Fiberglass rebar area of application Fittings made of composite materials are a product of new technologies, the technical characteristics of which make it possible to successfully use it as an alternative to traditional steel fittings in construction of: Foundation; Marine and port facilities; Reinforcement of concrete tanks; Repair and strengthening of bearing capacity of brick and reinforced concrete structures; Road slabs, airfield slabs; For the production of small architectural forms; For the road paving and decking of highway bridges; The implementation of the infrastructure elements in the chemical industries; Repair of damaged brick and reinforced concrete structures; Fittings are used for constructions based on gypsum binders; Construction of swimming pools and industrial pools; The application of fiberglass fittings in civil and industrial construction is caused by many variables: Low specific gravity; High corrosion resistance; Low thermal conductivity of composite materials; High strength, several times the strength of steel fittings; Is a dielectric; Durability; As known, the main drawback of traditional low-carbon steel fittings is a low index of corrosion resistance, which limits their use in the construction of marine facilities and constructions located in the zone of variable water level.
Fiberglass mesh is designed to reinforce concrete structures instead of conventional metal reinforcement. It has the following advantages in relation to metal: 9 times lighter 3 times stronger corrosion resistant significantly accelerates the reinforcement process (knitting on the object is not necessary) no need to put chairs low thermal conductivity Composite bars are connected to the network using a unique patented technology, which uses high performance automatic equipment. The joint is also a stool that forms a protective layer of concrete. For different rod diameters, the height of the stool is different. The only restriction on the use of fiberglass mesh is the inability to operate at temperatures above 150 �° C, therefore, it is not recommended to reinforce structures that must meet special fire requirements: building floors of more than 3 floors, bridge columns, monolithic towers of more than 3 floors. With this exception, almost the entire range of concrete structures remains:
Sanitizing detergent with benzalkonium chloride BACTERICIDA Product Description "Bactericidal sanitizing detergent that controls bad odors and contributes to the decomposition of fats and sludge. In its formulation, fat emulsifying agents, non-ionic, catonic surfactants intervene, which give it a series of very advantageous physico-chemical properties to be used in all types of industries. It does not attack any type of surface, not even metallic ones. Lacks corrosive ingredients. Concentrated detergent. Made in Spain." Price of product ( USD price or FOB price) : USD 12,45 Product origin : Spain Key Specifications/Special Features : "Appearance: Blue transparent gel. Ph: 9.50 +/- 1.00 Density: 0.996 +/- 0.01 Smell: Balsamic pine" Minimum Order Size and Packaging details : Packing 4 units, Minimum Order Quantity
Product Type: Grade: 1000 Series Is Alloy, Is Secondary Specifications: Aluminum Ingots 99.99% / 99.9% /99.7% Brand: Aluminum alloy ingot Shape: Ingot. Color: Silver characteristic: Good casting, Good corrosion resistance Grade Chemical Composition % Alâ?¥ impurities Si Fe Cu Ga Mg Zn Mn others Sum Al99.9 99.90 0.50 0.07 0.005 0.02 0.01 0.025 - 0.010 0.10 Al99.85 99.85 0.80 0.12 0.005 0.03 0.02 0.030 - 0.015 0.15 Al99.7 99.70 0.10 0.20 0.010 0.03 0.02 0.030 - 0.030 0.30 Al99.6 99.60 0.16 0.25 0.010 0.03 0.03 0.030 - 0.030 0.40 Al99.5 99.50 0.22 0.30 0.020 0.03 0.05 0.050 - 0.030 0.50 Al99.00 99.00 0.42 0.50 0.020 0.03 0.05 0.050 - 0.050 1.00
The properties specified in the EN590 include: Centane number: a minimum of 51 Centane index: a minimum of 46 Polycyclic aromatic hydrocarbons: a maximum of 11% Water content: a maximum of 200 ppm Flash point: a minimum of 55 C Ash content: a maximum of 0.01% Viscosity at 40 degrees celsius: a minimum of 2 cst, and a maximum of 4.5 cst Density at 15 degrees celsius: a minimum of 820 Kg/m3, and a maximum of 845 Kg/m3 Total contamination: a maximum of 24 ppm Sulphur content: a maximum of 10 ppm Lubricity at 60 degrees celsius: a maximum of 460 microns Carbon residue: a maximum of 0.3% Copper strip corrosion for 3 hours at 50 degrees celsius: must have a Class 1 rating Oxidation stability: a maximum of 25 g/m3 Cloud point: the low temperature at which the wax in diesel begins to turn cloudy as it solidifies. This solidification of the wax thickens the oil, resulting in the fuel clogging the fuel filters and fuel injectors and fuel additive injectors in vehicle engines. CFFP - Cold filter plugging point: the minimum temperature at which the fuel can still flow through a filter FAME (Fatty Acid Methyl Esters) content of the bio-part
