Cao (44,22%); Mgo (3,28%); SiO2 (40,31%); AL2O3 (2,62%); Fe2O3 (0,98%); S (0,44%); MnO (0,22%); TiO2 (0,19%)
Copper Slag for Sandblasting/surface cleaning in all sizes.
Ground Granulated Blast furnace Slag conforming BS EN 15167-1 & ASTM C 989-09.
Granulated Blast Furnace Slag : Granulated blast furnace slag or gbfs is the residue of combustion in the furnace of the steel refining process. It is obtained by quenching molten iron slag from a blast furnace in water or steam, to produce a glassy, granular product that is then dried and ground into a fine powder. Ggbfs or ground granulated blast furnace slag is formed when gbfs is further processed or ground using conventional cement clinker grinding technology. Uses and benefits of GBFS/GGBFS uses : - GGBFS or GBFS is the most used raw material in cement industry to make slag cement. - Lightweight fill - Raw material for the manufacture of glass - GBFS can be used as a substitute for sand in building materials - GGBFS can be used as a replacement for portland cement
Silicomanganese Slag Felman Production generates a residual commercial by-product, silicomanganese slag, through the production of Ferro Silicomanganese (FeSiMn). The slag is an inert solid green material consisting primarily of aluminum, manganese, magnesium, silicon, and calcium oxides. Production The slag is generated during the production of ferro silicomanganese using electric arc furnaces. The molten slag is casted, cooled by spraying it with cold water, and then crushed to the desired size. Potential Uses Potential uses of the commercial by-product include re-melt/reproduction, industrial fill, road base, textiles manufacturing, etc. Chemical Composition Below please find the available metals totals for the chemicals that were detected as components of the slag material. The material is considered non-hazardous as shown by Toxicity characteristic leaching procedure testing conducted on the material. A qualified and licensed environmental laboratory is currently conducting a general assay of the material to determine the % w/w of the different chemical components. TCLP Testing of Slag Chemical Slag Leachate RCRA Hazardous Waste Limits mg/L mg/L Arsenic ND 5.0 Barium 0.85 100.0 Cadmium 0.0011 1.0 Chromium 0.02 5.0 Lead ND 5.0 Mercury ND 0.2 Selenium ND 1.0 Silver ND 5.0 Slag Available Metals Totals Chemical mg/kg Aluminum 88,900 Barium 5,590 Calcium 151,000 Iron 7,230 Magnesium 28,400 Manganese 85,000 Potassium 12,200J Physical Aspects of the Material The material is a hard solid stone that has irregular fracturing similar to chert or glass. The material is primarily green, gray, and black in color and is odorless. The bulk density of the material is approximately 635 +/- 100 kg/m3. Material Size: Generally, one-to-four-inch stone, but can be crushed and sized to the clients desired specifications.
GGBS S95 From Yingkou, Liaoning, China. FOB. 14 usd/tons. manufacturer Ansteel mill( Top 3 in China)
Crushed stone from blast-furnace and steelmaking slag for general construction works, fractions: over (from) 3 to 10 mm incl., from 10 to 20 mm incl., from 20-40 mm incl., from 40 to 70 mm incl., from 70 to 300 mm, DKPP code 08.12.13 (State Classifier of Goods and Services) We have 1000 000 Tons for export
Crushed stone from blast-furnace and steelmaking slag for general construction works, fractions: over (from) 3 to 10 mm incl., from 10 to 20 mm incl., from 20-40 mm incl., from 40 to 70 mm incl., from 70 to 300 mm, DKPP code 08.12.13 (State Classifier of Goods and Services)
Hi Dear Sir / Madam.... Have a Beautiful Day....., The Chief Import Manager Scrap Imt Dept Dear Sir / Madam....., We are Wholesales bulk Suppliers and Worldwide Exporting & Importing of the Full Cleaned - IRON SLAG GRANULES =( Iron content : 55% )  in Bulk quantity supply in monthly regular  basis  depending on buyers  your Requirements....., Our Supplying  IRON SLAG GRANULES  Origin from UAE &� Europe Countries.....,
Krishna Enterprises are produces as the crystallization have higher purity and hardness of copper slag. We are leading manufacturer of copper slag and supply our entire nation. We. Having Processing Plant in South india and North India Regions Near to Indian Ocean Ports. We are producing material based on research and sales on products in global market. These are according to the client demand. We are dealing in copper slag that is made by superior quality with required customized size. Why choose our Copper Slag? Our copper slag is environmentally friendly abrasive Our copper slag is low dusting material. Our copper slag is nontoxic abrasive. Our available Copper Slag size is: 0-3 mm as per Customers Required Our Copper Slag color: Black Quality: Our copper slag is high purity, durable, and super-fine granular. Our available packing size:25/40kg,1MT jumbo Bags or as per client's demand. Application: Copper slag mostly used in sand blasting gun Copper slag is used in the bronze welding (brass welding) of copper, cast iron, and malleableiron and for the fusion welding of materials of the same or closely similar composition Intended for use in bronze welding (brass welding), cast iron or malleable iron Old steel outdoor surface cleaning, rust removal, strengthening the like. As a wear-resistant Floor aggregate, it can be made of hard floor tiles for squares, garages and other non-slip floor. Used in counter weight sand, such as cement plants. After fine processing, it can apply to denim coating and spraying a variety of more sophisticated use. Copper slags is used for the copper and copper alloy filler rods Additional Information: Delivery Time: Depend on quantity Packaging Details: As per customer client's demand
The granulated blast-furnace slag is sand-type slag manufactured by spraying high-pressure water jets on a blast-furnace molten slag.
