Chinese suppliers hs code bs 1387 hot dip galvanized steel pipe with low price 1. Product name:galvanized steel pipe / welded steel pipe 2. Size: 1)od:19~406mm(1/2inch~16inch) in theory 2)thickness:0.25~30mm 3)length: any length below 16 meter 3. Standard: gb/t3091-2008 astm a53 bs1387 bs en39 astm a500 bs 4568 bs en31 4. Material 1)chinese gradeQ215 q235 according to gb/t700; q345 according to gb/t1591 2) foreign grade:Astm/en/jis 5. UsageUsed for water, gas, stream, combustible fluids and construction 6. Ends:Plain, beveled, thread with couplings or sockets; plastic caps and steel rings can be provided if possible 7. Surface: bared, galvanized, oiled, color paint, 3pe; or other anti-corrosive treatment 8.Inspection:with chemical composition and mechanical properties analysis; Dimensional and visual inspection, also with nondestructive inspection 9. TechniqueHot rolled , cold rolled, erw or according to your requirement 10. PackageHexagon shape bundle, covered with tarpaulin, containers or in bulk 11. Date of delivery7-25days after receive your down payment or l/c 12.Method of paymentT/t l/c
Astm a333 seamless low temperature steel pipe Standard: astm a333 Materials: gr.1, gr.3, gr.6 Application: low temperature Size: od:10.3-660mm Wt:1.6-60mm Length:5.8-12mlong Packaging:, internal oil dipped, beveled end both with caps, fixed with steel strip, then wrapped with woven bags and also can depend on customers requirement.
Application: cold drawn or cold rolled precision seamless steel pipe (gb3639-83)is kind of high precision seamless steel tube used in petrochemical industry, wind energy, mechanical structure, hydraulic equipment etc. Feature: 1, for small and medium caliber precision steel tube, the diameter tolerance of d
Lsaw (longitudinal submerge-arc welded) uo(uoe), rb(rbe), jco(jcoe) Dsaw (double submerged arc welded) Steel grade: Bs:1387, en10217:s185, s235, s235jr, s235 g2h, s275, s275jr, s355jrh, s355j2h, st12, st13, st14, st33, st37, st44, st52 Astm a 53: gr. A, gr b, gr c, gr.D Api 5l: a, b, x42, x46, x52, x56, x60, x65 x70 Gb/t9711: l175, l210, l245, l290, l320, l360, l290, l320, l360, l390, l415, l450, l485, l555 Gb/t3091, sy/t5037, sy/t 5040, cj/t 3022:q195, q215, q235, q275, q295, q345, 08f, 08, 08al, 08f, 10f, 10, hg5, df08 sphc, m8 Size: Lsaw, dsaw: Outer diameter: 219mm-1820mm Wall thickness: 5.0mm-50mm Length: 6mtr-18mtr End:square ends (straight cut, saw cut, and torch cut). Or beveled for welding, beveled, Surface: lightly oiled, hot dip galvanized, electro galvanized, black, bare, varnish coating/anti rust oil, protective coatings (coal tar epoxy, ? fusion bond epoxy, 3-layers pe) Packing:plastic plugs in both ends, hexagonal bundles of max. 2, 000kg with several steel strips, two tags on each bundle, wrapped in waterproof paper, pvc sleeve, and sackcloth with several steel strips, plastic caps. Test:chemical component analysis, mechanical properties (ultimate tensile strength, yield Strength, elongation), technical properties (flattening test, bending test, blow test, impact test), exterior size inspection, hydrostatic test, x-ray test. Sign Size O.D. (mm) Wall thickness (mm) Nominal weight (kg/m) Test pressure (mpa)
