11# mine i beam: mining i beam is commonly referred to mine steel, it is a type of mine steel, mainly used for the support of mine tunnel, flange width, height and thickness. Material: 20MnK Size: 11# If you are intrested in our products, and leave your message.
Type: 11# Heigh: 108-112 Leg width: 88 - 92 Web thickness: 8.4 - 9.6 Material: 20MnK
Mine i beam is commonly referred to mine steel, it is a type of mine steel, mainly used for the support of mine tunnel, flange width, height and thickness. Material: Q275B, Q275 Type: 12# Heigh: 118-122 Leg width: 93-97 Web thickness: 10.4-11.6 Material: Q275B, Q275
The size of 25u beam arch is Height: 110mm Thickness: 17mm Weight: 24.76kg/m Production: 103300T Surface treatment acid pickling Treatment Hot-rolled Material: 20MnK
The parameters of 29U beam arch is Material: 20Mnk Size: 29U Model: 29u Height: 124mm Thickness: 16mm Weight: 29.00kg/m Outside opening width: 150.5mm Cross section area: 925px2 Surface treatment: pickling Method: hot rolling section Shape: U shape
Angle Bar Angle steel bars are perpendicular elongated steel bars connected together as a wave-like product. There are equal angles and unequal angles. Angle steel bar is a simple sectioned carbon structural steel mostly used in metal products fabrication and construction of workshop. In application, it must has weldability, plasticity deformation performance and high mechanical strength. The raw material to produce angle steel is low-carbon billet. Finished product of angle steel is hot roll formed.
Rebar Bars: The rebar, also known as deformed bar, is a steel bar or mesh of steel wires used as a tension device in reinforced concrete and reinforced structures to strengthen and hold the concrete in tension. Rebar’s surface is often patterned to form a better bond with the concrete.
Channel Bar Channel bar, also known as C-Beam, are often used where the flat, back side of the web can be mounted to another flat surface for maximum contact area. The shape provides superior structural support, making it an ideal product for frames and braces used for machinery, enclosure, vehicle, building and structural support applications. They are also sometimes welded together back-to-back to form a non-standard I-beam.
Round Bars: Round steel bar is a round-shaped solid steel bar. It is hot formed, forged or cold formed. The specification of hot formed round steel is 5.5-250mm. The small round steel are normally distributed in bundles of 5.5-25mm, and is normally use to make steel bar, bolt and all kinds of mechanical parts. Round steel greater than 25mm are mainly use to make mechanical parts or seamless steel tube ring.
Square Bar: Square Bars are made from very high quality raw material which ensures high durability at its user end. These steel square bar are widely finds its applications in various industrial and commercial sectors.
The company brings forth the fines quality MS (mild steel) bright bars. Manufactured from the best raw steel alloys our steel bright bars are very strong and durable in nature. They are available in various shapes and sizes like round, square, flat and hexagonal. ROUNDS: 6mm to 80mm SQUARES: 6mm to 40mm HEXAGONALS: 6mm to 40mm We offer superior quality bright bars in a variety of grades, sizes and tolerances. Size Range 5mm - 100mm (1/5" - 4") Applications They are extensively used in the Automobile industry and products like nuts, rivets, studs, bolts, connecting rods, piston rods, drills, pouches, injector, connecting rods, axles, propeller shafts and many more. Supply Conditions Length - 3 to 6.5 Meters Cold Drawn, Centreless Ground, Peeled & Polished, Rough Peeled or Smooth Turned bars Tolerances - h9, h10, h11, k12, k13 Grit Polish as per Customer's Request Heat Treatment- Annealed, Solution Annealed or Water Quenched Bars End Finish - Chamfered ends, Plain ends without Burrs or Sharp Edges Specifications - As per EN, DIN, JIS, ASTM, BS, ASME, AISI, etc.
Another product in our range is Square Bars made by using premier quality steel for use in various structure like pump, shafts etc. Available Sizes 16 mm - 50 mm
We produce high quality well built and long lasting round bars for the construction industry that are idyllic in fastener application and cold drawing.
