Blades made from carbon fiber, molding, and the weight less than 500g.
The whole structure made of aluminum alloy except stator and rotor of motor.
Anti-vibration measures applied to the rear of windmill, runs smoothly.
Connected to the pole with clamp, simple and reliable, do not need to match the flange.
Easy installation, only one screw be used for 3 blades installation.
Packing size(mm): 1000 x 550 x 220
Sae group is solar power installers, electricians, and air conditioning and energy efficient lighting specialists. Sae group is based in brisbane and the gold coast with australia wide service.
Dimensions
9706 Solar Power Equipments Suppliers
Short on time? Let Solar Power Equipments sellers contact you.
The pv solar panels absorb the solar energy and transit the energy from sun into electricity when they are under good sunshine. Through the mppt solar charger controller, the electricity power can be stored in the battery bank. When it's day time, electricity can be converted from direct current to alternative current through the inverter for your power appliances. When it's night time, the energy stored in the battery bank can be discharged through the inverter to offer sustainable power supply.
Woke power solar off-grid solution system is greatly received by clients. They are popularly appllied to remote household families, isolated commercial buildings, frontier checkpoints, and other a/c power needs facilities.
In this solar off-grid solution system, woke power will be able to make a full solution combination on all related parts to maximiza the energy output including high efficiency pv solar panels, mppt solar charger controllers, deep cycles maintainence free batteries, off-grid pure sina wave inverters etc.
We could make oem solar off-grid power solution system as clients demand. From solar energy input to a/c power output, we will try to make a most optimized solution system for you and greatly reduce your energy concern.
Solar charger index:
Solr pannel : max power:2.2w monocrystalline
Encapsulate:glue seal
Battery: 1 pc 2400mah lithium battery
Light source: 1 pc 1200mcd led
Lighting time: continuous 120 hours when fully charged
Charging time: one day on sunny day
Input: ac5v/sun
Output: dc 5v
Outer material: abs project plastic
Circuit protection: over charged and over discharged protection
Guarantee time: 1 years
Certification: ce and rohs
Solar charger features:
1. Solar charger for equipment with 5v input such as iphone, cameral, mp3, mp4, blackberry and so on
2. Two method charging ways: by sun and by ac5v
3. Light and compass for emergency
4. Durable, 5 years lifetime, no need to change the battery
5. Super bright white led light with lifetime of approximately 100, 000 hour(continuous 120 hours if only lighting ).
Diy solar airplane model toy, green and environmental gift for kids
Solar toy index:
Solar pannel : 0.25w polycrystalline
Electric machinery: 0-500 running times per minute
Working way:work automatically under the sun
Guarantee time : 1 year
Material: abs plastic
Features:
1.Children's educational toys
2.Clean and environmental product
3.A novel design , chiristmas gift for kids
4.With a piggy bank.
2011 new design solar camping lantern for outdoor use
Solar powered camping lamp with usb charger and 32 led
(pateent lamp) 32 led lamp with ce&rohs certification(factory)
Solar lantern index:
Solr pannel : max power:2.5w polycrystalline
Encapsulate:sillicon-droping seal
Lifetime:5 years
Battery: 5 pcs aa ni-mh 1.2v/1800mah battery
Lifetime:5 years
Light source: max power:2.2w super bright led light, two opening options:50%, 100%
Lifetime:10 years
Lighting time: 4-5hours when two sides open;5-10 hours when only one side open
Charging time: 7.5 hours
Input: dc 5v/sun
Output: dc 5v
Guarantee time: 1 years
Solar lantern features:
1.Portable led light with an integrated solar pannel, easy to carry and use ;
2.Adjustable brightness to meet your lighting hours requirements
3.Lighting time can be double when only one side open .
Solar torch main index:
1. Solar pannel: : moncrystalline 0.4w glue sealed
2. Storage battery : ni-mh aaa 2pcs 500mah
3. Light source: white light 5600k, led , 4pcs
4. Outer material: abs project material
5. Lighting time: 8 hours when fully charged
6. Charging time : 5 hours on sunny days
7. Circuit proteciton: over charged and over discharged protection
Solar mini torch features:
1. Clean and energy products
2. Small and light , easy to carry
3. No need to change the battery
4. Durable , 5 years lifetime
5. High -tech products, perfect gifts for friendship.
Product description
Solar road stud can turn on automatically when it is rainy or cloudy by absorbing energy from sunlight, which can give a good guidance for drivers. Secondly it is convenient to install and make full use of natural energy.