The material :Q195,Q235,SPHC The size :12mm-100mm* 0.6*1.8mm*5.8m-12m ZN=200-550G/m2
The material £ºQ195,Q235,SPHC,ASTM A36,ASTM A105/A53GRB The size :OD £º1/4¡¯¡¯-24¡¯¡¯*6m/9m/12m
The material :Q195,Q235,SPHC The size :12mm-100mm* 0.6*1.8mm*5.8m-12m
Standard: Api, astm, gb, api 5l, ansi b36.10m-2004, asme b36.10m-2004, gb/t 8162-1999 Grade: A53-a369, q195-q345, st35-st52, a106(b, c), a333 gr6, a53(a, b), q235, q345, st37, st52 Thickness: 1.5 - 45 mm Section shape: Round Outer diameter: 21.3 - 1220 mm Place of origin: Tianjin, china (mainland) Secondary or not: Non-secondary Application: Structure pipe Technique: Erw Certification: Ce Surface treatment: Black painted, with oil or as required Special pipe: Erw steel pipe Alloy or not: Non-alloy Commodity: Erw steel pipe Length: 5.8m, 11.8m, 4-12m or as required Steel grade: 1020 1045 a106b st37 st52 Price terms: Fob, crf, cif, exw Shape: Round section
Standard Jis, gb, din, astm, api, jis g3461-2005, jis g3455-2005, jis stpg370, gb/t 8163-1999, din 1626, din 1629/3, din 1629/4, din 2391, din 17175, din 2448, astm a106-2006, astm a53-2007, astm a210-1996, ansi a210-1996, api 5l Grade 10#-45#, 16mn, a53-a369, st35-st52, stpg42, q195-q345, 20#, 16mn, a53(a, b), a106(b, c), a210, a178-c, st52, st42, st45, st42-2, st45-8, st45-4, stpg42, q235, q345 Thickness 2.5 - 80 mm Section shape Round Outer diameter 25 - 356 mm Place of origin Shandong, china (mainland) Secondary or not Non-secondary Application Fluid pipe Technique Hot rolled, hot rolled/cold drawn seamless Certification Api Surface treatment Paint Special pipe Thick wall pipe Alloy or not Non-alloy Od 34mm to 325mm Wall thickness 2.5mm to 80mm Langth 5m to 12m Ends Be/plain Surface Bare/oil/paint/varnish Brand Huitong Origin China, liaocheng Certificates Api5l, api5ct, iso, mtc, bv, sgs Packing Steel strap in bundles
Standard: Api, astm, bs, gb, jis, api 5l, astm a106-2006, astm a252-1998, astm a53-2007, astm a660-1996, astm a671-2006, astm a672-2006, bs en10025, bs en10217, bs en10219, gb/t3901, gb/t9711, jis g3444-2006, jis g3445-2006 Grade: 16mn, a53-a369, q195-q345, st35-st52, 16mn, a53(a, b), q235, q345, st52 Thickness: 3.2 - 30 mm Section shape: Round Outer diameter: 168.3 - 3048 mm Place of origin: Tianjin, china (mainland) Secondary or not: Non-secondary Application: Oil pipe Technique: Saw Certification: Api Surface treatment: Other Special pipe: Api pipe Alloy or not: Non-alloy
Specification LSAW Steel Pipe Longitudinal Submerged-Arc Welded Steel Pipe Usage: Used for low pressure liquid delivery, such as water, gas, and oil. Process: LSAW - UO(UOE)?RB(RBE)?JCO(JCOE) DSAW -Double Submerged arc welded Standard: API 5L, API 5CT, ASTM 53, EN10217, DIN 2458. IS 3589, GB/T3091, GB/T9711 Certificate: API 5L PSL1 / PSL2, API 5CT Out Diameter: 355.6mm– 1626mm Wall Thickness: 8 -50mm Length: up to 12m Steel Grade: API 5L: GR B, X42,X46, X56, X60,X65,X70 ASTM A53: GR A, GR B, GR C EN: S275, S275JR, S355JRH, S355J2H GB: Q195, Q215, Q235, Q345, L175, L210, L245, L320, L360- L555 Surface: Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer’s requirement Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test. Mill Test Certificate: EN 10204/3.1B Wall Thickness API 5L Line Pipe API 5L Line Pipe STEEL