Production Introduce The bloom transfer car is a kind of electric flat car, it also called electric transfer car, motorized transfer car, rail transfer car, etc. This kinds transfer car mainly powered by battery, the transfer car powered by other powered supply mode also can be customized as per demands. Advantages Safe and environment friendly Big starting power Small impact to the gear reducer No restriction of the running distance Can running on s-shape rail, arc-shape rails Has no limit on working distance Anti-explosion,Anti-high temperature Stable start, big starting power, long lifetime
Product Introduction - Coil Handling Transfer Cart The coil handling transfer cart is designed for roll material handling. The coil handling transfer cart is powered by battery. Certainly, the coil handling transfer cart can be powered by other power supply mode, such as low voltage rail, cable drum, towed cable. There are mounted V-shape and roller on coil handling transfer cart to protect the coil from falling down from the coil handling transfer cart. The V-shape supporting can be designed according to coil diameter, and roller distance can be adjusted as per coil diameter. V-shape supporting and roller can be removable from the coil handling transfer cart. We can design coil handling transfer cart according to the workshop application, material dimension. It can be applied in all kinds of occasion even severe working environment. Performance Character - Coil Handling Transfer Cart 1. Convenient maintenance: Lubricate some joint active parts, such as wheels, bearings, etc. Others mainly focus on inspection and cleaning. 2. Shorter shutdown maintenance time: Convenient and quick, short downtime, low maintenance costs. 3. Environmental impact equal to zero: low noise, no emissions. 4. The control performance is better: The operation control is simple and convenient, and it is flexible, which greatly reduces the labor intensity of the operator, and it is very helpful for improving the working efficiency and the accuracy of the work. 5. Long service life of battery: The service life of the battery is 1500 charge and discharge cycles, and the working hours are about 12000 hours. Custom Options - Coil Handling Transfer Cart Flat decks or fixtures customized for specific loads. Custom deck configurations including built-in scales and lift/tilt/rotate capabilities. Track or trackless, non-guided steering. Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels. Fixed or variable speeds with forward/reverse function. Drives with acceleration/deceleration capabilities. Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation. Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems.
Brief introduction for steel coil transfer car The steel coil transfer car can be powered by battery, low voltage rail, cable drum, trailing cable. There are mounted V-shape and roller on steel coil transfer car to protect the coil from falling down from the steel coil transfer car. The V-shape supporting can be designed according to coil diameter, and roller distance can be adjusted as per coil diameter. V-shape supporting and roller can be removable from the steel coil transfer car. We can design steel coil transfer car according to the workshop application, material dimension. It can be applied in all kinds of occasion even severe working environment. Features of steel coil transfer car With lifting holes, steel coil transfer car is convenient to shipment; The steel coil transfer car has a feature of stable start, big starting power, long lifetime; The steel coil transfer car can run on the C-form track or S-form track and L-form track; Safe and convenient operation is available for this steel coil transfer car; High using frequency for steel coil transfer car.
Products Introduce About the battery powered material handling trolley, the battery is installed inside of trolley body. The battery supply electricity to the DC motor through the electrical control system. We use this principle to make the material handling trolley start, stop, turn left, turn right, go forward and backward, and so on. Application Die handling; Portable machine base; Assembly mount; Metal coil transporter; Heavy equipment transporter with lift deck; Structural steel transporter; Shuttle cart for pipe; Pre-cast concrete production trolleys; Portable base for jib arm with spreader beam.
Brief Introduction for material transfer rail vehicle The material transfer rail vehicle, it is a rail vehicle powered by towing cable which is laid on the ground. The cable line is placed between the two rails or onside. The operation system is low voltage 36V power. It has widely applied in the industry transportation field all over the world. Our material transfer rail vehicle is available in a number of configurations specifically designed to suit the needs of our customers. Working Principle of material transfer rail vehicle When the material transfer rail vehicle moves, the cable pulls behind the vehicle.The cable is connected to the ground at one end, while the other is powered by an electric control box on material transfer rail vehicle, and then provide the power to the engine. The material transfer rail vehicle conduct AC 380V directly into the electrical control system of the material transfer rail vehicle to let it start, stop, go forward and backward,etc. The material transfer rail vehicle can be customized by your true situation, the proper solution will be recommended to you after knowing your plant, hope rich experience can help you well.
