Own factory production, hot rolled steel coil, cold rolled steel coil, factory price
If you are searching for hot work steel suppliers in Mumbai, then your search ends here contact TGK Special Steel one of the largest manufacturer of Hot Work Steel, They offer hot work tool steel in range of shapes, sizes, and plating's with superior qualities. For the greatest deal on tool steel items, please get in touch tgkssl.com.
Steel Coils
Thickness :0.1-200mm width 1200mm Coil weight: 5 ton/coil or as your requirement
We supply Australian-made metal coils to your specifications. Coated Steel: COLORBOND steel ZINCALUME steel GALVASPAN steel DECKFORM steel TRUECORE steel GALVABOND steel ZINC HI-TEN steel ZINCANNEAL steel G2S ZINCFORM steel Other Pre-painted Uncoated Steel: XLERPLATE steel TRU-SPEC steel REDCOR steel EMBAR steel Cold Rolled Coil Hot Rolled Coil
We supply Australian made metal coils to your specifications. Coated Steel: COLORBOND steel ZINCALUME steel GALVASPAN steel DECKFORM steel TRUECORE steel GALVABOND steel ZINC HI-TEN steel ZINCANNEAL steel G2S ZINCFORM steel Other Pre-painted Uncoated Steel: XLERPLATE steel TRU-SPEC steel REDCOR steel EMBAR steel Cold Rolled Coil Hot Rolled Coil
Cold-rolled steel coil in various thickness, may request to slit to desired width or cut to desired sheet length. Thickness 0.2~3mm Width max 1220mm. Specs: JIS G3141 or equivalent (Such as EN / ASTM / AS / NZS) / as per requested. Grade: SPCC-SD, SPCC-1B, SPCD-SD or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Hot-rolled steel coil in various thickness, may request to slit to desired width or cut to desired plate length. Thickness 1.2mm~25.4mm. Width max 2.428mtr, subject to thickness. Specs: ASTM / JIS G3101 / JIS G 3131 / JIS G3132 / JIS G3113 / BSEN 10025 or equivalent / as per requested. Grade: A36, A516, A588, A283, SS400, SS490, S275, S355, SPHC, SAPH or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
The company mainly produces galvanized steel coil, the size can be customized Material: SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Hardness: full hard Thickness: 0.12-4.0 Galvanized: 30-600 g/m Coil inner diameter: 508mm/610mm Technology: Based on hot rolling
Secondary coil (WATERMARK) - Width : 1219 mm; Thickness 0.8 MM (ZINC 120), 0.85 MM (ZINC 120), 0.9 MM (ZINC 275), 1 MM (ZINC 275), 2 (ZINC 275), 2.3 MM (ZINC 120); FLAT RATE OF AED 3600 PER M TON Location : Jabel Ali Free Zone Area; Dubai; United Arab Emirates
Graphite steel rolls are composed mainly of pearlite with spherical graphite and some carbide. Graphite steel rolls are stronger than cast iron rolls and harder than other steel rolls. The feature of graphite rolls that is better resistance to fire crack and scale adhesion.