GRADE API 5L PSL1/PSL2 GR B , X42, X46, X52, X60, X65, X70 STEEL CHEMICAL COMPOSITION STEEL GRADE % by mass, Maximum C Si Mn P S GR B 0.26 0.40 1.20 0.030 0.030 X42 0.26 0.40 1.30 0.030 0.030 X46 0.26 0.40 1.40 0.030 0.030 X52 0.26 0.40 1.40 0.030 0.030 X56 0.26 0.40 1.40 0.030 0.030 X60 0.26 0.40 1.40 0.030 0.030 X65 0.26 0.40 1.45 0.030 0.030 X70 0.26 0.40 1.65 0.030 0.030 MECHANICAL PROPERTIES STEEL GRADE Yield strength, min. psi (MPa) Tensil strength, min. psi (MPa) Elongation in 2 in., min. % GR B 245 415 X42 290 415 X46 320 435 X52 360 460 X56 390 490 X60 415 520 X65 450 535 X70 485 570 TEST REQUIRED Chemical Analysis, Mechanical Test, Visusal Inspection , Tension Test, Dimension Check Bend Test , Flattenting Test, Impact Test, DWT Test, NDT Test Hydrostatic Test, Hardness Test..... ASTM A53 Steel Pipe ASTM A53 GR B Steel Pipe STEEL CHEMICAL COMPOSITION The steel shall conform to the following requirements as to chemical composition: STEEL GRADE Composition Max, % C Mn P S Cu Ni Cr Mo V GR B 0.30 1.20 0.05 0.05 0.40 0.40 0.40 0.15 0.08 MECHANICAL PROPERTIES STEEL GRADE Tensile Strength ,min, Psi ( MPA) Yield Strength , min, psi, ( MPA) GR B 60 000 (415) 350 000 (240)
ERW Steel Pipe Electric Resistance Welded Steel Pipe Usage: Used for low pressure liquid delivery, such as water, gas, and oil. Oil drilling and machinery manufacturing, etc. Process: ERW : Electric Resistance Welded pipe HFI: High Frequency Induction weld pipe EFW: Electric Fusion Welded Pipe Standard: API 5L, API 5CT, ASTM 53, EN10217, DIN 2458. IS 3589, JIS G3452, BS1387 Certificate: API 5L PSL1/ PSL2, API 5CT Out Diameter: 21.3mm -660mm Wall Thickness: 1.5mm-22.2mm Length: 0.3 – 18m Steel Grade: API 5L : GR B, X42,X46, X56, X60,X65,X70 ASTM A53: GR A, GR B, GR C EN: S275, S275JR, S355JRH, S355J2H GB: Q195, Q215, Q235, Q345, L175, L210, L245, L320, L360- L555 Surface: Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer’s requirement Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test. Mill Test Certificate: EN 10204/3.1B Wall Thickness API 5L Line Pipe API 5L Line Pipe STEEL GRADE API 5L PSL1/PSL2 GR B , X42, X46, X52, X60, X65, X70 STEEL CHEMICAL COMPOSITION STEEL GRADE % by mass, Maximum C Si Mn P S GR B 0.26 0.40 1.20 0.030 0.030 X42 0.26 0.40 1.30 0.030 0.030 X46 0.26 0.40 1.40 0.030 0.030 X52 0.26 0.40 1.40 0.030 0.030 X56 0.26 0.40 1.40 0.030 0.030 X60 0.26 0.40 1.40 0.030 0.030 X65 0.26 0.40 1.45 0.030 0.030 X70 0.26 0.40 1.65 0.030 0.030 MECHANICAL PROPERTIES STEEL GRADE Yield strength, min. psi (MPa) Tensil strength, min. psi (MPa) Elongation in 2 in., min.% GR B 245 415 X42 290 415 X46 320 435 X52 360 460 X56 390 490 X60 415 520 X65 450 535 X70 485 570 TEST REQUIRED Chemical Analysis, Mechanical Test, Visusal Inspection , Tension Test, Dimension Check Bend Test , Flattenting Test, Impact Test, DWT Test, NDT Test Hydrostatic Test, Hardness Test..... ASTM A53 GR B Data Sheet ASTM A53 GR B Data Sheet STEEL CHEMICAL COMPOSITION The steel shall conform to the following requirements as to chemical composition: STEEL GRADE Composition Max, % C Mn P S Cu Ni Cr Mo V GR B 0.30 1.20 0.05 0.05 0.40 0.40 0.40 0.15 0.08 MECHANICAL PROPERTIES STEEL GRADE Tensile Strength ,min, Psi ( MPA) Yield Strength , min, psi, ( MPA) GR B 60 000 (415) 350 000 (240)
