This generic CR Belt Assy is suitable for Mutoh Valuejet 1624 printers. This is a high quality generic part that corresponds to Mutoh part number DG-43002. This CR Belt Assy is 475cm long and 1.5cm wide. SKU: DG-43002 Manufacturer part number: DG-43002 More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
Printing Method Printing Technology FINE: Full-Photolithography Inkjet Nozzle Engineering Maximum Resolution 2400 x 1200 dpi Ink Type Pigment-based Ink Cartridge Configuration 8 individual cartridges Number of Nozzles 1,536 nozzles x 12 channels Total: 18,432 Minimum Ink Droplet Size 4 pL Media Handling Paper Handling Front-loading roll feed (one roll, front output) Front-loading manual feed (front output) Multifunction roll system (second roll, bi-directional take-up system) Media Width 8-44" / 20.3-111.8 cm Borderless Printing Width 10" / 25.4 cm, 14" / 35.6 cm, 17" / 43.2 cm, 24" / 61 cm, 36" / 91.4 cm, 42" / 106.7 cm, 44" / 111.8 cm, B2 20.3" / 51.5 cm, A1 23.4" / 59.4 cm, A0 33.1" / 84.1 cm, B0 40.6" / 103 cm Minimum Length 8" / 20.3 cm Maximum Length Roll Paper: 59' / 18 m Cut Sheet: 63" / 160 cm Media Thickness 2.8-31.5 mil / 0.07-0.8 mm Margins Roll Paper Top: 0.12" / 3 mm Bottom: 0.12" / 3 mm Side: 0.12" / 3 mm Borderless Top: 0" / 0 mm Bottom: 0" / 0 mm Side: 0" / 0 mm Cut Sheet Top: 0.12" / 3 mm Bottom: 0.79" / 20 mm Side: 0.12" / 3 mm Maximum Roll Diameter 6.7" / 17 cm Core Sizes 2 or 3" / 5.1 or 7.6 cm Connectivity Interfaces USB 2.0 Ethernet (10/100/1000Base-T/TX) Wi-Fi (IEEE 802.11b/g/n) Direct Printing USB Wi-Fi OS Compatibility Windows 70, 8.1, 8, 7, Vista (32/64-bit) Mac OS X 10.7.5-10.11.x Memory 3 GB Hard Disk Capacity 320 GB Print Languages Swift Graphic Raster (SGRaster) Physical Control Panel 3.5" / 8.9 cm color touchscreen LCD Power Requirements 100-240 VAC Power Consumption Maximum: 107 W Standby: 1.8 W Off: 0.5 W Certifications ENERGY STAR RoHS Directive Acoustic Noise 49 dB(A) Operating Conditions Temperature: 59 to 86�°F / 15 to 30�°C Humidity: 10 to 80% Dimensions 46 x 62.7 x 38.7" / 116.8 x 159.3 x 98.3 cm with basket open Weight 267 lb / 121 kg
This printhead GEN5 (MH5420/5440) is suitable for Mimaki JFX500-2131 & UJV500-160 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M022626 replacing M013497, M016979 and M015068). The following items are expressly excluded from warranty coverage: defects in printers related, in any way, to the use of any non-original or DIGINK inks or ink cartridges and nozzle clogging defects related to misuse, abuse, accident, neglect, lack of use, or improper storage when not in use for extended periods defects related to failure to perform periodic maintenance as specified in the user documentation; operation for unintended purposes defects related to improper loading of media all other defects, failures or damage not considered manufacturing defects defects related to third-party applications, software, parts, components, or peripheral devices, including any bulk ink system. defects that are merely cosmetic in nature. Product Specifications Dimensions: 89 x 25 x 69 mm (excluding cables) Head materials: SST, Nickel alloy and Epoxy Adhesive Nozzle plate surface: Coated SST Number of nozzles: 4 x 320 nozzles Nozzle spacing: 0.1693 mm Nozzle density: up to 600 npi Piezo yype: D33 Stacked PZT Temperature control: Integrated Heater and Thermistor Operator temperature range: Up to 80�° C Native drop volume: 7 pl Drop volume range: 7 - 35 pl Drop velocity: 7 m/s Jetting frequency: Up to 60 kHZ Life: 100 billion actuations per nozzle This printhead carries a manufacturer warranty. Country of origin : Japan Compatible firmware: UJV55-320 FW Ver. 2.5 or later SIJ-320UV FX Ver. 1.90 or later SWJ-320EA FW Ver. 1.30 or later UJV500-160 FW Ver. 2.00 or later JFX500-2131 FW Ver. 3.40 or later More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
This RHOS power supply fits Mimaki JV3 / TX / JF / UJV printer. This is the original Mimaki part (number M013516 replacing E300374, E300442, E300264 and E300236). Printer compatibility Mimaki DS-1600 Mimaki DS-1800 Mimaki GP-604 Mimaki JF-1610 Mimaki JF-1631 Mimaki JFX-1615 Mimaki JFX-1615Plus Mimaki JFX-1631 Mimaki JFX-1631Plus Mimaki JV2-130 Mimaki JV2-160 Mimaki JV2-180 Mimaki JV2-90 Mimaki JV22-130 Mimaki JV22-160 Mimaki JV3-130S Mimaki JV3-130SL Mimaki JV3-130SP II Mimaki JV3-160S Mimaki JV3-160SP Mimaki JV3-250SP Mimaki JV3-75SP II Mimaki TX2-1600 Mimaki UJF-3042 Mimaki UJF-3042FX Mimaki UJF-3042HG Mimaki UJF-6042 Mimaki UJV-160 More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
