Incheon Office Storage Systems Suppliers and Manufacturers

GRP panel is pressured at high temperature. It has excellent strength and durability. The surface of the GRP panel is beautiful, it is the most hygienic and easy to clean. GRP Insulating panel is filled with insulation all over the joint flange part, so it has high insulation. GRP panel is a corner panel type which made by integral molding method, so it is easy to assemble. As an internal protruding structure, large diameter fittings can be assembled at any position. If partition is installed, one can be used as potable water tank, and the other can be used as purified water tank, so it is economical. If you install different water tanks in basement or smaller space, you can install it with the maximum capacity by partition.

GRP Sectional Panel Tanks are constructed of panels made from SMC(Sheet Molding Compound) by hydraulic hot press under high temperature(150 ) and pressure conditions to maintain the best endurance. Using stainless steel for the interior structure and plated steel for the extreior, the panel exhibits excellent resistance to erosion. Easy installation with on-site bolt assembly and Tank shape and volume can be freely designed with no restrictions based on site location, weather or clmate. Sectional GRP Tanks can be supplied or installed by our experienced engineers. Specialized for United Arab Emirates

SMC panel is pressured at high temperature. It has excellent strength and durability. The surface of the SMC panel is beautiful, it is the most hygienic and easy to clean. SMC Insulating panel is filled with insulation all over the joint flange part, so it has high insulation. SMC panel is a corner panel type which made by integral molding method, so it is easy to assemble. As an internal protruding structure, large diameter fittings can be assembled at any position. If partition is installed, one can be used as potable water tank, and the other can be used as purified water tank, so it is economical. If you install different water tanks in basement or smaller space, you can install it with the maximum capacity by partition.

Sparkle water maker

Durable Power Saving Feature and Self- suppotive Cooling System Sanitary and Ergonomic Design Achieved Unlimited and Uninterrupted Dispensing Capability Low Noise and Vibraton Low Operation Cost to Easy Installation and Maintenance SPECIFICATIONS Dispensing Capacity(Max): 250cups/hour Consecutive Dispensing(Min): 24cups(100cc) Compressor: 1,100kcal/h Power Consumption: 2.4KW / 12A Refrigeration Capacity: Cylinker tank can start dispensing after 25 minutes (-4=½+fC) Cylinder Capacity: 2.8ℓ Mixing Tank Capacity: 11ℓ Rated Voltage: 220V / 50Hz / 1PH Weight: 150kg ompressor: Aspera Output: 1.4HP Current: 9A Dimension: 460X850X690(W x L x H) Weight: 150KGS

Ice cream freezer Durable Power Saving Feature and Self- suppotive Cooling System Sanitary and Ergonomic Design Achieved Unlimited and Uninterrupted Dispensing Capability Low Noise and Vibraton Low Operation Cost to Easy Installation and Maintenance SPECIFICATONS Dispensing Capacity(Max): 250cups/hour Consecutive Dispensing(Min): (24cups(100cc)) X 2 Compressor: 1,100kcal/h Power Consumption: (2.4KW / 12A) X 2 Refrigeration Capacity Cylinker: Tank can start dispensing after 25 minutes Cylinder Capacity: 2.8ℓ X 2 Mixing Tank Capacity: 11ℓ X 2 Rated Voltage: 220V / 50Hz / 1PH Weight: 270kg Compressor: Aspera Output: 1.4HP X 2 Current: 18A Dimension: 678X815X1500 (W/L/H) Weight: 270Kg

Slush Machine Mixing Tank Capacity Non-poisonous P.C Cabinet Stainless Steel panel(SUS304) Insulation material Urethane foam Legs Rubber packing Compressor Hermetic SPECIFICATIONS Exterior Dimensions: WxDxH(mm) 600x480x860 Power Consumption: 1,200W Operating Current: 6A Gear Motor: 67W x 2EA Compressor Fan Moter: 9W x 2EA Condenser Pin: Tube Type Evaporator Drum Type: With Tubes Dimention: WxDxH(mm) 600x480x860 Weight: 110Kg

Grp sectional panel water tank.Transportation and shiping

Office furniture..

Ice makers, ice cube machines, freezers, soft ice cream freezers, slush machines, show cases, shake machine.

Sparkle water maker, ice making machine, the parts of ice making machine.