Alloy Pipes Specification: ASTM A335 is a ASTM standard specifies Seamless Ferritic Alloy Steel Pipe for High-Temperature Service. ASTM A335 pipe ordered to this specification shall be suitable for bending and similar forming operations, and for fusion welding. Selection will depend upon design, service conditions, mechanical properties, and high-temperature characteristics. Steel Grade: ASTM A335 GR P5 | GR P9 | GR P11 | GR P22 | GR P91 | GR P92. Size (mm): O.D.: 51-508; W.T.:7~60; L: max 12000 and other specifications in accordance with customer requirements. Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting,Epoxy & Fbe Coating Painting as requested. Mechanical Properties: Standard Steel Grade Tensile Strength (MPa) Yield Strength (MPa) Elongation (%) Impact Energy(J) Rigidity ASME SA335 SA335 P11 =415 =205 =22 =35 =163HB SA335 P12 =415 =220 =22 =35 =163HB SA335 P22 =415 =205 =22 =35 =163HB SA335 P5 =415 =205 =22 =35 =187HB SA335 P91 585~760 =415 =20 =35 =250HB SA335 P92 =620 =440 =20 =35 =250HB Grade and Chemical Composition (%) Grade C Mn P, S, max Si Cr Mo P11 0.05-0.15 0.30-0.60 0.025 0.50-1.00 1.00-1.50 0.44-0.65 P22 0.05-0.15 0.30-0.60 0.025 0.50 max 1.90-2.60 0.87-1.13 P5 0.15 max 0.30-0.60 0.025 0.50 max 4.00-6.00 0.45-0.65 P9 0.15 max 0.30-0.60 0.025 0.25-1.00 8.00-10.00 0.90-1.10 P91 0.08-0.12 0.30-0.60 0.020/0.010 0.20-0.50 8.00-9.50 0.85-1.05 V 0.18-0.25 N 0.03-0.07 Ni 0.40 max Al 0.02 max Nb 0.06-0.10 Ti 0.01 max P92 0.07-0.13 0.30-0.60 0.020/0.010 0.50 max 8.50-9.50 0.30-0.60 V 0.15-0.25 N 0.03-0.07 Ni 0.40 max Al 0.02 max Nb 0.04-0.09 W 1.50-2.00 B 0.001-0.006 Ti 0.01 max Zr 0.01 max Ordering Information Orders for material under this specification should include the following, as required, to describe the desired material adequately: Quantity Feet, meters, or number of lengths Name of material Seamless Alloy Steel Pipe Grade STANDARD AND STEEL GRADE Manufacture Hot-finished or cold-drawn Size using one of the following: NPS and Schedule Number Outside Diameter and Nominal Wall Thickness Length Specific or Random End Finish
ASTM/ASME Standard Alloy Pipes Specification: ASTM A519- specification covers for several grades of carbon and alloy steel mechanical tubing, either hot-finished or cold-finished. The steel used in the mechanical tubing may be cast in ingots or may be strand cast. When steel of different grades is sequentially strand cast, identification of the resultant transition material is required. The seamless tubing is a tubular product made without a welded seam. It is usually manufactured by hot working steel, and if necessary, by subsequently cold finishing the hot-worked tubular product to produce the desired shape, dimensions and properties. The tubes shall be furnished in the following shapes: round, square, rectangular and special sections. Heat analysis shall be made to determine the percentages of the elements specified. If secondary melting processes are used, the heat analysis shall be obtained from one remelted ingot or the product of one remelted ingot of each primary melt. The tubing shall be coated with a film of oil before shaping to retard rust when specified.
