Item no : BSK-150W
Maximum Power(Wp): 150W
Maximum Power Voltage(V): 34.2V
Maximum Power Current(A): 4.36A
Open Circuit Voltage(V): 43.4V
Short Circuit Current(A): 4.94A
Size of Module(mm): 1580mm X 808mm X 35mm
Size of Glass(mm): 1574mm X 802mm X 3.2mm
Size of solar cells(mm): 125mm X 125mm
Number of cells(Pcs): 72pcs
Maximum System Voltage(V): 1000V/600V
Temperature Coefficients of Isc(%): 0.06%/
Temperature Coefficients of Voc(%): 0.397%/
Temperature Coefficients of Pm(%): 0.549%/
Nominal operating cell temperature: 45.32
Temperature Range: 40- +90
Surface Maximum Load Capacity: 200kgs/m2
Allowable Hail Load: 25mm@80km/h
Weight Per Piece (kg): 15.0kgs
Frame(Material,Corners,etc): Aluminum
Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power.
Packing: 728pcs/40¡± container , 14 pallets total per container
52pcs solar module per pallet
Packing size per pallet :1.65x1.12x1.85m.
Item NO : BSK-50W
Maximum Power(Wp): 50W
Maximum Power Voltage(V): 17.5V
Maximum Power Current(A): 2.86A
Open Circuit Voltage(V): 21.6V
Short Circuit Current(A): 3.5A
Size of Module(mm): 826mm X 556mm X 35mm
Size of Module(mm): 820mm X 550mm X 3.2mm
Size of solar cells(mm): 125mm X 83mm
Number of cells(Pcs): 36pcs
Maximum System Voltage(V): 1000V
Temperature Coefficients of Isc(%): 0.058 %/
Temperature Coefficients of Voc(%): 0.367%/
Temperature Coefficients of Pm(%): 0.485%/
Nominal operating cell temperature: 44.42
Temperature Range: 40 + 90
Surface Maximum Load Capacity: 200kgs/m2
Allowable Hail Load: 25mm@80km/h
Weight Per Piece (kg): 6.0kgs
Frame(Material,Corners,etc): Aluminum
Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power.
Product Info:
Model No: SET-01
Diameter of Outer/Inner Tube: 47/37, 58/47
Length of Tube: 1500/1800, 1800
Thickness of Tube 1.60±0.15, 2.0±0.15 2.2±0.15
Technical Specifications:
Iten Specification: Three Targets (operation Temp. around 100°C)
Absorptance of Selective Coating (AM1.5): Alpha >= 92.5%
Emission of Selective Coating(80°C±5°C): sh <= 6.5%
Stagnation Parameter Y >= 240m²°C/kW
Emission of Selective Coating(80°C±5°C): sh <= 6.5%
Solar Radiance Exposure H <= 3.0MJ/m²
Average Heat Loss Coefficient ULT=0.65W/(m²•°C)
Selective Coating Material: SS-AL-N/Cu
Application field Hot water
Vacuum Quality P=3x10-3Pa
Pressure-proof: 0.6MPa
Impact Resistance Steel Ball Test: steel ball with diameter of 30mm fall on the evacuated tube vertically from 450mm height, the evacuated tube is not damaged.
Transmittance of GlassTube t=0.89 (AM1.5ISO9806-1:1994)
Material of GlassTube Borosilicate Glass 3.3
Knots of GlassTube Knots(Ø=1mm) =2 pieces in area of 10mmx10mm; Knots(Ø=, 2.5mm) = 5 pieces in the whole tube.
Specifications:
All glass evacuated tubes are the absorbing component of the solar water heater. They absorb solar energy and convert it into energy used for water heating. Each evacuated tube consists of two glass tubes which are made from extremely strong borosilicate glass. The outer tube is transparent, allowing light rays to pass through with minimal reflection. The inner tube is coated with a specially selected coating which features an excellent solar-radiation absorption rate and minimal reflection properties. The top of the two tubes are fused together and the air contained in the space between the two layers of glass is pumped out while exposing the tube to high temperatures. This "evacuation" of the gasses forms a vacuum, which is an important factor in the performance of the evacuated tubes.
Evacuated tube solar collectors still provide an excellent result on a cloudy day. This is because the tubes are able to absorb the energy from infrared rays, which can pass through clouds. Wind and low temperatures also have less effect on the function of the evacuated tubes when comparing them to the flat plate solar collectors. This comes due to the insulating properties of the vacuum.