Brief Introduction for industry rail transfer vehicle Industry rail transfer vehicle, simply speaking, it is a electric flat vehicle running on the rails. Due to its power supply, it get rid of the limitation of cable, and has no strict requirement for the rails. The kinds of industry rail transfer vehicle can be operated via remote control, which makes it more convenient and safer. Whatâ??s more, due to this power, it can run without limited distance as long as charged fully! Design Concepts of industry rail transfer vehicle In order to meet industrial transport demand, we design the kinds of industry rail transfer vehicle, which makes the transporting more convenient and realized turning easily. Whatâ??s more, the safe protection has been done in many points, which not only promote safety factor but also get good assessment from our client all over the world. Application of industry rail transfer vehicle Its application range includes: mould field, car field, steel, iron, heavy industry, light industry, chemical, mine, ship, project, spaceflight, coal, nuclear energy, hydraulic engineering,etc.
Product Description About the electric transfer rail cart, the AC 380V cable relies on the retractable cable of the reeling device to realize supply electricity for electric transfer rail cart. The reeling device is placed under the electric transfer rail cart, and the power is directly controlled by the AC control system to start, stop and so on. The operating system is a low-voltage 36V power supply control. To avoid damage to the cable, add a cable reel as a retracting/discharging device. Due to the limitation of the cable, it is suitable for a short-distance rail transportation system, but its structure is simple and the price is low. Features Metallurgical Motor - Y series metallurgical motor is suitable for frequent starting. Cable reel - With a large adjustment range for take-up torque, constant tension after adjustment and stability, good synchronization performance. Self-locking ability, no cable slipping - Reasonable structure arrangement, easy installation, use, maintenance, stable and reliable performance. Application The electric transfer rail carts are widely applied in many fields, such as automotive, steel, heavy industry, engineering, aerospace, coal, nuclear energy, water wheel manufacturing, paper industry, ceramics workshop, metallurgy heavy industry, slab transfer workshop, coal electrical and mechanical industry, unfired brick transshipment industry, etc. Company Information Xinxiang New Leader Machinery Manufacturing Co., Ltd is devoted to manufacture and sell lifting and handling equipment. We can produce 1-500 ton range of various tonnage of KPD rail low voltage series, KPJ cable reel series, KPC safety sliding line series, KPX battery powered series, BWP rubber wheel transfer cart series, KPT towed cable series, KP non-power type seven series which including turning electric flat car, trackless electric flat car, ladle car, ferry electric flat car, hydraulic lifting electric transfer car, electric winch, rail wheel and so on more than 90 products.
Product Description The robot rail transfer cart is a kind of electric transfer cart that combine with industrial intellagent robot working in workshop. It running on rails and powered by towed cable. Product Details Load Capacity: 2.5 Ton Power Supply: Towed Cable Color: Yellow Control Method: Remote Control Size: 1500*1500*400mm All Can Be Customized As Per Demands.
Product Introduction The die transport vehicle is designed for die or mold handling. The die transfer vehicle is powered by low voltage railways. The capacity load of the die transport vehicle can reach 500 tons. Depending on the size of the die or mold, you can choose the size and load capacity of the die transport vehicle. Working Principle The power source AC 380v is transformed into AC 36v two-phase and are respectively connected to the two rails. Then the die transport vehicle's wheels conduct the AC 36v on rail into the electrical appliance box at the bottom of the die transport vehicle. And then the AC 36v is transformed into DC 36v and then control the DC motor through the DC control system to make the die transport vehicle start, stop, go forward and backward and adjust the speed and so on. Performance Characters 1. High-quality reducer-gears adopt CNC grinding technology, high precision, good contact, high transmission efficiency, high bearing capacity and long service life. 2. High-quality motor - with a correspondingly fast, large starting torque, from zero speed to rated speed with rated torque performance. 3. The wheel adopts angular bearing seat for easy installation and adjustment - in order to properly improve the machining accuracy of the relevant parts to improve the accuracy of the vehicle's installation and manufacturing, to place the wheel deviation, the contact between the rim and the track intensifies the rim wear and increases the frictional resistance and so on. 4. High degree of automation - to achieve unmanned automated production processes.
Product Introduction About the rail automatic transfer cart, it is a kind of rail guided transfer cart powered by dragged cable. It equipped with PLC controller and fixed-point positioning stops, and combine with the rail clamp, so that the flat car stops more stable, slow, prevent material scattering, cooperate with the industry robot , easy to achieve automatic grasping operations, simple operation. Custom Options Flat decks or fixtures customized for specific loads. Custom deck configurations including built-in scales and lift/tilt/rotate capabilities. Track or trackless, non-guided steering.Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels. Fixed or variable speeds with forward/reverse function. Drives with acceleration/deceleration capabilities. Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation. Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems.