[ Blister Packing Machine ] -For easy operation -For reasonable price -For effective mechanical system Model: KM-SS * Forming Method: Vacuum drum Forming * Sealing Method: Roll type heat seal * Capacity - Sugar-Coating Tablet: Max. 1, 400 Tabs/min - Plain Tablet: Max. 1, 200 Tabs/min - Hard Capsule: Max. 1, 400 Tabs/min - Soft Capsule: Max. 1, 200 Tabs/min * Packing Film - P. V. C Film: Max. 145mm - Al-Foil Film: Max. 145mm - Available width: Max. 135mm * Utilities - Required Power: 3phase AC 220V/380V/415V/440V, etc. 6kw - Cooling Water: 3 liter/min - Air Pressure: Higher than 5kg/cubic centimeter * Machine Dimensions: 1750(L) x 1000(W) x 1680(H)mm * Machine Weight: About 900kgs MODEL: KM-DS * Forming Method: Vacuum drum Forming * Sealing Method: Roll type heat seal * Capacity - Sugar-Coating Tablet: Max. 2, 800 Tabs/min - Plain Tablet: Max. 2, 400 Tabs/min - Hard Capsule: Max. 2, 800 Tabs/min - Soft Capsule: Max. 2, 400 Tabs/min * Packing Film - P. V. C Film: Max. 245mm - Al-Foil Film: Max. 245mm - Available width: Max. 235mm * Utilities - Required Power: 3phase AC 220V/380V/415V/440V, etc. 6kw - Cooling Water: 3 liter/min - Air Pressure: Higher than 5kg/cubic centimeter * Machine Dimensions: 1750(L) x 1100(W) x 1680(H)mm * Machine Weight: About 1, 100kgs

Remote start alarm.

Hi we are Ecocreation the manufacturing company in korea. We produce high quality pyrolysis plant. All the manufacturing process is held in Korea by Korean technicians. Here are some features of our Pyrolysis Plant. 1. Technology of converting waste plastics into Renewable energy 2. Superlative technology using proprietary catalyst control 3. Production of high quality oil for use in engines from waste plastics 4. Fundamental solution for social issues caused by abandoned waste plastics 5. No secondary pollutant source such as incinerator, SRF, and greenhouse reduction effect 6. FLASH POINT CONDermaTROL Due to the nature of the flash point, which is required differently depending on each field and application, we have installed a system that can control the flash point and produce oil with a flash point between 30 and 60 degrees. 7. SEPARATION OF NAPHTHA Ecocreation uses a principle of fractional distillation to extract high quality and high purity and stable oil by introducing a system that separates high-volatility gas which is naphtha. SPECIFICATION OF OUR ECOPLANT 40 cubic meters of capacity, batch type operation Dewaxing technology Safe and stable operation Emergency shut down system App. 45-90% yeild Three-Phases (220V or 380V) produced oil : diesel fraction Input material : waste plastic

Reverse vending machine is developed to recover and dispose recycled products more effectively. It first selects and separates the recycling product by its material. With empty pet bottles, the machine crushes and stores the pieces in designated container. With empty cans, the machine first compresses them, reducing the volume by 85%. Then it stores the compressed cans in designated container. Other substances will directly be stored in designated container without any processes. Reverse vending machine will cut down enormous time and cost for gathering recycling products, and help protecting environment with reducing co2 exhaustion. Standard packing

Machine converting waste plastics into oil : ecp-2011Ecp-2011(batch type, new model) : capacity max. 1 ton ~100 tons / dayIt is our pleasure to introduce our pyrolysis machine.Our pyrolysis machine is the world best and its features are as follows.Input material:pp, pe, ps and other waste plastic materials.Characteristics: it is not necessary to clean, separate and shred wasteplastics.Burner device, using oil or gas.Recycled oil and gas generated through the device itself are used as fuel, which reduces the running cost, by option.Ecp-2011(main heat source : oil or gas &electricity (little)Capacity max. 1 ton ~ 100 tons / dayIn the case of ecp-2011, it is allowed to input even mixed waste plastics like vinyl.Output from ecp-2011 is as follows.Output: produced oil(convert into oil percentage is approx.70~80% but it depends on the waste plastics type and operation circumstance)The produced oil consists ofover 80% of diesel fractionand etc.If you compare our machine¡¯s oil to other machine¡¯s produced oil, you will find that our machine¡¯s oil is much better quality than others due to over 80% of diesel fraction. The produced oil can be used for generators.If our machine¡¯s oil is used for producing an electricity, the government may give the benefit regardless of any country. Standard packing

Hydraulic power packs, geared pump, cartridge valve.

Pyrolysis system for plastic waste.

Electronics parts, transformer, telecommunication system.