As the key components of the solar collector, the evacuated tubes have a production that is optimized in geometry and performance.The tubes are composed of two concentric glass tubes with in each case are half spherically closed on one side and fused together on the other side.
In order to make the solar power usable, the internal glass tube is provided on its external surface with an environmentally friendly, highly selective layer and is thus designed as an absorber. This coating is thus protected within the vacuum gap. It is an aluminum nitrite sputter layer which is characterized by very low emission and very good absorption.
Application:
A. Solar cellphone charger compatible with most cellphone models
B. Solar charger for small digital electronics (PDA, MP3, CD player, digital camera etc.)
C. Solar battery charger
Specification:
a. Solar panel: 2.5w multi-crystalline silicon
b. Output: DC 5v 500mA
c. Material: ABS plastic
d. Battery Lithium battery, 1 pc 2400mAh
e. Temperature range: -40F to 176F /-40c to 80c.
Features:
a. No need to change the battery, 5 years lifetime
b. Two charging ways by sun and by AC charger
c. Charging equipment with 5V input such as Iphone, Ipad, camera, mobilephone,etc
d. Ligting and compass function for emergency.
Double load output series (SR-2L)
1. Individual control.
2. Five kinds of load working mode.
3. Adopts double MOS series circuit.
4. PWM charging mode.
5. Double digital LED display.
6. Use industry-specific chip and precision components.
Parameter:
Model: SR-L series
rated charging current: 5A ,10A ,15A ,20A
Rated discharging current: 5A ,10A ,15A ,20A
Working Voltage:12V ,24V ,12V/24V Auto
No load losses:<5mA
Charging circuit voltage drop: Less than or equal to 0.20V
Discharge circuit voltage drop: Less than or equal to 0.15V
Over voltage protection:17V,2/24V
boost charge voltage:14.6V; 2/24V (duration time: 30 minutes) used every 7 days or when the battery is over discharged
Direct charge voltage:14.4V,2/24V (duration time: 30 minutes)
Float charge voltage:13.6V,2/24V
Charge recover voltage:13.2V,2/24V
Over discharge recover voltage:12.5V,2/24V
Lower voltage indication:12.0V,2/24V
Over discharge voltage:11.1V,2/24V
Temperature compensation:-4.0mV//2V(boost voltage, direct charge, float charge and charge return voltage compensation)
Control method:PWM Smart Charging
Working temperature:From -35 to +65
Over-load and short circuit protection:1.25 rated :loads current 30sec, 1.5 rated: loads current 5sec, over load protection action. ¡Ý3 Rated: load current short circuit protection action.
Circuit protection:
Over-charge, over-discharge, short circuit and over-load protection;
All the protections are harmless to any parts and fuse of controller;
Anti- connection-reverse protection for solar battery and storage battery.
Package:1pc/box;42pcs/ctn
Size: 335*295*240mm.
9706 Solar Power Equipments Suppliers
Short on time? Let Solar Power Equipments sellers contact you.
PWM dimming series (SR-LP)
1. PWM digital dimming technology.
2. Can support 8 sessions dimming.
3. Double digital LED display and key.
4. PWM dimming indication.
5. Use combine with the constant current source.
6. The full power and half power working time can be set separately.
7. Various protections
Parameter:
Model: SR-LP series
rated charging current: 5A ,10A ,15A ,20A
Rated discharging current: 5A ,10A ,15A ,20A
Working Voltage: 12V ,24V ,12V/24V Auto
No load losses:<5mA,
Charging circuit voltage drop:Less than or equal to 0.20V
Discharge circuit voltage drop:Less than or equal to 0.15V
Over voltage protection:17V,2/24V,
boost charge voltage:14.6V; 2/24V (time of duration: 30 minutes) used every 7 days or when the battery is over discharged
Direct charge voltage:14.4V,2/24V (time of duration: 30 minutes)
Float charge voltage:13.6V,2/24V
Charge recover voltage:13.2V,2/24V
Over discharge recover voltage:12.5V,2/24V
Lower voltage indication:12.0V,2/24V
Over discharge voltage:11.1V,2/24V
Temperature compensation:-4.0mV//2V(boost voltage, direct charge, float charge and charge return voltage compensation)
Control method:PWM Smart Charging
Working temperature:From -35 to +65,
Over-load and short circuit protection:Over-load protection: when the current of controller is 1.25 times of the rated current, the controller works for 30 seconds; 1.5 times of rated current, works for 5 seconds Short circuit protection: when the current of controller is more than or equal to 3 times of rated current, the protection starts.
