Comp. Strength: 3rd dates mpa 12 min 7th dates mpa 19 min 28th dates mpa 28 min Time of setting, vicat. Initial 45 min. Ket thuc/final max.375 min Autoclave expansion max. 0.8% Sulfate content/so3 max. 3.5% Loss on ignition max. 3.0% Insoluble residue max. 0.75% Equivalent alkalies (na2o+0.658k2o) max. 0.6% Air content of mortar max. 12% Mgo max. 6.0% Bulk
Metal scrap and steel, cooking oil of various types, building material, logistics and agro products e.T.C. We deal very strongly in both ferrous and non ferrrous metals, copper wire scrap , aluminium wire scrap, aluminium ingots such as a7, a8,hms, aluminium , ubc , profiles aluminium wheels brass,hms, cast iron, pvc, big bags scrap cement. We buy and sell all these products,, tiles,ceramics, food products, powder milk.Logistics
Portland (constructional) Cement is a fine powder mixture of various minerals. It is produced by mixing calcareous minerals such as chalk, limestone containing silica and alumina and heating it to 1450 deg C when it cools a clinker is formed. This clinker is then finely ground and mixed with small quantity 3-5% of gypsum which has calcium sulphate in it. The amount of gypsum controls the physical properties of the eventual concrete. Sometimes very minute quantities of pigments are also added. Cement producing processes do however vary. TYPES OF PORTLAND CEMENT: - OPC Ordinary Portland Cement - Rapid Hardening Portland Cement - Sulphate Resisting Portland Cement - Low Heat Portland Cement - White Portland Cement PACKING: - 50 Bags (Paper or Poly bags) - 1.5 tonne bags - 2 tonne bags - Bulk/Loose
Portland (constructional) Cement is a fine powder mixture of various minerals. It is produced by mixing calcareous minerals such as chalk, limestone containing silica and alumina and heating it to 1450 deg C when it cools a clinker is formed. This clinker is then finely ground and mixed with small quantity 3-5% of gypsum which has calcium sulphate in it. The amount of gypsum controls the physical properties of the eventual concrete. Sometimes very minute quantities of pigments are also added. Cement producing processes do however vary. TYPES OF PORTLAND CEMENT: - OPC Ordinary Portland Cement - Rapid Hardening Portland Cement - Sulphate Resisting Portland Cement - Low Heat Portland Cement - White Portland Cement PACKING: - 50 Bags (Paper or Poly bags) - 1.5 tonne bags - 2 tonne bags - Bulk/Loose
Cement 42, 5.
Portland cement 32, 5 r/n, portland cement 42, 5 r/n portland cement 52, 5 r/n.
Granite, cement, steel.
Bitumen, Sulphur, Gilsonite, Asphalt, Cement, Wax, and other related products. Bitumen: Oxidized bitumen 90/15, Oxidized bitumen 75/25, Oxidized bitumen 90/40, Oxidized bitumen 85/25, Oxidized bitumen 95/25, Oxidized bitumen 115/15, Bitumen 85/100, Bitumen 80/100, Bitumen 60/70, Bitumen 40/50. Gilsonite paint, Gilsonite oil and gas, Gilsonite data sheet, Gilsonite ink, Gilsonite industrial, Gilsonite foundry, Gilsonite construction, Gilsonite asphalt, Gilsonite cementing, Gilsonite drilling fluid. Paraffin wax 0.5% oil content, paraffin wax 1-3% oil content, paraffin wax 3-5% oil content, paraffin wax 5-7% oil content, Residue wax (foots oil), Petroleum jelly cosmetic, Slack wax heavy grade 12%, Slack wax light grade 30%, Slack wax light grade 10%, Liquid paraffin (white oil) medical. PAE, TRAE, Paraffin low viscosity PRO, Paraffin high viscosity PRO, MES, DAE, Extract PRO, TDAE, Aromatic low viscosity PRO, Aromatic high Viscosity PRO..CNF, CFR and FOB.
Cement, milk powder, wheat, frozen chicken, sunflower oil.
Water treatment plant.
Licorice roots and products.
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 °C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 �°C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
Oil and gas petroleum products such as mazut, D2, D6, urea 46 and iron ore, portland cement 42.5 n/r.Export
Origin : Iran term of delivery : FOB Term Of payment : TT or LC Type : 1 and 2 and 5
Wood products
Gilsonite in oil drilling is working like lubricant and cooling agent to make easy to round the drilling rod and also getting temprature of the rod comming down.It help to protect the well and prevent damage.In the asphalt is work as like as cement and in hot season prevent momvent ,rutting and break.Gilsonite in foundry working as glue and keep the sands stable and make surface of mold smooth.Gilsonite in paint apploication working on steel and wood and the color is more shinny than other varnisher,it is protecting the surface with very high stickness.Gilsonite using in shoe was and using as shinner,protector of surface against the humidity and dust also make flexibility due solid oil contet.Gilsonite or natural asphalt in ink business use as stabilizer of ink and increase the stickness on the paper.
In cooperation with our Austrian based company we developed this fantastic herb flavor which we have implemented into the drink. With this came the Ameras which is now available. Developers background comes to long years of history manufacturing and developing mainly wine and liqueurs at local area. Ameras is suitable for pubs or bars, but its many different package design makes it also wonderful present or gift.
In cooperation with our Austrian based company we developed this fantastic herb flavor which we have implemented into the drink. With this came the Ameras which is now available. Developers background comes to long years of history manufacturing and developing mainly wine and liqueurs at local area. Ameras is suitable for pubs or bars, but its many different package design makes it also wonderful present or gift.
Pond liners, pond pumps, pond filters, water lilies, water plants, fontain pumps, uv lamps.