Brief Introduction for electric shipyard transporter Electric shipyard transporter is special for the rails with slope, it is pulled by the winch, electric shipyard transporter body is made into a ramp shape to ensure the stability of the transfer material when the electric shipyard transporter running. It is based on the degree of climbing to design the ground clearance. Its transmission power will increase with the operation of the electric shipyard transporter. It has strong climbing ability and runs smoothly. It is mainly used in shipyards. Features of electric shipyard transporter The greatest function of the electric shipyard transporter is can climbing the slope. The main power of the electric shipyard transporter is generally driven by a winch to make it forward, backward and stop. The electric shipyard transporter is suitable for small load capacity. The electric shipyard transporter operate steadily and convenient to use.
Product Introduction The coil handling cart is designed for roll material handling. The coil handling cart is powered by towed cable. There are mounted V-shape and roller on the coil handling carts to protect the coil from falling down from the coil handling cart. The V-shape supporting can be designed according to coil diameter, and roller distance can be adjusted as per coil diameter. V-shape supporting and roller can be removable from the coil handling carts. We can design coil handling cart according to the workshop application, material dimension. It can be applied in all kinds of occasion even severe working environment. Safety Device 1. Acousto-optic warning lamp (When the coil handling carts running, it will ring up to warn others.). 2. Urgent stop button (When encountering unexpected situations, pressing the emergency stop button, the coil handling carts will immediately stop to ensure safety). 3. E-stops (The induction switch equipped on the front and rear of the coil handling carts, the cart will automatically stop when induction of obstacles, to ensure safe ). 4. Collision avoidance device (to protect coil handling carts from damage). Application Coil handling; Portable machine base; Assembly mount; Metal coil transporter; Heavy equipment transporter with lift deck; Structural steel transporter; Shuttle cart for pipe; Pre-cast concrete production trolleys; Portable base for jib arm with spreader beam.
Product Introduction for automatic 360 degree turntable The automatic 360 degree turntable is powered by battery,it can turning 360-degree, which is the matching equipment for turning the flat cart. Generally, There is the rails installation on the turntable so that the flat cart can turning to the place where it needs. Of course, the turning angle can be customized. Characteristics of automatic 360 degree turntable The use of the automatic 360 degree turntable is convenient; The turning is flexible; The positioning is accurate; Stable driving; High accuracy of rail connection; Totally automatically operated; Convenient and flexible; Control panel with wire or remote control; The automatic 360 degree turntable is the best choice for the 90-degree turning in the workshop.
Product Introduction - Industry Ferry Transfer Car About the industry ferry transfer car is a rail type transportation car that lays a track on the ground, and the laid rail is generally an I-shaped surface contact rail. The industry ferry transfer car is designed for transfer car to change the rail. The performance characteristics of the industry ferry transfer car is that it has a large bearing capacity, is not afraid of dirty and squeaky, easy to maintain, and has a long service life. The industry ferry transfer car can be equipped with industrial wireless remote control devices to achieve artificial remote control. The industry ferry transfer car has a simple structure, easy using and operation. It is commonly used in construction materials, stone materials, metal processing, tunnel engineering, iron and steel metallurgy, hydropower industry, aerospace war industry, ship terminals, automobile machinery and other fields. Product Function - Industry Ferry Transfer Car 1.Load-bearing transport Load-bearing transport is the most basic and important function of industry ferry transfer car. 2. Turning This series of industry ferry transfer car have the function of running on S-shaped, C-shaped, curved rails, etc. 3. Safety devices Safety devices can be installed on the industry ferry transfer car, for example, proximity switches, dead man stop, alarm systems, buffers to achieve the corresponding safety functions. 4. Others: The company can research and develop the corresponding non-standard industry ferry transfer car to achieve the required functions according to the customers' requirements. Application - Industry Ferry Transfer Car The industry ferry transfer car have a wide application field including metallurgy industry, machinery manufacturing industry, steel mill, mine industry, power industry, mold industry, automobile assembly industry, shipyard industry etc.
Product Description About the aluminium coil transfer cart, literally speak, it is an electric transfer cart without rails, which is the special type compared with traditional transfer cart. More importantly, it has been new favorite in the industry transport field all over the world with hot market. Especially for the workshop that it exists unfixed running distance. The aluminium coil transfer cart is powered by battery. The battery is installed in the aluminium coil transfer cart. The batteries supplied the electricity to the DC motor through the electrical control system to control the aluminium coil transfer cart to start, stop, go forward, backward, adjust the speed and so on. Cart Frame The cart frame is two longitudinal beam, several beams with steel panel welded together, which adopts box beam structure according to the crane principle and combined with the design of the carts. Its main feather: large load bearing, little table deformation, long service lifetime. PU Wheel About the aluminium coil transfer cart's wheels, the material is PU wheels, inside is cast steel, outside is encapsulation. by the design, its main function is damping. In our aluminium coil transfer carts, this kinds are also choose. And the PU wheel are manufactured and assemblied by ourselves. Battery About the battery, the maintenance free type battery also is chosen to export. This kinds are convenient, and long lifetime, we needn't maintain once a regular time. so in this series aluminium coil transfer carts, it is popular among customers. Generally speaking, the charging time is about 8 hours. Intelligent Charger Generally speaking, the intelligent charger is chosen to export, it has high frequency, little interference to the grid, and small volume. The charger can not only realize rapid charging, but also no damage to the battery, and prolong battery lifetime.