ASTM/ASME Standard Alloy Pipes Specification: ASTM A213M-09 Standard Specication for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, Heat-Exchanger Tubes. This standard is issued under the fixed designation A 213/A 213M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (') indicates an editorial change since the last revision or reapproval. Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested. Mechanical properties: Steel Grade Tensile StrengthN/mm2(min) Yield StrengthN/mm2(min) Elongation % (min) TP304 515 205 35 TP304L 485 170 35 TP316 515 205 35 TP316L 485 170 35 TP321 515 205 35 T11 =415 =205 30 T12 =415 =220 --- T13 =415 =205 30 Chemical Composition(%, max) Steel Grade C Si Mn Cr Ni Mo S P TP304 0,08 0,75 2 18 - 20 8 - 11 - 0,03 0,04 TP304L 0,035 0,75 2 18 - 20 8 - 13 - 0,03 0,04 TP316 0,08 0,75 2 16 - 18 11 - 14 2 - 3 0,03 0,04 TP316L 0,035 0,75 2 16 - 18 10 - 15 2 - 3 0,03 0,04 TP321 0,08 0,75 2 17 - 20 9 - 13 - 0,03 0,04 T11 0.05-0.15 0.50-1.00 0.30-0.60 0.5-1.0 --- 1.0-1.5 =0.25 =0.025 T12 0.05-0.15 =0.50 0.30-0.61 0.80-1.25 --- 0.44-0.65 =0.25 =0.025 T13 0.05-0.15 =0.50 0.30-0.60 1.90-2.60 --- 0.87-1.13 =0.25 =0.025 Ordering Information Orders for material under this specification should include the following, as required, to describe the desired material adequately: Quantity Feet, meters, or number of lengths Name of material Seamless Alloy Steel Pipe Grade STANDARD AND STEEL GRADE Manufacture Hot-finished or cold-drawn Size using one of the following: NPS and Schedule Number Outside Diameter and Nominal Wall Thickness Length Specific or Random End Finish
ASTM/ASME Standard Alloy Pipes AISI 4140 is a chromium molybdenum alloy steel specification widely used in the oil and gas industry. Similar to grade AISI 4130 but with a slightly higher carbon content. American Iron and Steel Institute (AISI 4140) is a member of the low alloy tool steel family characterized by small quantities of trace elements added to an otherwise simple steel. These trace elements, when compared with more simple steel such as 1040, improves the characteristics of 4140 . However, because 4140 remains relatively simple, it is used in a wider range of applications than more specialized tool steels like the D or S series of steel. Heat Treatment AISI 4140 has enough carbon present to allow for adequate heat treatment. Recommended hardening procedures are to bring the steel up to 1,675 degrees Fahrenheit for normalization (removal of stress within the steel). After it cools properly, heat the steel to 1,550 degrees Fahrenheit before quenching it in oil. The toughness of the steel makes machining in its hardened form difficult. However, after annealing the steel at 1,600 degrees followed by a slow cooling, the steel is much softer and far easier to machine. It can then be heat-treated after machining to produce a hard, precise item. Applications
Alloy Pipes GB/T8162 GB/T8163 GB3087 GB6479 GB9948 GB5310 GB/T17396 20G, 20MnG, 25MnG, 15MoG, 12Cr2MoG, 15CrMoG, 12Cr1MoVG, 12Cr2MoWVTiB, 10Cr9Mo1VNb Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested. Ordering Information Orders for material under this specification should include the following, as required, to describe the desired material
