Pinewood Timber S2s, S3s, S4s; A. C, B And Also A Grade Panels (egp); Moudings, Posts, Plywood (film Faced Plywood, Plywood Resin, Anatomic Plywood, Amazonic Timber Veneer Faced Plywood); Timber Veneers (rotary And Longitudinal Sliced); Flat Jamb, Stair Parts, Fencing, Boards, Blanks, Internal And External Doors; Fire Resistant Doors; Pallet Lumber, Complete Linies Of Furniture (solid Wood, Mdf, Mdp, Pellet Fsc, En Plus A1, Eucaliptus And Its Derivates.
CE certification, EN455, EN374 - Reliable protection against hazardous substances - Soft and perfectly adhesive material made of high quality latex for medical purposes, which ensures excellent handling and sensitivity - The lined cuff ensures easy donning and prevents rolling back - The size responds to the international standard - Single use - Pack: 100 pcs 70 000 packs available All on stock in Slovakia. Sending within 24 hours.
Clinoptilolite is the new ideal filter medium for swimming pools in replacement of sand. Clinoptilolite has many advantages over sand due to its high porosity, durability and cation exchange capacity. Clinoptilolite can remove contaminants such as dissolved ammonia that sand and DE filters simply cannot handle.
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 °C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 �°C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
