. 5.Galvanized steel pipe have long lifetime. But in different conditions the lifetime of use are different. Generally speaking, 13 years in heavy industrial district, 50 years for ocean environment, 104 years in suburbs, 30 years in city. In fact galvanizing have played a role of anti- rusty, it is no need other rust treatment. Product name: galvanized carbon steel pipe, hot dipped galvanized steel pipe, cold galvanized steel pipe; Standard: ASTM, ASME and API; Grades: ASTM A106 Gr. B/C, API 5L Gr. B, ASTM A53 Gr. B.API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80and higher. PSL-1/PSL-2; Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Galvanized steel pipe USES is very wide, in addition to a general low pressure fluid such as water, gas, oil line pipe, also used as oil industry, especially the ocean oil field oil well pipe, oil pipe, chemical coking equipment of oil heater, the condensing, exchange of coal distillation wash oil cooler for tube, and trestle pile, mining tunnel supporting frame tube, etc. Hot dip galvanized steel pipe is widely used in all kinds of modern manufacturing industry. Product name: Galvanized steel pipe, steel pipe ; Standard: ASTM, ASME and API; Form: Round, Square, Rectangular Etc; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Outer Diameter: 20MM~508MM; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Steel pipes have many different uses in manufacturing. Guardrails are one of the most common uses, providing safety features not only for stairs and balconies, but also for cyclists and pedestrians on the street. In addition., steel tubes can also be used as safety bollards to isolate vehicles and protect people, buildings or infrastructure. Third, steel pipe is also a choice for outdoor site decoration. Finally, many commercial bicycle frames are made of bent steel pipes. This has the advantage that steel's high toughness and strength make it resistant to thieves. Product name: steel pipe, structure steel pipe; Standard: ASTM, ASME and API; Grades: API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80and higher. PSL-1/PSL-2. ASTM A106 Gr. B/C. ASTM A53 Gr. B; Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
The most common use of steel pipes is for the transportation of products, as the characteristics of their raw materials are well suited for long-term installation. As the best way to transport oil and natural gas, steel pipe transportation has become the best choice for oil and natural gas transportation because of its larger volume and continuous flow, faster, more economical, less injection capital, less land, low cost, and the advantages of automatic control. Because of these advantages, many places also use steel pipes to transport solid energy, such as coal. The principle of pipeline transportation is the use of the principle of the connector, through the pressure difference so that the fluid in the tube from high to low flow. During the conveying process, the pressure of the fluid decreases gradually due to friction loss and elevation difference. To pressurize the fluid, long-distance transport requires intermediate pumping or compressor stations. Product name: steel pipe, transportation; Standard: ASTM, ASME and API; Grades: API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80and higher. PSL-1/PSL-2. ASTM A106 Gr. B/C. ASTM A53 Gr. B; Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Seamless steel pipe is a circular pipe having a hollow section and no seams around it. The seamless steel pipe is made of carbon steel, alloy steel, stainless steel ingot or solid tube blank, and then is made by hot rolling, cold rolling or cold drawing. The quality of end product pipes, entirely depends upon both factors quality control during the manufacturing process and the initial condition and quality of raw materials. Seamless steel pipes can be divided into hot rolled seamless pipes, cold drawn pipes, precision pipes, hot expanding pipes, cold spinning pipes and extruded pipes. Product name: Line line, Seamless steel pipe; Standard: ASTM, ASME and API; Grades: API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80and higher. PSL-1/PSL-2. ASTM A106 Gr. B/C. ASTM A53 Gr. B; Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10. SCH 20, SCH 40, SCH STD, SCH 80, SCH XS to SCH 60; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Welded pipes is steel plate or steel belt, and the surface is a pipe with welding ribs after cutting, bending, welding and other processes. The main advantages of welded pipes are their lower inherent cost, narrower tolerances for wall thickness, concentricity (OD/ID) and internal surfaces that can be checked prior to manufacture. Welded steel pipe is divided into furnace welding pipe, electric welding (resistance welding) pipe and automatic arc welding pipe because of its different welding forms into straight seam welding pipe and spiral welding pipe two kinds, because of its end shape is divided into round welding pipe and special-shaped (square, flat, etc.) welding pipe. Seamed pipes offer tighter tolerances but thinner wall thickness rather than seamless pipes. Welding pipe can be used for water pipeline, gas pipeline, heating pipeline, electrical pipe and so on. Product name: steel line, welded steel pipe, API 5L; Standard: API 5L PSL2; Grades: B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS or NS); Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Low temperature steel pipe refers to the steel pipe used in low temperature environment below -10. The steel usually used at low temperature of -10~-196 is called low temperature steel, and the steel used at low temperature below -196 is called ultra-low temperature steel, which has enough notch toughness. Low temperature steel pipe is mainly used in the production of ethylene, propylene, urea, synthetic ammonia, compound chemical fertilizer and washing, purification, desulphurization and degreasing in pharmaceutical industry with petroleum, chemical, natural gas and coal as raw materials, as well as cryogenic equipment manufacturing, ultra-low temperature cold storage, transportation of ultra-low temperature liquefied gas pipeline and its pipe components.