ASTM/AISI Standard Alloy Round Bar AISI 4140 is a chromium molybdenum alloy steel specification widely used in the oil and gas industry. Similar to grade AISI 4130 but with a slightly higher carbon content. American Iron and Steel Institute (AISI 4140) is a member of the low alloy tool steel family characterized by small quantities of trace elements added to an otherwise simple steel. These trace elements, when compared with more simple steel such as 1040, improves the characteristics of 4140 . However, because 4140 remains relatively simple, it is used in a wider range of applications than more specialized tool steels like the D or S series of steel. Specifications · Grade: Alloy steel · Standard: AISI, ASTM, BS, DIN, GB, JIS · OD:10-500mm · Thickness: Max:800mm · Width: 205mm~2300mm · Length: 1000mm~6000mm · Place of Origin: China (Mainland) · Model Number: 1.7220 / SCM430 / 30CrMo4 / 4130 ; 4140/42CrMo4/1.7225; En24 34CrNiMo6 1.6582 4340. · Application: Mould steel · Technique: Forged · Special Use: Mold Steel ,Statically and dynamically stressed components for vehicles, engines and machines. For parts of larger cross-sections, crankshafts, gears. · Shape: Round bars/Flat bar/Plate · Technology: Hot Rolled/Forged/Clod Draw · Heat treatment: Annealing/Q+T · Surface treatment:Black/Peeling/Polishing/Machined · Delivery condition: Hot rolled or forged/ Peeled or black surface/annealed or QT · Customer's logo: Available · Test: SGS/UT100%/Elements testing · Certificate: ISO/Mill certificate · Experience: Ten years manufacturer experience General Scope One of the most popular alloys for Oil Field applications, a high proportion of which is in Tubular form for downhole tools and accessories.
ASTM/ASME Standard Alloy Pipes Specification: Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service. ASTM A333 standard covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. ASTM A333 alloy pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation. All seamless and welded pipes shall be treated to control their microstructure. Tensile tests, impact tests, hydrostatic tests, and nondestructive electric tests shall be made in accordance to specified requirements. Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested.
ASTM/ASME Standard Alloy Pipes AISI 4130 is a low alloy steel containing molybdenum and chromium as strengthening agents. The carbon content is nominally 0.30% and with this relatively low carbon content the alloy is excellent from the fusion weldability standpoint. The ASTM A519 4130alloy can be hardened by heat treatment. We offers an extensive range of ASTM A519 4130seamless mechanical tubing is manufactured to meet your specific application requirements. Controlled modifications and adjustments are made to the tube making process for each order and take into consideration end use and all finishing operations (including heat treatment) that will be performed after you have received the tubing. General Scope This grade is similar to 4140 in scope which has a higher carbon level giving 4130 an advantage when it comes to weldability, this weldability is achieved at the cost of through section hardenability. AISI 4130 steel is a low alloy steel that is used in structural designs that may be found in applications such as aircraft engine mounts or welded tubing. It is well known for its ease of welding and ability to harden in commercial applications. It is commonly referred to as chromium-molybdenum steel. Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested. Composition Specifications of AISI 4130 Range C Si Mn P S Cr Mo Min 0.28 0.15 0.4 - - 0.8 0.15 Max 0.33 0.35 0.6 0.035 0.04 1.1 0.25 Mechanical Specifications of AISI 4130 Condition Hardened & Tempered UTS 100KSI min 0.2% Proof Stress 80KSI min Elongation 20% min Reduction of Area 40% min Ordering Information Orders for material under this specification should include the following, as required, to describe the desired material adequately: Quantity Feet, meters, or number of lengths Name of material Seamless Alloy Steel Pipe Grade STANDARD AND STEEL GRADE Manufacture Hot-finished or cold-drawn Size using one of the following: NPS and Schedule Number Outside Diameter and Nominal Wall Thickness Length Specific or Random End Finish
