Solar Controller STIP-602 Series
Provides longer battery life and improved system performance. Sets new standards for reliability and self-diagostics
STIP - 602 Rating.
Rated Voltage: 12/24 Volt or 24/48 Volt auto work
Rated Current: 30,40,50 or 60 Amps.
Equalisation voltage 14.8Volt
High voltage disconnect (HVD): 14.4Volt
Float voltage: 13.6Volt
Low voltage disconnect (LVD) 11.1Volt
Low voltage reconnect (LVR): 12.6Volt
self-consumption: 40mA maximum
Temperature compensation: -30mV/`C/12V
Terminals: for wire sizes to 16mm
Temperature: -35`C to +44`C .
* Microprocessor Which is made in USA
* PWM or ON/OFF series battery charging options
* State of charge (SOC) battery regulation
* Battery Ah setting, boost, equalising, float charging
* Automatic load reconnection,
* LCD display: SOC as a fuel gauge, all system parameters in
digital value, system status as symbols
* Remote temperature sensor (option).
Solar EVA encapsulant is made by ethylene vinyl acetate (EVA) , eva encapsulant 2008B especially for crystal and polycrystalline silicon module encapsulation, after cured, it is characterized with high adhesion, excellent weather and uv resistance, good insulation, low shrinkage, high optical transmission.
V-gool EVA Encapsulant outstanding property:
1. Damp and heating Test (8585RH ) continuously 1000 hours, and temperature cycles test (-40-85)___IEC61215
2. Excellent adhesive strength with glass and TPT 60N/cm
3. Light transmission > 91%
4. Cross-linking rate is ranged from 80-85%.
Solar EVA encapsulant is made by ethylene vinyl acetate (EVA), EVA encapsulant 2008a especially for thin film module encapsulation, after cured, it is characterized with high adhesion, excellent weather and UV resistance, good insulation, low shrinkage, high optical transmission.
V-gool EVA Encapsulant outstanding property:
1. Damp and heating Test (8585RH ) continuously 1000 hours, and temperature cycles test (-40-85)___IEC61730
2. Excellent adhesive strength with glass and TPT £¾80N/cm, suitable for double glass structure, no bubbles and Delamination.
3. Light transmission > 91%
4. Cross-linking rate is ranged from 80-90%.
Solar EVA encapsulant is made by ethylene vinyl acetate (EVA) , EVA encapsulant 2009 especially for C-SI module encapsulation , after cured , it is characterized with high adhesion , excellent weather and uv resistance, good insulation , low shrinkage , high optical transmission.
V-gool EVA Encapsulant outstanding property:
1. Damp and heating Test (8585RH ) continuously 1000 hours, and temperature cycles test (-40-85)___IEC61215
2. Excellent adhesive strength with glass and TPT £¾80N/cm.
3. Light transmission up to 92%
4. Cross-linking rate is ranged from 80-90%.
Carton with pallets.
9705 Solar Power Equipments Suppliers
Short on time? Let Solar Power Equipments sellers contact you.
180W mono solar panel specification:
Mono-Crystalline
Module type Pm(W) Number of cell Max System Voltage(V) Vm(V) Im(A) Voc(V) Isc(A)
TS-S180M 180W 72 1000 36.5 4.87 44.2 5.28
Maximum system voltage (V) 1000
Temperature coefficients of Isc (%) +0.1%/
Temperature coefficients of Voc (%) -0.38%/
Temperature coefficients of Pm (%) -0.47%/
Temperature coefficients of Im (%) +0.1%/
Temperature coefficients of Vm (%) -0.38%/
Temperature Range -40 ---85
Tolerance Wattage (e.g. +/-5%) 3%
Surface Maximum Load Capacity 60m/s (200kg/sq.m)
Junction Box Type PPO, black
Connectors and Cables Type 4mm2
Length of Cables (mm) 900
Cell Efficiency (%) 17%
Output tolerance (%) 3%
Frame (Material, Corners, etc.) Anodized Aluminum Alloy
Standard Test Conditions AM1.5 1000W/m2 25
Guarantee of power 5 years for the whole product, 90% power for 10years, 80% power for 25 years.
FF (%) 73.3%
180W mono solar panel specification:
Mono-Crystalline
Module type Pm(W) Number of cell Max System Voltage(V) Vm(V) Im(A) Voc(V) Isc(A)
TS-S180M 180W 72 1000 36.5 4.87 44.2 5.28
Maximum system voltage (V) 1000
Temperature coefficients of Isc (%) +0.1%/
Temperature coefficients of Voc (%) -0.38%/
Temperature coefficients of Pm (%) -0.47%/
Temperature coefficients of Im (%) +0.1%/
Temperature coefficients of Vm (%) -0.38%/
Temperature Range -40 ---85
Tolerance Wattage (e.g. +/-5%) 3%
Surface Maximum Load Capacity 60m/s (200kg/sq.m)
Junction Box Type PPO, black
Connectors and Cables Type 4mm2
Length of Cables (mm) 900
Cell Efficiency (%) 17%
Output tolerance (%) 3%
Frame (Material, Corners, etc.) Anodized Aluminum Alloy
Standard Test Conditions AM1.5 1000W/m2 25
Guarantee of power 5 years for the whole product, 90% power for 10years, 80% power for 25 years.
FF (%) 73.3%
230W poly solar panel specification:
Module type Pm(W) Number of cell Max System Voltage(V) Vm(V) Im(A) Voc(V) Isc(A)
TS-S230P 230W 60 1000 30.2 7.56 36.7 8.18
Parameter:
Maximum system voltage (V) 1000
Temperature coefficients of Isc (%) +0.1%/
Temperature coefficients of Voc (%) -0.38%/
Temperature coefficients of Pm (%) -0.47%/
Temperature coefficients of Im (%) +0.1%/
Temperature coefficients of Vm (%) -0.38%/
Temperature Range -40 ---85
Tolerance Wattage (e.g. +/-5%) 3%
Surface Maximum Load Capacity 60m/s (200kg/sq.m)
Junction Box Type PPO, black
Connectors and Cables Type 4mm2
Length of Cables (mm) 900
Cell Efficiency (%) 16%
Output tolerance (%) 3%
Frame (Material, Corners, etc.)