Ground granulated blast furnace slag (GGBS) is a by-product from the blast-furnaces used to make iron. Blast furnaces are fed with controlled mixture of iron-ore, coke and limestone, and operated at a temperature of about 1,500�°C. When iron-ore, coke and limestone melt in the blast furnace, two products are producedâ??molten iron, and molten slag. The molten slag is lighter and floats on the top of the molten iron. The molten slag comprises mostly silicates and alumina from the original iron ore, combined with some oxides from the limestone. The process of granulating the slag involves cooling of molten slag through high-pressure water jets. This rapidly quenches the slag and forms granular particles generally not bigger than 5 mm. The rapid cooling prevents the formation of larger crystals, and the resulting granular material comprises around 95% non-crystalline calcium-alumino silicates. The granulated slag is further processed by drying and then grinding in a vertical roller mill/rotating ball mill to a very fine powder, which is GGBS. Applications of GGBS Powder �· Replacement of cement for super structure Ready Mix Concrete Cement Manufacturing Precast Manufacturing Packing Details: 25 kg HDPE Bags, 50 Kg HDPE Bags, 1 ton Jumbo Bags and As per Customer's requirements
1.- PRICE: 40,00 US$ per ton 2.- PRODUCT: Electric steelmill slag (iron slag) Mining material from primary metallurgy or smelting of raw materials that are generated in electric arc furnaces. 5.-SPECIFICATIONS: Contained in the Attached Technical Sheet 6.- MONTHLY SUPPLY AMOUNT 100,000 metric tons or more monthly. (Shipment 25.000 MT) 7.- TOTAL AMOUNT OF ANNUAL SUPPLY 1,200,000 metric tons per year, at a rate of 100,000 MT per month. The selling company is capable of supplying, through a firm, definitive and direct sale, the amount of one million two hundred thousand metric tons (1,200,000 MT) per year. In the event that the buying company decides to buy a smaller volume of the product, it could do so, from a minimum of four hundred thousand MT (400,000 MT), for its withdrawal within a period of four (4) months, from the date of the respective contract, because the company has a monthly supply capacity of 200,000 tm of said product
Aluminium slug Alloy:1070/6061 Temper:HO Thickness:0.5mm-6mm Width:1.8mm-40mm Diameter:10mm-500mm
Characteristics of sintered calcium aluminate: 1) Uniform chemical composition, low melting point and fast melting speed can shorten the refining time; 2) No fluorine, no erosion of furnace lining and ladle; 3) Compact structure, no water absorption, easy storage and transportation; 4) Due to the stable phase and fast slag formation, it can reduce the dust pollution to the iron and steel plant and comprehensively stabilize the refining process; 5) It does not contain impurities such as hydrogen, nitrogen and carbon, which is conducive to improving the quality of steel. Sintered calcium aluminate (premelted aluminum calcium slag) is mainly used in LF furnace, open hearth furnace and converter ladle refining to remove impurities such as sulfur and oxygen in molten steel and reduce the content of harmful elements and impurities in steel. It is suitable for ordinary carbon steel, high carbon steel, high and low alloy steel.
Copper Slag
Characteristics of sintered calcium aluminate: 1) Uniform chemical composition, low melting point and fast melting speed can shorten the refining time; 2) No fluorine, no erosion of furnace lining and ladle; 3) Compact structure, no water absorption, easy storage and transportation; 4) Due to the stable phase and fast slag formation, it can reduce the dust pollution to the iron and steel plant and comprehensively stabilize the refining process; 5) It does not contain impurities such as hydrogen, nitrogen and carbon, which is conducive to improving the quality of steel. Sintered calcium aluminate (premelted aluminum calcium slag) is mainly used in LF furnace, open hearth furnace and converter ladle refining to remove impurities such as sulfur and oxygen in molten steel and reduce the content of harmful elements and impurities in steel. It is suitable for ordinary carbon steel, high carbon steel, high and low alloy steel.
Sintered Calcium Aluminate ( Sintered Refining Slag) is calcined in the rotary kiln with the high quality raw materials.It is a good quality refining agent.It is characterized by very strong desulfurization and deoxygenation, low melting point,high melting speed, it can shorten smelting time, reduce the energy consumption,reduce dust pollution in the steel plant,reduce the consumption of the ladle refractory materials,increase the service life of the ladle.
Slag Remover is a neutral substance that will swell or melt under the action of high temperature. After expansion, it will form hollow air holes with low specific gravity and has a certain degree of adhesion after melting, which is mainly determine the processing technology. The main components are SiO2, Al2O3, and a small amount of other alkaline oxides. Uses: Slag remover is widely used in Iron and Steel smelting casting because it is melted under high-temperature operation more than 1200 C, and has adhesiveness, so it can be effectively aggregated and adsorb slag and slag on the surface of the metal. Specifications of Slag Remover agent: 18-30 mesh, 20-40 Mesh, 50-80 mesh, etc. Product Feature: No Splash, Safe and reliable Packaging: 25kg/bag, 50kg/bag, 1000kg/bag. Lead Time: 10-15 days after receiving the customer's prepayment and original LC. Please contact us for inquiry.
As a heavy industry enterprise with considerable strength in China, QIANJIN Heavy Industry produces various slag tanks, which can be processed according to the drawings provided by customers. In addition, QIANJIN slag pot has been successfully sold to more than 50 countries and regions such as The United States, Mexico, Brazil, India, South Korea, Japan, Russia and other products industries involving cement ships through continuous improvement of process and optimization of chemical composition Forging, pressing, metallurgy, engineering machinery, bridge, water conservancy and power generation, etc., provide many varieties and specifications of high quality carbon steel alloy steel castings for the national key equipment manufacturing industry