Circuit protection:
Over-charge, over-discharge, short circuit and over-load protection;
All the protections are harmless to any parts and fuse of controller;
Anti- connection-reverse protection for solar battery and storage battery.
1. Built-in LED constant current source.
2. With intelligent four phases PWM digital dimming.(power is 100%,75%,50%,25%)
3. IP68 waterproof degree.
4. The max output voltage is 70V, which can drive 20 LED lamps installed in series
5. Various protections.
Specification:
System voltage: 12V/24V Auto
Output current: 330mA ¨C 2310mA
No-load loss: 5mA/12V;7mA/24V
Solar input voltage: < 55V
The Max. charging current: 8A
Overvoltage protection: 17.0V; 2/24V
Equal charging voltage: 14.6V; 2/24V(25), duration:1h
Ascending charging voltage:14.4V; 2/24V(25), duration:2h
Float charging voltage: 13.8V; 2/24V (25)
Return voltage during charging:13.2V; 2/24V (25)
Return voltage for over-discharging:12.5V; 2/24V
Over-discharging voltage:11.1V; 2/24V
Temperature compensation :-4.0mv//2V;
Light-control voltage :Light-control open 5V; light-control close 6V
Efficiency of constant current:90% - 96%
Current accuracy:+/-2%
Light-control judgment time :10min
The Max. output voltage:70V
Working temperature:-40 to +70;
Protection level:IP68
Weight :160g
Dimensions ; 825820(mm)(LWH).
Single-output series (SR-L)
1. PWM charging mode.
2. Five load working mode.
3. Digital LED display.
3. Over charging protection, over discharging protection, over load, short circuit protection, reverse polarity protection and TVS lightning protection.
5. Temperature compensation function.
Parameter:
Model:SR-L series
rated charging current: 5A 10A 15A 20A 30A 40A
Rated discharging current: 5A 10A 15A 20A 30A 40A
Working Voltage:12V , 24V , 12V/24V Auto
No load losses: <5mA,
Charging circuit voltage drop: Less than or equal to 0.20V
Discharge circuit voltage drop: Less than or equal to 0.15V
Over voltage protection: 17V,2/24V,
boost charge voltage:14.6V; 2/24V (duration time: 30 minutes) used every 7 days or when the battery is over discharged
Direct charge voltage:14.4V,2/24V (duration time: 30 minutes)
Float charge voltage:13.6V,2/24V
Charge recover voltage:13.2V,2/24V
Over discharge recover voltage:12.5V,2/24V
Lower voltage indication:12.0V,2/24V
Over discharge voltage:11.1V,2/24V
Temperature compensation:-4.0mV//2V(boost voltage, direct charge, float charge and charge return voltage compensation)
Control method:PWM Smart Charging
Working temperature:From -35 to +65,
Over-load and short circuit protection:1.25 rated :loads current 30sec, 1.5 rated: loads current 5sec, over load protection action. 3 Rated: load current short circuit protection action.
Circuit protection:
Over-charge, over-discharge, short circuit and over-load protection;
All the protections are harmless to any parts and fuse of controller;
Anti- connection-reverse protection for solar battery and storage battery.
Dual load output and double timeframe series
(SR-2LT)
1. Various choices for storage battery.
2. Dual time period function.
3. Various choices for the data of controller.
4. Automatically recognize the period of night to keep the lighting time accurate.
Parameter:
Model: SR-2LT series
rated charging current: 5A ,10A ,15A ,20A
Rated discharging current: 5A ,10A ,15A ,20A
Working Voltage: 12V ,24V ,12V/24V Auto
No load losses: <5mA
Charging circuit voltage drop: Less than or equal to 0.20V
Discharge circuit voltage drop: Less than or equal to 0.15V
Temperature compensation: -4.0mV//2V(boost voltage, direct charge, float charge and charge return voltage compensation)
Control method: PWM Smart Charging
Working temperature:From -35 to +65
Over-load and short circuit protection: Over-load protection: when the current of controller is 1.25 times of the rated current, the controller works for 30 seconds; 1.5 times of rated current, works for 5 seconds Short circuit protection: when the current of controller is more than or equal to 3 times of rated current, the protection starts.
Circuit protection:
Over-charge, over-discharge, short circuit and over-load protection;
All the protections are harmless to any parts and fuse of controller;
Anti- connection-reverse protection for solar battery and storage battery.
