Used mobile phones.
Disposable single use medical face mask, 3 ply disposable surgical masks, n95 masks, n95 masks.
High quality FFP3 respirator with valve, cup shape. This product has the best EU certification and quality and meets the highest EU standards EN 149:2001 + A1:2009. CE CERTIFIED: This mask has been tested to the European FFP3 standard, evaluated and approved by an EU notified body 0370. CE marked with the EU Declaration of Conformity. In conformity with PPE Regulation (EU) 2016/425. DESIGN:The adjustability 4-point headband design make it easily adapted to most face shapes, the required tightness can also be ensured. The design of the air valve makes the breathing smoother, especially when used for a long time. Glasses friendly. Filtration efficiency 99,9% Stock in Slovakia.
nitrile gloves on stock in our warehouse , ready to collect EN, DE, FR language on box blue 100 Piece/Box Gloves are suitable for medical and nursing purposes You can also use MD FONSCARE Nitrile disposable gloves when in contact with food Nitrile gives the gloves high elasticity and resistance to mechanical damage The texture on the fingertips allows objects to be gripped without any problems MD FONSCARE Nitrile disposable gloves are suitable for work in dentistry or laboratory Their shape is universal for both the left and right hand Keep the cuff rolling out of your hands
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 °C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 �°C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