Product feature
It can work for 8 to 12 hours after charging under sunlight everyday, even it can work for 3 to 4 days without solar energy. Under the help of it, its visual range is 500m, and the flash rate is 120 per minute or turn on all the time.
Product specification/models
1.Ni-mh storage battery is 1.2v/1300mah.
2. Its power is 0.25w made of monocrystlline or polycrystalline solar cells
3. There are 6 super bright led an each side.
4.Dimension: 102*82*23¨mm
5. It can be made of pc and aluminum.
6. There are for colors, such as yellow, red, white and blue.
Application
It is always applied in crossroads, seaside, airport, ramp entrance of railway and expressway and so on.
ModelDs-13060
Max power1w
Operating current0.2a
Operating voltage 5v
Open circuit voltage6v
Short circuit current0.225a
Battery number1
Weight for reference0.05kg
Overall dimension 130*60*3¨mm
Product certificationCe
EncapsulationEpoxy resin glue
Test condition1000w/m225am1.5
Application: this solar drop glue panel is appropriate for mobile cell phone charger, mini lounderspeaker box, box for advertisement and other small electronics.
And its longevity is 2 to 3 years, which is convenient and environmental.
Product description
Maximum power: 0.66w operating voltage: 5.5v working current: 0.12a open-circuit voltage: 6.6v
Product feature
These solar panels are encapsulated by epoxy glue and made of solar cells imported from german. They have high stability with high quality and reasonable price. They can charge mobile cell phones under the sunlight quickly, which is convenient and environmental. They are not only elegant but also practical with longevity.
Product specification/models
85*50mm
Application
Charging mobile cell phones.
Epoxy resin solar panel
BrandDesun
Model Dsm1108055250-1.375w
Dimension110*80mm
Voltage5.5v
Current 250-260ma
Feature:
1. High efficiency monocrystalline solar cells are the guarantee of stable and durable power which is up to international testing standard.
2. The transparent epoxy resin protects solar cells from damaging.
3. High conversion rate
4. Good weak light effect
5. Convenient/environmental/green/long span
Application: it has widely applied in solar garden lamp small family light fixture and all kinds of electrical equipment with low power such as mp3 mp4 remote control cell phone chargers and toys.
Our company specializes in solar modules solar panels solar light epoxy encapsulation solar panels lamination solar panel and ultrathin solar panels.
We can produce solar panel according to your requirements.
Email: sales02@desunpv.Com
My msn is zhangxiaojin162@msn.Com welcome to contact me.
1.Use free sunlight as power source;alternative power can also charger by ac.
2.Powerful 0.5w/5v solar panel give sufficient charge to the lantern.
3.One sunny day's charge can support lantern 4-6hours with brightness
4.360degree brightness with 0.5w one pcs+1.2v/350ma ni-mh recharge battery.
5.Tough and waterproof design, it's no easy to be broken.
6.Solar lantern life time is 5 years.
Electrical characteristics
Maximum power [pmax]5w5%
Maximum power voltage [vmp]18v3%
Maximum power current [imp]0.27a3%
Short-circuit current [isc]0.30a3%
Open-circuit voltage [voc]21.6v3%
Current temperature coefficient0.08%/c
Voltage temperature coefficient- 0.32%/c
Power temperature coefficient-0.38%/c
Maximum system voltage1000v
Under standard test conditions(stc): irradiance of 1000w/m2, am1.5 and 25¡æ cell temperature
Mechanical characteristics
Dimensionsº274mm(l) x 185mm(w) x18mm(h)
Weight: 0.5kg
Solar cells: polycrystalline solar cells, 36cells in 2x18matrix connected in series
Module warranty:
25-year limited warranty of 80% power output10-year limited warranty of 90% power output5-year limited warranty of materials and workmanship.
Carton/pallet
9706 Solar Power Equipments Suppliers
Short on time? Let Solar Power Equipments sellers contact you.
