Bitumen Penetration Grade 80/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by ASI GLOBAL TRADE is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by ASI GLOBAL TRADE is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumens are specified by the penetration and softening point test. Designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. SPECIFICATIONS : CHARACTERISTIC TEST METHOD UNIT MIN. MAX. Specific gravity at 25°C ASTM D70 °C 1.01 1.05 Penetration at 25°C ASTM D5 mm 80 100 Softening Point ASTM D36 °C 42 52 Ductility at 25°C ASTM D113 Cm 100 - Loss on heating ASTM D6 % 0,5 Flash Point ASTM D92 °C 225 Solubility in Trychloroethyelene ASTM D2042 % 99 Performance after RTFOT Method Test to ASTN D1754: - Change in mass (m/m) ASTM2872 % - 0.5 - Retained Penetration 25°C, 100g, 5s (% of original) ASTM D5 % 50 - - Increase in softening point ASTM D36 °C - â?¤8 - Softening point after hardening ASTM D36 °C 45 - LEGAL NOTES The information, and, in particular, the recommendations relating to the application and end-use of ASI GLOBAL TRADE products, are given in good faith based on ASI GLOBAL TRADE current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with ASI GLOBL TRADE recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchant-ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. ASI GLOBAL TRADE reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Bitumen 60/70 Test method Unit Specification Specific gravity @ 25°C ASTM D70 Kg/cm3 1.01/1.06 Penetration @ 25°C ASTM D5 mm/10 60/70 Softening point °C ASTM D36 °C 49/56 Ductility @25 °C ASTM D113 cm 100 min Loss on heating(wt) % ASTM D6 wt % 0.2 max Drop in penetration after heating % ASTM D5-D6 % 20 max Flashpoint °C ASTM D92 °C 232 min Solubility in Trichloroethylene ASTM D2042 wt % 99 min Spot test A.A.S.H.O.T102 Negative
ASI GLOBAL TRADE guarantees that the Bitumen Grades supplies under its offers is produced in compliance to and is in conformity to Standard AASTHO M20-70 and ASTM D946/D946M and meets the following specification requirements.
Steel Billets, Iron Ore, Coal, Gasoil Oil, Light Cycle Oil Petcoke And Polyol Sand Or River Sand.
Automotive lubricants , engine oil, motor oil, brake fluid, gear oil, industrial lubricants , hydraulic oil, compressor oil, vacuum pump oil, lubricating greases , lithium, lithium complex, calcium sulfonate, metal processing lubricants, white oil, naphthenic oil, pvc resin, bitumen.
Jp54, d6, m100 / 75, d2, jet a1, en590, lng, lpg, etc..
Air filter media, synthetic pocket media roll, triboelectric media roll, activated carbon media roll, plastic frames for air filters.
En590 and d2 diesel gas oil.
JP 54, JET A1, D2, D6 EN 590 .
Diesel, fuel.
D2.
D2, mazut.
Commodities such as crude oil, petroleum product, lithium, copper, and cashew nuts..Consultant of bridging buyers and sellers
Biodiesel feedstock such as uco, pome, tallow, pfad, palm stearin.Manufacturer & Exporter
Shaft, alternator, generator, power generation, nanotech bio-fuel xxl.Commissioning and troubleshooting
Steam coal & lng, lco, en590 diesel, petroleum-coke, river sand, river mouth sand and silica sand.
Biochar (activated carbon), wood vinegar.
EN590.
D2 EN590 10PPM.
Petrochemical , agricultural product like wheat.Manufacturer