As the only manufacturer for the BP solar in China, our factory has 12 production lines and we can offer 300MW per year. And we will be much honor to become your stable supplier.
We offer a wide range of modules of high quality at unbeatable price, and the products can meet the requirement of IEC61215,IEC61730 and have acquired UL,TUV,VDE,ETL,FM,KEMCO,BBA,CE and GD Golden Sun certification.
Besides, We also provide related services on research, consultancy, software development, design, supply, project management, installation, maintenance and commissioning which applied to off-grid and on-grid PV projects (including BIPV system).
High-efficiency photovoltaic module using silicon nitride Mono crystalline silicon cells
Performance BP 485 BP 480 BP 475
Rated power (Pmax) 85W 80W 75W
Module tolerance 3%
Nominal voltage 12V
Warranty 25years
Qualification test parameters
Temperature cycling range: -40¡ãC to +85¡ãC (-40¡ãF to 185¡ãF)
Damp heat test: 85¡ãC, 85% relative humidity
Front and rear static load test (e.g.: wind): 2,400 Pa (50psf)
Front load test (e.g.: snow): 5,400 Pa (113psf)
Hailstone impact test: 25mm ? (1 inch) at 23m/s (52mph)
Typical electrical characteristics BP485 BP480 BP475
Rated power (Pmax) 85W 80W 75W
Voltage at Pmax (Vmp) 17.8V 17.2V 17.4V
Current at Pmax (Imp) 4.78A 4.7A 4.3A
Short circuit current (Isc) 5.1A 5.1A 4.7A
Open circuit voltage (Voc) 22.2V 22.0V 21.8V
Temperature coefficient of Isc: (0.0650.015)%/ ¡ãC
Temperature coefficient of Voc: - (8010) mV/¡ãC
Temperature coefficient of Pmax: - (0.50.05)%/ ¡ãC
NOCT: 472¡ãC (Air 20¡ãC; Sun 0.8kW/m2; wind 1m/s)
Maximum series fuse rating: 15A (S); 20A (J)
Maximum system voltage: 600V (US NEC rating);1000V (T¨¹V Rheinland rating);1000V (IEC 61215 rating).
Performance TBEA4300
Rated power (Pmax) 300W
Module tolerance ¡À3%
Nominal voltage 24V
Warranty 25years
Qualification test parameters
Temperature cycling range: -40¡ãC to +85¡ãC (-40¡ãF to 185¡ãF)
Damp heat test: 85¡ãC, 85% relative humidity
Front and rear static load test (e.g.: wind): 2,400 Pa (50psf)
Front load test (e.g.: snow): 5,400 Pa (113psf)
Hailstone impact test: 25mm ? (1 inch) at 23m/s (52mph)
Typical electrical characteristics TBEA4300
Rated power (Pmax) 300W
Voltage at Pmax (Vmp) 36.4V
Current at Pmax (Imp) 8.3A
Short circuit current (Isc) 8.7A
Open circuit voltage (Voc) 44.8V
Temperature coefficient of Isc: (0.065¡À0.015)%/ ¡ãC
Temperature coefficient of Voc: - (0.36¡À0.05) %/¡ãC
Temperature coefficient of Pmax: - (0.5¡À0.05)%/ ¡ãC
NOCT: 47¡À2¡ãC (Air 20¡ãC; Sun 0.8kW/m2; wind 1m/s)
Maximum series fuse rating: 15A
Maximum system voltage: 600V (US UL rating);1000V (T¨¹V SUD rating);1000V (IEC 61215 rating).
As the only manufacturer for the BP solar in China, our factory has 12 production lines and we can offer 300MW per year. And we will be much honor to become your stable supplier.
We offer a wide range of modules of high quality at unbeatable price, and the products can meet the requirement of IEC61215,IEC61730 and have acquired UL,TUV,VDE,ETL,FM,KEMCO,BBA,CE and GD Golden Sun certification.
Besides, We also provide related services on research, consultancy, software development, design, supply, project management, installation, maintenance and commissioning which applied to off-grid and on-grid PV projects (including BIPV system).