UBJECT UNSOLD: COLD ROLLED COILS,COLD ROLLED SHEETS,COLD ROLLED STRIPS, OVER-ROLLING,3RD CHOICE,2ND CHOICE,4TH CHOICE; QUANTITY: 3330 TON ORIGIN: Italy PRICE: your best bid TERMS OF PAYMENT: 30% ADVANCE + 70% AGAINST BL COPY DELIVERY TERMS: CFR - COST AND FREIGHT DOCUMENTS PROVIDED: EUR1 CERTIFICATE
Product Name: Galvanized steel coil Material: SGCC, DX51D+Z or as required Standard: AISI, ASTM, BS, DIN, GB, JIS Thickness: 0.1mm-2.0mm Width: 30mm-2000mm Zinc coated: Z20g-Z275g Surface treatment: "1. Galvanized 2. PVC,Black and color painting 3. Transparent oil,anti-rust oil 4. According to clients requirement" Coil weight: 3-8 Tons or as required MOQ: 1 Ton Capacity: 200,000 tons/year Delivery time: "1-100 tons, 7-10 days >100 tons, Negotiable" Packing: Standard exporting packing or as requirements Payment terms: TT, L/C, Western Union, etc
Hot dipped galvanized steel coils are produced by base material of cold rolled steel coil through the process of cleaning, annealing, zinc hot dipping, skinpass, tension-level, passivation and coiling. Our galvanized coils are produced on the basis of advanced production technique. Galvanized coils are widely used as base materials for prepainted steel coils, home appliance industry, construction, application for civil use, transportation, vehicle and shipbuilding industries. PRODUCT DETAILS: Thickness: 0.2mm-1.40mm Width: 700mm-1250mm Steel Grade: SGCC,DX52D,DX53D Zinc Coating: 30 275G/M2 Inner ID: 508mm, 610mm Coil Weight: Max. 12 tons Surface Treatment: Skin Pass, Passivation, Unoil Package: domestic simple package, export fine package
Hot dipped galvanized steel coils are produced by base material of cold rolled steel coil through the process of cleaning, annealing, zinc hot dipping, skinpass, tension-level, passivation and coiling. Our galvanized coils are produced on the basis of advanced production technique. Galvanized coils are widely used as base materials for prepainted steel coils, home appliance industry, construction, application for civil use, transportation, vehicle and shipbuilding industries. PRODUCT DETAILS: Thickness: 0.2mm-1.40mm Width: 700mm-1250mm Steel Grade: SGCC,DX52D,DX53D Zinc Coating: 30 275G/M2 Inner ID: 508mm,610mm Coil Weight: Max. 12 tons Surface Treatment: Skin Pass, Passivation, Unoil Package: domestic simple package, export fine package
Products ValueLam 4500HC-4 45" Hot/Cold 4 Roller Roll Laminator at Harisefendi provide a 100% money back guarantee and 100% safe, Because Harisefendi� the best of the best.We sell some of the best brands such as MIMAKI, ROLAND, MUTOH, SUMMA, SPECTRA, RICOH, SEIKO, U-MARQ, CANON, EPSON, HP, GRAPHTEC, XAAR, etc. And purchase Product Description Four roller laminators are designed for encapsulating documents, posters, etc. The newly designed ValueLam 4500 HC-4 is the ideal value-priced Laminating/Mounting Machine for large-format imaging output up to 44" wide. Throughput performance is improved over that of the original ValueLam 4500 HC by way of an additional set of pull rollers and forced air cooling fans for faster throughput. The ValueLam 4500 HC-4 laminator also features hot and cold lamination with dual heated rollers, release liner take up, 1/2" mounting capability and extra take up mandrel for automatic roll up of laminated prints. The ValueLam 4500 HC-4 runs all types of both cold and heat-set pressure sensitive laminates and adhesives and encapsulating with the true thermal laminates. Also featuring a "heat assist" mode (top roller heat only), the ValueLam 4500HC-4 laminator delivers the perfect heat level to increase initial adhesion and clarity of slow curing pressure sensitive films lessening the time to receive finished output suitable for display. The ValueLam 4500HC-4 is made in the USA. Usage Commercial Width 45" Min/Max Film Thickness 1.5 - 10 mil Core Size 3" Laminating Type Hot/Cold Heating Method Heated Rollers Heat Roller Diameter 3" Warm Up Time 25-30 Min Reverse Switch Yes Speed (Feet per Minute) 0-10 fpm Adjustable Temperature Yes - Independent for top and bottom Control Panel LED Readout Ready Light No Safety Auto Shutoff No Safety Shield 1 Feed Table Safety Switch No Key Lock No Mounting Capability 1/2" Electrical Requirements 20 amps, 120 VAC, 60Hz Machine Dimensions 56"L x 21"H x 30"D Weight 236 lbs Shipping Weight 474 lbs Net Weight 236 Country Of Origin USA
