Geotextile fabrics.
Description K680 using advanced technology, this gate opener will be automatically stop against extra resistancesand and is equiped with optional operation mode for single or dual wing to accommodate your needs. To enhance safety and convenience, there is an manual opening design so you will still be able to close the door in case of power failure. Feature Function and Advantages 1.Soft start and slow stop 2.Automatically stop against extra resistances 3.Operational operation mode for single or dual wing 4.Available for buletooth/Mobile phone app control 5.Interface for card reader and Infrared multifunction 6.Large opening angle 180 7.Back-up power supply
Original interior with differentiated exclusivity: These sheets are high gloss products for ceiling applications. These are the distinguished product that will make your place look more luxurious. The semi-transparent colour collects light, providing dimming lights that bring out cosy feelings to the atmosphere, and the non-transparent high gloss sheet in primary colours may be applied to structures to give the ceilings of any buildings and enhance the artistical points of the ceilings. Also, the product has acquired certification of fire retardant properties from the Korea Fire Industry Technology Institute, giving you the additional advantage of fire safety.
Specification Carbon 97.72%, Ash 2.28%, Bulk Density(Mg/m3) 1.555%, Apparent Porosity(%) 16.53%, Cold Crushing Strength 31.13% Size: 1mm-2mm(W)/ 0.6m-0.7m(D) Origin Made in KOREA
Angle free protractor tool can measure the angle of the inside or outside corner and transfer the angle physically onto your mister saw. The angle set on your saw will be perfectly accurate because it was directly transferred from the tool. Angle free protractor is not only helpful for measuring angles and setting mitre saws accordingly but also good for making pictures frames or decks in geometric shapes.
SH 100 is a thixotropic, fiber-reinforced, structural cement mortar for protecting and repairing concrete structures. Its physical and mechanical properties allow to correct large irregularities in the substrate with a rapid intervention. The product can be used for repairing reinforced concrete structures such as front panels of balconies, beams, columns, stringcourses, moulding, cornices and fair faced concrete surfaces. It is easily applied using a continuous plastering machine and is suitable for large surfaces such as drainage channels, dams, bridges, water pipes, tanks, containment structures made of reinforced concrete.
SH 200 is a ready-mixed, non-shrink, non-metallic, flow-able, high-strength structural grout. SH 200 contains a balanced blend of washed and graded silica sands, Portland cement, flow improving compounds, and a shrinkage compensating system which produces a volume stable structural grout. SH 200 produces high early and ultimate strengths without intermediate or latent shrinkage. SH 200 remains stable without failure from compressive loading, impact, lateral thrusts, high heat or continuous vibration. It is scientifically proportioned and is ready for use at varied consistencies from plastic to fluid.
SH 300 will form a high-strength abrasion and chemical resistant, self-leveling mortar. Because it is based on Portland cement and latex polymers, and does not depend on gypsum, it may be used indoors or outdoors. SH 300 flows out to produce a smooth resurfacing or leveling compound for structurally sound existing slabs.
SH 400 is a high-performance, fast-setting, multipurpose repair material. Durable in wet environments, SH 400 is a blend of Fast-Setting hydraulic cement and quality aggregates. SH 400 is non-metallic, and no chlorides are added. SH 400 with water to produce a workable, high quality mortar material that is ideal where fast strength gain, high durability and low shrinkage are desired. SH 400 sets in 15 minutes and achieves structural strength in 1 hour.
SH 500 is a high-performance, polymer modified, cement coating. Durable in multiple environments, SH 500 is a blend of Rapid Set hydraulic cement, high performance additives and quality aggregates. SH 500 has a working time of 30 minutes, can be exposed to hydrostatic pressure in 3-5 days, and cures to a concrete gray color.
Product : System support(Ring-lock type) Spec : Steel grade STK500, 60.5*2.6thk, Galvanized steel. System support is our flagship items since Hory has been producing it in 2010. Currently supplying it to several countries as 'Japan', 'Thailand', 'Russia', 'Cambodia', 'Vietnam', 'Philippines' as well as 'U.S.A'.
Product : Steel fowmwork. Steel formwork is our flagship items since Hory has been producing it in 2010. Currently supplying it to several countries as 'Japan', 'Thailand', 'Russia', 'Cambodia', 'Vietnam', 'Philippines' as well as 'U.S.A'.
Hory beam has 7-different types(sizes)and is useable from 1100mm~5300mm. AX 11-14 AX 14-18 AX 18-25 AX 25-32 AX 32-39 AX 39-46 AX 46-53
U-Head jack for support system(Prop) 42.7 * 600mm
PVC tarpaulin stock lot available 140 ft conatineer.
Product description This small hydraulic garbage compactor is designed for reducing trash volume by 50%-70%, which will tremendously cut transporting and storage costs. This hydraulic garbage compactor helps you easily and quickly to dispose most of garbage such as messy rubbish clothing, paper, film, cans, carton-boxes, etc., except large solid waste material like long wooden stick, steel bars, big plastic pipe, etc. This garbage compactor is popularly used in ships & marine installations, hospitals, buildings, department stores, restaurants, retail outlets, school, bowling alleys, movie theatres, or all other populated places managed by municipalities. Features: Compact and movable machine. Non corrosive. Easy and safe to operate with on/off switch and touch buttons. Hydraulically operated system. Easy to maintain and environment friendly. Sturdy and durable stainless and steel structure Specification: Dimension: (l)1000x(w)950x(h)1950mm Weight of compacted garbage: 25-35kg Compacting capacity: 100 liter Compacting time: 23 seconds. Pressing weight: 3 tons. Pressing chamber: dia.440mm x h 840mm x capacity 100 liter wrapping bag. Compactor weight: 330 kg hydraulic oil: oil 32-36, capacity 12 liter. Power; 220v single phase. Motor: 2hp
Our company was established in 2016 and has been extending our business till now. We have one factory for our products which are truss shaped SUS pier pontoon and SUS pipe bridge We have Certificate of ISO 9001:2015, ISO 14001:2015 We have Certificate of patent 10-2064123, 10-2064125 We are one of the leading companies in Korea. Truss shaped SUS pier pontoon with Joint pipe is Strong at wave force and wave rolling and high durability Outstanding buoyancy and Easy to supplement high buoyant material Anti-corrosive SUS and low defect rate Easy to install and deliver and easy to repair at the filed
Our company was established in 2016 and has been extending our business till now. We have one factory for our products which are truss shaped SUS pier pontoon and SUS pipe bridge We have Certificate of ISO 9001:2015, ISO 14001:2015 We have Certificate of patent 10-2064123, 10-2064125 We are one of the leading companies in Korea. Truss shaped SUS pier pontoon with Joint pipe is Strong at wave force and wave rolling and high durability Outstanding buoyancy and Easy to supplement high buoyant material Anti-corrosive SUS and low defect rate Easy to install and deliver and easy to repair at the filed
Intechchemical LP & Natural GAS hoses provide excellent performance of connecting gas cylinder or pipe with combustor or gas appliance for supplying gas through safely. ****USE Liquefied petroleum gas (LPG), Liquefied natural gas (LNG) For supply of butane gas & urban gas For supply of other low pressure gas
** Use -For civil engineering & subway construction -For ships and fishing industries -For suction of water pumps -For water supply and water discharge requiring internal pressure and external pressure ** Characteristics -Strong internal and external abrasion resistance -Easy installation due to excellent flexibility, and easy flow during object movement because of flatness of internal and external surfaces -Our product was produced by fusing hard material and soft material in a coil state to allow strongly enduring internal and external pressures