Performance BP 3175 BP 3170 BP 3165
Rated power (Pmax) 175W 170W 165W
Module tolerance +5/-3%
Nominal voltage 24V
Limited Warranty 25years
Qualification test parameters
Temperature cycling range :-40¡ãC to +85¡ãC (-40¡ãF to 185¡ãF)
Damp heat test :85¡ãC, 85% relative humidity
Front and rear static load test (e.g.: wind):2,400 Pa (50psf)
Front load test (e.g.: snow): 5,400 Pa (113psf)
Hailstone impact test: 25mm ? (1 inch) at 23m/s (52mph)
Typical electrical characteristics BP3155 BP3160 BP3165 BP3170 BP3175
Rated power (Pmax) 155W 160W 165W 170W 175W
Voltage at Pmax (Vmp) 34.9V 35.1V 35.2V 35.9V 36V
Current at Pmax (Imp) 4.5A 4.6A 4.7A 4.8A 4.9A
Short circuit current (Isc) 4.8A 4.8A 5.1A 5.2A 5.3A
Open circuit voltage (Voc) 43.9V 44.2V 44.2V 44.2V 44.2V
Temperature coefficient of Isc :(0.065¡À0.015)%/ ¡ãC
Temperature coefficient of Voc :- (160¡À20) mV/¡ãC
Temperature coefficient of Pmax :- (0.5¡À0.05)%/ ¡ãC
NOCT : 47¡À2¡ãC (Air 20¡ãC; Sun 0.8kW/m2; wind 1m/s)
Maximum series fuse rating: 15A (S); 20A (J)
Maximum system voltage:600V (US NEC rating);1000V (T¨¹V Rheinland rating);1000V (IEC 61215 rating)ng).
Model No: HRS-5001
Product Description: Solar street Light
Unit Price FOB: USD 635dollar
Minimum Order Quantity 2000PCS
Solar panel :
1.Material: Polycrystal/monocrystalline silicon
2.Specification : 1.Cell/Monocrystalline silicon solar cells 125*125mm
2. No of cells and connections / 36(4*9)
3. Dimension of module(mm)/1200*535*35
3.Weight: About 7.5kg
4.Power: 80W
5.Lifetime: 20 years
6.Current: 0.04A
7.Voltage: 4V
Battery :
1.Material: Ni-Cd
2.Capacity: 112V/100ah
3.Life time: 5-8 years
4.Features: Fully-sealed and maintenance-free
lifetime is up to 5 years
Applicable temperature: +70- -50
Cell packing and cover adopt ABS, Strengthen resistance fuel(V0 grade) is available to be chosen by user. Low discharge
Rubber material adopts special colloid plate and partitions.
Controller:
1.Lifetime: 5 years
2.12V/10A
3.Features:
Adopting wind generator or solar panel generating energy to make battery constant voltage , control current and charge automatically. It will be at the state of protection according to the checked voltage of the battery. It will protect automatically when the current is high supplied by battery, which make your battery at the best state of charging and protection and is good to Charging saturation. Property is good, visual display, easy to operate.
Remark:
1. LED lamp:lifetime is over40000hours, 112V/30W,3600lm
2. Solar panel holder,battery box::liftime is 10years, All steal galvanization spraying-plastic
3. Accessory:cable lines, fastener, terminal
4. The distance between the lights should not be 35m according to the lumen
Typically for large-scale photovoltaic off-grid power systems, the specially designed high power photovoltaic intelligent controllers, multi-channel input array of PV modules, convergence to one output. For the battery charge and discharge management, according to the battery pack voltage changes, it automatically controlling components and modules connect or disconnect to maximize the use of solar energy, and also avoids battery overcharge or over discharge problem.
In addition, through the power controller multi-input, multi-chip components can be simply connected the controller to solve the traditional large-scale systems require multiple small controllers, complex parallel wiring, to avoid errors caused by lining issues.
According to off-grid photovoltaic power system and the different battery design, solar controller are divided into 24V, 48V, 96V, 120V, 192V and 240V and other specifications to meet different users' needs or program designer
Cell Characteristics:
1. High efficiency solar cells with isotropy etched surface
2. Low reverse current, high shunting resistance and dependability
3. Proper handling from incoming inspection through production
4.100% checked for reverse current and visual appearance
5. Small light-induced degradation
6. Calibration by Fraunhofer ISE.
We manufacture and export solar water heaters (160l-300l) as common solar water heater, whole-day intelligent solar water heater, however, you may get their details (pictures, specification, fuction, packing sizes, and others). Your users don't pay any money when they use them after they bought, except for cold winter when they should use electric heater by electric power which you may pay the money for power only!
In carton.
9706 Solar Power Equipments Suppliers
Short on time? Let Solar Power Equipments sellers contact you.