High temperature steel pipe is the steel pipe used in high temperature environment. This kind of steel pipe needs to have certain high temperature resistance, will not decline in high temperature environment, but also has certain corrosion resistance.High temperature steel pipe is often used in exhaust pipe, heat treatment furnace, heat switch, incinerator and other pipeline projects that require heat resistance, because the medium in chemical pipeline, power plant boiler pipeline is mostly some high temperature gas, liquid, some also have certain corrosion.
Galvanized steel pipe USES is very wide, in addition to a general low pressure fluid such as water, gas, oil line pipe, also used as oil industry, especially the ocean oil field oil well pipe, oil pipe, chemical coking equipment of oil heater, the condensing, exchange of coal distillation wash oil cooler for pipe, and trestle pile, mining tunnel supporting frame pipe, etc. Hot dip galvanized steel pipe is widely used in all kinds of modern manufacturing industry. Material Standard: ASTM, ASME and API 5L PSL2; Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Form: Round, Square, Rectangular Etc Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Black steel pipe is uncoated steel, also known as black steel. The dark color comes from iron oxide that forms on its surface during manufacturing. When the steel pipe is forged, a black oxide skin is formed on its surface, giving it the finish seen on this type of pipe. Material Standard: ASTM, ASME and API; High Temperature Steel Pipe: ASTM A106 Gr. B/C, API 5L Gr. B, ASTM A53 Gr. B; Low Temperature Steel Pipe: ASTM A333 Gr. 3/6X; High Yield Steel Pipe: API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80and higher. PSL-1/PSL-2; Form: Round, Square, Rectangular Etc; Outer Diameter: 20MM~508MM; Wall thickness: SCH 10. SCH 20, SCH 40, SCH STD, SCH 80, SCH XS, to SCH 160; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps;
Carbon steel pipes for carbon content less than 0.25%, due to its low strength, low hardness and soft, it is also known as mild steel. It includes most common carbon structural steel and a part of high quality carbon structural steel. The steel pipe has a hollow section and is widely used in machinery, architecture, oil, natural gas, central station, boiler, power station, ship, chemical, environmental protection, food and other industries. Material Standard: ASTM, ASME and API; High Temperature Carbon Steel Pipe: ASTM A106 Gr. B/C, API 5L Gr. B, ASTM A53 Gr. B; Low Temperature Carbon Steel Pipe: ASTM A333 Gr. 3/6; High Yield Carbon Steel Pipe: API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80and higher. PSL-1/PSL-2; Form: Round, Square, Rectangular Etc; Outer Diameter: 20MM~508MM; Wall thickness: SCH 10. SCH 20, SCH 40, SCH STD, SCH 80, SCH XS, to SCH 160; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, FBE and 3PE, Cladding and Lined etc.