Anodized Aluminum Alloy
Standard Test Conditions AM1.5 1000W/m2 25
Guarantee of power 5 years for the whole product, 90% power for 10years, 80% power for 25 years.
FF (%) 73.3%
Solar modules is well designed with good quality and high efficiency.We adopt 17-18% efficiency crystalline solar cell.We offter any size solar modules according with customer requirement. It is your best choice for telecommunications, traffic sign etc.
The tubes are made from low emissivity borosilicate glass (glass with a very low iron content that has superior durability and heat resistance ) with an all-glass seal and they employ AL/N on AL selective coating, which enables the use of the whole solar energy spectrum to generate heat; this produces greater thermal efficiency in bright sunshine but also produces high efficiency in overcast or diffuse sunlight conditions. Further, the tubes are evacuated and have a barium getter (vacuum indicator) which changes color from silver to white if a tubes vacuum has been compromised.
An examination of the tubes shows that the outside is actually 2 layers of glass and a vacuum has been created between them. A good way to demonstrate this would be to fill an empty tube with very hot water and notice that it does not even get warm as you hold the tube in your hands. That is because of the thermos effect¡± created by having a vacuum between the layers of glass.
Type Multi crystalline silicon wafer ( B grade)
Size(mm) 156.6 (+0.0 to -0.5).
P/N type P
Do pant Boron
Resistivity(ohmcm) 0.5 û 5.0
Carbon Content 5.0x1017 atoms per cm3
Oxygen Content 3.0x1017 atoms per cm3
Life Time > 1.5 microsecond.
T T V less than or equal 50 microm.
Thickness 200 microm(+/- 30 microm)
Production(Casting) method EMC
Diffusion length greater than or equal to 50 micrometer
Conner angle(degree) 90.0 +/- 0.3
Beveled edge width 0.5 - 2 mm
Appearance Chip ( Width 0.8 mm, less than or equal 4 points.
Micromorph Solar Modules-besides an amorphous silicon layer, the micromorph cell has a tandem structure with a additional microcrystalline bottom cell which can absorb red and near infrared spectrum, allowing an efficiency increase by approximately 30%, Achieving the breakthrough of conversion efficiency more than 9%.
Item NO : BSK-100P
Maximum Power(Wp): 100W
Maximum Power Voltage(V): 17.635V
Maximum Power Current(A): 5.672A
Open Circuit Voltage(V): 21.88V
Short Circuit Current(A): 6.22A
Size of Module(mm): 1154mm X 676mm X 35mm
Size of Glass(mm): 1148mm X 670mm X 3.2mm
Size of solar cells(mm): 156mm X 120mm
Number of cells(Pcs): 36pcs
Maximum System Voltage(V): 1000V/600V
Temperature Coefficients of Isc(%): 0.06 %/
Temperature Coefficients of Voc(%): 0.397%/
Temperature Coefficients of Pm(%): 0.549%/
Nominal operating cell temperature: 44.42
Temperature Range: 40- +90
Surface Maximum Load Capacity: 200kgs/m2
Allowable Hail Load: 25mm@80km/h
Weight Per Piece (kg): 11.0kgs
Frame(Material,Corners,etc): Aluminum
Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power.
Item no : BSK-120P
Maximum Power(Wp): 120W
Maximum Power Voltage(V): 17.4V
Maximum Power Current(A): 6.89A
Open Circuit Voltage(V): 21.75V
Short Circuit Current(A): 7.63A
Size of Module(mm): 1482mm X 676mm X 34mm
Size of Glass(mm): 1476mm X 670mm X 3.2mm
Size of solar cells(mm): 156mm X 156mm
Number of cells(Pcs): 36pcs
Maximum System Voltage(V): 1000V/600V
Temperature Coefficients of Isc(%): 0.065 %/
Temperature Coefficients of Voc(%): 0.346%/
Temperature Coefficients of Pm(%): 0.488%/
Nominal operating cell temperature: 45.32
Temperature Range: 40- +90
Surface Maximum Load Capacity: 200kgs/m2
Allowable Hail Load: 25mm@80km/h
Weight Per Piece (kg): 12.5kgs
Frame(Material,Corners,etc): Aluminum
Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power.
Item NO : BSK-80W
Maximum Power(Wp): 80W
Maximum Power Voltage(V): 17.5V
Maximum Power Current(A): 4.57A
Open Circuit Voltage(V): 21.6V
Short Circuit Current(A): 4.81A
Size of Module(mm): 1196mm X 556mm X 35mm
Size of Glass(mm): 1190mm X 550mm X 3.2mm
Size of solar cells(mm): 125mm X 125mm
Number of cells(Pcs): 36pcs
Maximum System Voltage(V): 1000V
Temperature Coefficients of Isc(%): 0.06 %/
Temperature Coefficients of Voc(%): 0.397%/
Temperature Coefficients of Pm(%): 0.549%/
Nominal operating cell temperature: 44.42
Temperature Range: 40- +90
Surface Maximum Load Capacity: 200kgs/m2
Allowable Hail Load: 25mm@80km/h
Weight Per Piece (kg): 8.5kgs
Frame(Material,Corners,etc): Aluminum
Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power.
10pcs per carton and with pallet finally.
9705 Solar Power Equipments Suppliers
Short on time? Let Solar Power Equipments sellers contact you.