We manufacture high quality TMT Bars for automotive and shipbuilding industry having extraordinary properties such as weldability, bendability and durability at International level. Available Sizes 16 mm - 42 mm
This creation in our range is made by using the superior quality steel, which is applicable in food industry, steel furniture nuts and bolt etc. Available Sizes 12 mm - 50 mm
Raaj sagar steel is famous manufacturer and exporter in india. Ferrous and non ferrous metals are exported at cheaper rate with free home delivery. We have ready Stainless Steel 316H Round Bar Suppliers | SS 316H Round Bar Manufacturers in India. Stainless Steel 316H Round Bar Suppliers | SS 316H Round Bar Manufacturers. Get upto 20% discounts on every product. Visit our website to know more about discounts and offers. Address: 163, Dr.M. G. Mahimtura Marg, 3rd Kumbharwada,
Plain style steel grating Brand name: Xin BoYuan Material: Low carbon steel mild steel or stainless steel etc. Application: Commercial and industrial flooring including mezzanines catwalks platforms ramps subway and sidewalk grating. 1. Bearing bar specifications:The specification of plain type is 20*3 to 100*10 mm. 2. Bearing Bar pitch:12.5 to 100mm etc. 3. Cross Bar pitch:385076100101.6mm etc. also be according to client's requirement and 50100mm are recommended. 4. Material:Steel or Stainless Steel 5. Surface treatment: Untreated Painting or Ho t di pped galvanized 6. Steel grating standards: (1) China: YB/T4001 (2) USA: ANSI/NAAMM(MBG531) (3) UK: BS4592 (4) Australia: AS1657 (5) Japan: JJS The products are widely used in steel structure platforms, stair treads, sidewalks, drainages and well covers etc. We can design and manufacture standard steel grating and on customer's requests. Packaging & Delivery Packaging Details: 1. compacted before packaging. 2. Plastic packaging outside and on the pallet. or according to the customers' requirements 3. One 20'container can contain more than 8,000 square meters. 40' container can contain more than 15,000 square meters. Delivery Detail: 7-15days after prepayment. Company information Our company has more than 10 years' export experience in wire mesh production. Every week we will get order from customers from all over the world and load more than 5 containers goods. Middle East( Saudi Arabia, Iraq, Iran, Dubai, Turkey etc.),Euro (UK, Spain,Greece etc.) South America (Brazil, Mexico, Chile, Peru. Colombia,etc.), Australia, America,Canada. Our Advantages: 1) we have a professional team with rich experience 2) we have high efficient productive mechanical equipments and technology from Germany. 3) We are local manufacturer .we offer competitive price. 4) We stick to customers' requirements, we believe Excellent product, reasonable price and timely delivery is our service objective. please contact to us at anytime. And welcome to visit our factory! For accurate quotation, the following information would be needed: 1. Hole size: 2. Wire diameter: 3. Selvedge wire: 4. Lacing wire: 5. Surface treatment: hot dipped galvanized, galfan or PVC coated 6. Zinc content: 7. Diaphragm: 8. Length, width, height Price Price Condition : FOBPrice : USD0 / pcsDelivery Port : Tianjin Packaging & Delivery Packing :Plastic packaging outside and on the palletDelivery Lead Time : 7-15days after prepayment.Minimum Order : 1 pcsSupply Ability : 1000 Piece/Pieces per Day -
High speed tool steel cutting tool is mainly used for the manufacture of high efficiency. In the annealed state, the main alloying elements in high speed tool steel are tungsten, molybdenum, chromium, vanadium.
Product mode:PMLB-BST-175/260 Size(mm):80Ã?100 Packing:500PCS/ROLL MOQ(Roll):100 Shipped:By 20' container vessel Product advantages:Strong anti-tear,resistance friction,resistance dirt, resistance oil and resistance weather are very good,Outdoors can be stored for 2 years,the max resitance weather260°C;Suitable for bar code;Suitable end face weld The test must be carried out in a simulated real use environment. Wire rod in addition to the requirements of temperature, but also need good chemical resistance, such as pickling and so on. Our company made the special materials tag, can be high temperature at the same time, can be anti-pickling, waterproof, anti-ultraviolet and so on.
As of July 14, SteelHomes estimates of hot metal cost at 60 Chinese steel mills, averaged 1798.08 yuan/t (US$ 265.3) before 17% VAT, up 29.84 yuan/t (US$ 4.4) from one week ago. The cost to produce 20mmHRB400 rebar was 2950.58 yuan (US$ 435.4), increasing 43.57 yuan/t (US$ 6.4) from one week ago, and the costs to produce 5.75mmQ235 HRC was 2945.58 yuan (US$ 434.6), up 39.57 yuan/t (US$ 5.8).