A106 is a stainless steel pipe material. A106 seamless steel pipe is used for conveying water, oil, gas and other high temperature fluid of a seamless steel pipe. A106 export seamless steel pipe is divided into A106-A, A106-B two models. A106-a is equivalent to the domestic 10# steel, and A106-B is equivalent to the domestic 20# material, which is A kind of steel pipe material commonly used at home and abroad. A106 seamless steel pipe is mainly used in construction, mechanical processing, electrical, petrochemical and other industries. Material standard: ASTM A106 Gr. A/B; Form: Round, Square, Rectangular Etc Outer Diameter: 20mm~508mm; Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Spiral steel pipe is a spiral seam steel pipe, which is made of strip coil plate as raw material, often formed by warm extrusion, and welded by automatic double-wire and double-side submerged arc welding process. Adopting advanced double-sided submerged arc welding technology, the welding can be achieved in the best position, not easy to appear the wrong edge, welding deviation and penetration defects, easy to control the welding quality.
According to the American Iron and Steel Institute (AISI), ferrous material is designated as carbon steel when its core makeup is specified to include no more than 1.65 percent manganese, 0.60 percent silicon and 0.60 percent copper and when no minimum content is specified for other alloying elements. Carbon steel pipe enjoys wide use across many industries due to its strength and ease of workability. Because it contains relatively few alloying elements and in low concentrations, carbon steel pipe is relatively inexpensive. Material Standard: ASTM, ASME and API; High Temperature Carbon Steel Pipe: ASTM A106 Gr. B/C, API 5L Gr. B, ASTM A53 Gr. B; Low Temperature Carbon Steel Pipe: ASTM A333 Gr. 3/6; High Yield Carbon Steel Pipe: API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80and higher. PSL-1/PSL-2; Form: Round, Square, Rectangular Etc; Outer Diameter: 20MM~508MM; Wall thickness: SCH 10. SCH 20, SCH 40, SCH STD, SCH 80, SCH XS, to SCH 160; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, FBE and 3PE, Cladding and Lined etc.
Alloy steels are what they sound like: Steels that include specified amounts of alloying elements. Generally, alloying elements make steels stronger and more resistant to impact or stress. While the most common alloying elements include nickel, chromium, molybdenum, manganese, silicon and copper, many others are used in the production of steel. High-alloy types of steel are favored in the piping industry for service in extreme conditions, whether it be in hot or cold conditions or subject to rough use. Thatâ??s because the combination of chemistry and proper heat treating can yield strong yet ductile pipe that can take a beating. The oil & gas and power generation industries often favor alloy pipe due to its toughness.
API 5L Seamless steel pipe production methods can be divided into: Hot-rolled seamless pipe, Cold drawn (rolled) pipe and pipe, Thermal expansion pipe, Cold spinning pipe and Squeeze pipe. Standard: API SPEC 5L (Latest edition) Grades: B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS) Steel Pipe Dimensions OD: 1/2â?? to 2â??, 3â??, 4â??, 6â??, 8â??, 10â??, 12â??, 16 inch, 18 inch, 20 inch, 24 inch, 26 inch to 40 inch. Pipe Weight Schedule Thickness: SCH 10. SCH 20, SCH 40, SCH STD, SCH 80, SCH XS, to SCH 160 Ends Type: Beveled ends, Plain ends Length Range: 20 FT (6 meter), 40FT (12 meter)or customized Protection Caps in plastic or iron Surface: Natural, Varnished, Black painting, FBE and 3PE, Cladding and Lined etc CRA Clad and lined pipe available (Carbon steel + cladding or lined alloy steel material)
There are 3 welding types: ERW (Electric Resistance Welding), LSAW (Longitudinally Submerged Arc Welding), and SSAW (Spirally Submerged Arc Welding) welding types. Welded (ERW, LSAW, SSAW) steel line pipe: 1/2â?? to 60â?? Range of Thickness: SCH 10 to SCH 160 Ends Type: Beveled ends, Plain ends Range of length: 20FT, 40FT or customized Protection Caps in plastic or iron available Surface appearances: Natural, Varnished, Black painting, 3PE, FBE, etc
