Heat exchager, boiler. Economizer.Ice maker(machine).Pump.
Flange, heat exchanger, pump, building material (temporary), drinking water.
Epdm rubber sponge, epdm open cell sponge, epdm closed cell sponge, cr sponge, semi seamless stainless steel tube & pipe, pre-insulated tube, flange, valves, fittings, spiral wound gaskets, cold box core machine, heat exchanger, pressure vessel.Import, export & international freight forwarder
* Heat exchanger tube - OD : 12.7 mm ~ 50.8mm - Surface varnish optional - Also available for ASTM A213 T1,T2,T9 grade - U bending tube, Fin tube
Jis valve, ansi valve, strainer, safety valve, pressure reducing valve.
Hepa filter parts for air purifier, air conditioner, mask media.
Elliptical head We are manufacturing the steel head plate, elliptical heads, dish end of pressure vessel, heat exchanger, tower & columm, bellows, expansion joint, conical head for industial and plant facilities.
- Design Pressure : 2.3MPa - Volume capacity : 100~1000kg/hr - Material : SUS304 - Standard/Certificate : Registered a patent for practical new design of devices preventing fluids-flow out of electro thermal hot water carburetor, Registered a patent of practical new designs for liquefied gas using waste heat coolant.
Al-Brass: Al-Brass is an alloy containing aluminium. It is frequently used for heat exchangers due to its high corrosion and seawater resistance property. Application: Condenser for thermal/nuclear power generation, condenser for vessels, feedwater heater, etc. Al-Brass : C4430/KSD5301 Al-Brass : C6871/KSD5301 Al-Brass : C6872/KSD5301 Al-Brass : C6872/KSD5301
Draw a billet, a primary processed goods, to make it a circular pipe. Reconduct drawing to produce brass tubes in various shapes and sizes. Copper Alloy Tube has a fine degree of Mechano-Luminescence property and plating and drawing performances. It is lead-free and mainly utilized as a material for heat exchanger, faucet or fire extinguishing unit. Decide after checking dies production. Jointless Copper Alloy Tube C2600/KSD5301 Jointless Copper Alloy Tube C2700/KSD5301
1: Optimal Sealing by O-Ring Highly durable Teflon O-Ring was used and special coating was done at the contacting point of O-Ring to ensure perfect Sealing and secured operation at fire detecting. 2: Shock proof structure with steel ball support method With 8 steel ball support structure for shock esistance, it Is reliably safe from external impact and free from damage And leakage 3: Low Assembly Load By minimizing the assembly load with o-Ring Sealing Method, safety is secured with low pressure inside the Head. 4: Excellent Design As the head is installed in the building, aesthetic design By minimizing heat detecting with small head was made.
Dear Mr. We Bluepark Tradelink Inc, Authority official mandate from a big group company in the Russia. We can supply the Russia origin of products as below; 1. Used rail R 50~65 and HMS 1/2 (80/20%) /MOQ : 30,000/MT x 12 months 2. All kind refined OIL and GAS products as below; -D2 GAS OIL, DIESEL HSD2 GAS OIL (Automotive GAS OIL), LPG (Liquefied Petroleum GAS), LNG ((Liquefied Natural GAS, Gasoline 93/95 Octanes, CST- 180 Fuel Oil, Petroleum Coke, Aviation Kerosene Colonial Grade 54 Jet Fuel, Jet Fuel JPA1 (Aviation Kerosene Colonial Grade A1 , D6 Virgin Fuel, EN590 10PPM (Ultra Low Sulfur Diesel),Heating oil, Bitumen, Solvents.... -Payment: By irrevocable, Non- transferable, Documentary L/C at sight. -No upfront pay: any fees or any charge by seller bears all cost. -P/bond :seller's bank issues PBG 2% to buyer's bank. Only,we working for annual orders to serious buyers and their mandate,but we don't work to long chain fake agent or fake broker. If you interested, direct send us via our e-mail address for your orders of full details.
[O-RING, RUBBER SHEET GASKET] - Materials : Choose appropriate material according to NBR, HNBR, EPDM, Silicone, FPM (Viton), Kalrez, CR rubber, temp. and other working materials. - Temperature : -60°C~+300°C, It depends on the material type. (Heat-resistant) - Fluid Sealed : Choose suitable material depending on fluid or air (oil-resistance and chemical-resistance) - Pressure : For static seal, within 100bar (without Back-up Ring), above 100bar (use Back-up Ring) For dynamic seal, within 50bar (without Back-up Ring), above 50bar (use Back-up Ring) - Speed : Reciprocating - Max. 0.5 m/s. Rotary - Max. 0.5 m/s. [SPRING ENERGIZED SEAL] APPLICATION ACTUATORS, Gas turbine engine, ICE MAKERS, Plastic injection moulding machine, Spaceship, Infrared rays system, VALVES PUMPS, Medical experimental equipments, HPLC, Petro-chemical plant, FILLING MACHINE, Hydraulic and pneumatic system for air plane, METERING, Food processing line, Tooling machine, Fuel control line for air plane, Vacuum units, PRESSURE SWITCH, Infrared rays system, Extremely low temperature units and gasket
Describe the idea and what it actually does: The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact. 2. Explain in detail how the idea would be operated used The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer, 3. What features do you believe your idea has that makes it unique and appealing? The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics. 1) Number of Joints for Each Shaft - In the case where the number of joints is large, a sensation of impact is increased somewhat. - The case where the number of joints is small is appropriate for golfers with weak swings. - In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high. 2) Space between Joints - Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long. -The kick point goes down toward the tip when the space between the joints in the butt part is long. - A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased. 3) Structure of Fabric - Fabric having high elasticity and strength is used, thereby resulting in distinctive performance 4.What need does the idea fulfill? This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom. 5. Descripbe possible variations of your idea: The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
Golf shaft The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact. 2. Explain in detail how the idea would be operated used The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer, 3. What features do you believe your idea has that makes it unique and appealing? The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics. 1) Number of Joints for Each Shaft - In the case where the number of joints is large, a sensation of impact is increased somewhat. - The case where the number of joints is small is appropriate for golfers with weak swings. - In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high. 2) Space between Joints - Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long. -The kick point goes down toward the tip when the space between the joints in the butt part is long. - A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased. 3) Structure of Fabric - Fabric having high elasticity and strength is used, thereby resulting in distinctive performance 4.What need does the idea fulfill? This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom. 5. Descripbe possible variations of your idea: The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
Raw materials wire bar/rod, strip/coil, sheet/plate ,metal powder , materials: stainless, copper & copper alloy like brass, bronze, nickel silver, etc, nickel and nickel alloy, carbon and alloy steel, special metals, products for heat exchanger, pressure vessel and pipeline, products for building & architecture.
* Material: - Beryllium Copper/ Molybdenum/ Tungsten/ Nickel/ Cu-fe/ Chrome Copper/ Connector Wire, Etc - Moq: From 100kg (Depending on Stock Situation)
* Product Type - Copper Square bending pin - Yellow brass square pin/ round pin/ brass tin-coated square pin/ square bending pin - Yellow brass square stopper bending pin/ round stopper pin - Bright yellow brass square bending pin, bright tin-coated yellow brass stopper pin - Stainless steel round pin - Phosphor bronze square stopper pin/ round C-pin
* Main Material: - Naval Brass, Copper Nickel, Aluminium Bronze - Others: Stainless Steel, Carbon Steel, Nickel Silver, Cu-fe Alloy, Etc..
Beryllium Copper, Chrome Copper, Tellurium Copper