Products Xyron 6300 63 inch Cold Roll Laminator at Harisefendi provide a 100% money back guarantee and 100% safe, Because Harisefendi the best of the best.We sell some of the best brands such as MIMAKI, ROLAND, MUTOH, SUMMA, SPECTRA, RICOH, SEIKO, U-MARQ, CANON, EPSON, HP, GRAPHTEC, XAAR, etc. And purchas Product Description The Xyron 6300 is a 63" cold wide format roll laminator. This highly effective and efficient laminator allows you to both apply laminate, adhesive or both without the use of heat. The XM6300 delivers consistently even, edge-to-edge application of adhesive, and is environmentally safe. Simply feed your material into the machine, push a button and trim. No waiting, no smell and no mess. Accommodates documents up to 63" in width Even, edge to edge adhesive application Environmentally safe Fixed speed of 13fpm Emergency stop switch Foot pedal operation Color coded film loading Mounting capability of 3/16" Stand included Compatible with a variety of Xyron Laminating Film [Call for details] Machine dimensions: 79.8â?? x 21.7â?? x 54.7â?? Power Requirements: 110V One Year Mfr Warranty Usage Heavy Duty Width 63" Min/Max Film Thickness 2.7mil Core Size 3" (Uses Xyron Film Only) Laminating Type Cold Heating Method NA Reverse Switch No Ready Light No Safety Auto Shutoff No Feed Table Safety Switch No Mounting Capability Yes Mounting Thickness in mil 3/16" Electrical Requirements None Machine Dimensions 79.8â?? x 21.7â?? x 54.7â?? Weight 324 lbs Shipping Weight 421 lbs Net Weight 324 Free Shipping Yes Warranty 1 Year
Rolls are an important tool for the production of welded pipes and cold-formed steel. Our company adopts German COPRA software design, which combines the design advantages of the United States, Japan and other countries, combines the characteristics of the forming unit, and carries out the 5-step and 4-level design of the roll. The round pipe design uses the internationally advanced "W" hole type", "F-F" combination hole, which can be directly square or rounded. Product performance index: 1.Material: Cr12 GCr15 Cr12Mo1V1; Cr12MoV 7, high chromium alloy 2. Working surface hardness HRC58-62 3. Deep hardened layer , can be used for secondary repair The surface precision can reach international standards after grinding by treatment. Rolls can be customized according to your needs,for example different models, specifications and materials.
Item: Hot rolled steel plate Standard: ASTM, DIN, ISO, EN, JIS, GB, etc. Material: Q195 Q235 Q235B Q345 Q345B 20# 45# SS330 SS400 A36 ST37 16Mn SPHC SPHD SPH JIS G3131SPHC SPHD SPHE etc. Size: Width: 0.6 m-3 m, or as required Thickness: 0.1mm-300mm, or as required Length: 1m-12m, or as required Export to: America, Australia, Brazil, Canada, Peru, Iran, Italy, India, United Kingdom, Arab, etc. Package: Standard export package, or as required. Price term: EXW, FOB, CIF, CFR, CNF, etc. Payment: T/T, L/C, Western Union, etc. Certificates: ISO, SGS, BV. FOB price range:1000-6000 Supply Ability:Above 30000T From the quantitative:2T or more Delivery time:3-45 days Port Delivery:Qingdao, Shanghai, Tianjin, Ningbo, Shenzhen Using continuous casting slab or blooming slab as raw material, it is heated by a walking heating furnace, high-pressure water is descaled and then enters the rough rolling mill. The rough rolling material is cut head, tail, and then enters the finishing rolling mill for computer-controlled rolling.
The color-coated steel strip using hot-dip galvanized steel strip as the base material is protected by the zinc layer, and the organic coating on the zinc layer plays a role of covering and protection to prevent the steel strip from rusting. PRODUCT DESCRIPTION Product Properties The prepainted steel coil is a flat steel product coated with protective decorative paint. The polymer coating is available in a wide range of colors, as well as matte, glossy or decorative natural finishes (granite, wood, etc.). The prepainted galvanized steel coil is a color-coated steel strip protected by a zinc layer on a hot-dip galvanized steel strip base material. Organic coated galvanized steel is corrosion resistant, has excellent mechanical properties, plays a role in covering and protecting the steel strip from rusting, and can be formed, shaped or stamped. Brand: Xinnorda Standard: GB; ASTM; A792M Steel grade: Q235; Q345 Certification: ISO Surface treatment: spraying Technology: spraying after chemical degreasing and chemical conversion treatment, baking and curing. Application: Advertising industry, construction industry, home appliance industry, electrical appliance industry, furniture industry and transportation industry The color-coated steel strip uses a hot-dip galvanized steel strip as the base material is protected by the zinc layer, and the organic coating on the zinc layer plays a role of covering and protection to prevent the steel strip from rusting, the service life is longer than that of the galvanized strip. The color-coated rolls have a lightweight, beautiful appearance and good corrosion resistance. The colors are generally divided into gray, sea blue and brick red.