Products Description The electric flat handling cart is a handling equipment used for material transfer along the hall. Upper platform is designed in accordance with the requirement of the material to be handled. Consists of end carriages selected appropriate for capacity and the size and the steel construction designed based on the project. Features Flat steel deck Flat tread steel wheels Drive motor Voltage meter Push button pendant Options Railings AC power Cable reel Warning alarm Wood decking material Stainless steel decking Custom paint color Rail guides End stops Each of our design can meet your specific application. Applications Material or stock shuttle Assembly transfer Tank transfer Moveable machinery platform
Products Introduction This series pallet transfer car is powered by dragging cable. It conducts AC 380v directly into the electrical control system of the pallet transfer car to let it start, stop, go forward and backward and so on. The dragging cable is laid on the ground. The cable line is place between the tow rails. The operated system is low voltage 36v power. The hydraulic lifting device can be installed on the pallet transfer car. Parts Show Three In One Reducer & AC Motor: This type gear box with advantage of high efficiency, operate steadily, easy installation and maintenance, etc; Brake is composed by brake frame, brake parts, brake operating device and so on, it is a safety device to ensure pallet transfer cart working safely; The electric motor is AC motor. Cable and Drag Chain: The cable can be installed either the center of the two rails or one side of the pallet transfer car. And in order to protect the cable in case of serious abrasion, the drag chain can be equipped to the pallet transfer car together for protection so that prolong the cables' lifetime. Electrical Control Box, Control Method and Safety Device: There are power source switch, emergency stop switch, alternation switch, indicator light, etc, which can make the operation more safety. There are handle control and remote control two methods, certaily, control panel also can be installed as your demands. Safety device: sound and light aralm, bumper device, E-stop, etc. Features This series pallet transfer cars are suitable to be used in the bed environment, for example, high-temperature and anti-explosion condition.
Product Specifications Model: BWP Control Mode: Pendant/Remote/PLC Control Power Mode: Battery or Cable or Custom Load Capacity: 1-500 Ton Color: Customzied Special Function: Anti-Explosion, Heat-Resistant, Lifting, Dumpling Feature: Easy Operated and Long Using Time Transport Package: Tarp and Polywood Case Brief Introduction The Mecanum Wheel Motorized Transport Vehicle is battery powered, driven by motor and gear reducer, the mecanum wheel can run the common ground directly, which has no limited running distance, mecanum wheel can reduce the damage of ground. 360° in-place turn for more narrow space operation, 360° no corner protection, dead man stop and so on to protect the safety. Touch screen, rocker...which make the design more humanization.
Description of wear-resisting train wheels The wear-resisting train wheel are made from high strength steel. Running surfaces are hardened to 40 HRC. The wheel runs on self aligning antifriction roller bearings and have substantial flanges on either side of the machined running face. The wheel with shaft is shrunk fit on to their respective axles, and can be easily replaced. More details of wear-resisting train wheels 1. Material: cast steel 55 or cast iron, stainless steel; 2. Constitute: two wheels, one axle, four bearings, and other parts; 3. Loading capacity: 1-300 tons, can be customized; 4. The type of the wheels: single flange wheel, double flange wheel, hollow wheel sets and solid wheel sets; 5. The diameter of the cast iron wheels : 300mm, 350mm, 400mm, 450mm;500mm; 900mm, etc.
Basic Info Model NO.: BZP Certification: CE Product Name: Car Turntable Turning angle: 360degree Control System: Push Button, Remote Control or PLC Power source: 380V, 50Hz, 3P/220V, 3P/other local power Transport Package: As Required Products Introduction Electric motorized car turntable is a kind of turntable work with electric motorized car. Working principle: when the car runs on the turntable, turn the turntable automatically or with manpower to connect the railway on the turntable with the 90° turning railway, and then the car will run on the 90 degree turning railway. This kind turntable is suitable to be used on the annular railway and crossing railway for the equipment's producing line. The turntable system has the features of stable driving, high accuracy of rail connection and can be totally automatically operated. Products Features 1. Smooth and no noise; 2. Inverter and double limit switch control mode, the track accuracy greatly improved; 3. Large tonnage rotation support to do the main body to meet the large tonnage flat car conversion needs.