This Kit F/S Printhead CE2 is suitable for Oc Arizona 550 and Fujifilm Acuity Advance HS HD3545 printers. This is the original Oc�© part (number 3010112660) - Toshiba CE4 printhead. This Kit F/S Printhead CE2 is suitable for Oc�© Arizona 550 and Fujifilm Acuity Advance HS HD3545 printers. This is the original Oc�© part (number 3010112660) - Toshiba CE4 printhead. The following items are expressly excluded from warranty coverage: - defects in printers related, in any way, to the use of any non-original or DIGINK inks or ink cartridges and nozzle clogging - defects related to misuse, abuse, accident, neglect, lack of use, or improper storage when not in use for extended periods - defects related to failure to perform periodic maintenance as specified in the user documentation; operation for unintended purposes - defects related to improper loading of media - all other defects, failures or damage not considered manufacturing defects - defects related to third-party applications, software, parts, components, or peripheral devices, including any bulk ink system. - defects that are merely cosmetic in nature. Product Specifications Technology: Multi-drop grayscale micro-piezo Grayscale levels: 16 max Active nozzles: 636 Print swathe width: 53.7 mm Nozzle pitch: 84.5 �¼m Native resolution: 300 dpi Printhead weight: 174 g Dimensions: 85 x 74 x 33 mm Drop volume: 6 - 90 pl Typical firing frequency: 2.8 - 28 kHz Ink Compatibility: oil-based pigment ink and UV curable pigment ink This printhead carries a manufacturer warranty. Printer compatibility Canon Oc�© Arizona 550 GT Canon Oc�© Arizona 550 XT Fujifilm Acuity Advance HS HD3545 Fujifilm Acuity Advance HS HD3545 X2 More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
Supplies printers and spare parts .
FARO Focus 3D S120 Features: Intuitive touchscreen display: Control all scanner functions with a touch interface for unparalleled ease of use and control Small and compact: With a size of only 9.5 x 8 x 4in and a weight of just 11lbs, the Focus3D is the smallest 3D scanner ever built Integrated color camera: Photorealistic 3D color scans due to an integrated color camera featuring an automatic 70 megapixels parallax-free color overlay High-performance battery: Integrated lithium-ion battery provides up to fve hours of battery life and can be charged during operation Data management: All data is stored on a SD card enabling easy and secure transfer to a PC. Using SCENE WebShare, images can be shared on the internet Compass: An electronic compass is now included within the unit to associate directional data to your scans and facilitate the auto-registration process Height Sensor (Altimeter): Each scan now includes height information which can be used to scan different foor levels in a building. The data can then be used to differentiate the ?oors Dual Axis Compensator: To minimize the number of targets needed, the dual axis compensator enables every scan to have integrated level information WLAN (WiFi): WLAN remote control permits you to start, stop, view or download scans at a distance FARO Focus 3D S120 Perfomance Spesification
This Assy Ink Air Harness is suitable for VUTEk PressVU 320/400 printers. This is the original VUTEk part (number AA92004). More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
Scitex XP2750 Sensor Fiber Optic AMP NPN RED LED - 25-4019 This Sensor Fiber Optic AMP NPN RED LED is suitable for HP Scitex XP2750 printers. This is the original HP part (number 25-4019). More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
This HP Scitex XP5300 Vacuum Blower is suitable for HP Scitex XP5300 printers. It has a maximum vacuum of 124 mBar, sealed pressure of 134 mBar and a maximum flow rate of 90 liters/second. This is the original HP part. This blower can also be used instead of blower, 145MMM 1200 WATT, 240V on Scitex XP5300 printers. Printer compatibility HP Scitex XP5100 (Expedio 5000) HP Scitex XP5300 (Expedio Revolution) More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
This Float Sensor (Sub Ink Tank) is suitable for Agfa :Anapurna M1600 & Anapurna Mw printers. This is the original Agfa part (number 7621399-0006). the cable is 7015mm long. Printer compatibility Agfa Anapurna M Agfa Anapurna M1600 Agfa Anapurna M2050 Agfa Anapurna M2050i Agfa Anapurna M2500 Agfa Anapurna M2500i Agfa Anapurna M4f Agfa Anapurna Mv Agfa Anapurna Mw Dilli Neo Titan UVT-1606W More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
This Assy-PCB-Data Relay W/ IC is suitable for Oc�© Arizona 250 GT & Fujifilm Acuity Advance HD2504 printers. This is the original Oc�© part (number 3010110609). SKU: 3W3010110609 Manufacturer part number: 3010110609 Printer compatibility : Fujifilm Acuity Advance HD2504 Canon Oc�© Arizona 250 GT Products specifications : Type : Other Boards More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
This Y Motor Assy (64) is suitable for Seiko Colorpainter 64S printers. This is the original Seiko part (number U000103426700 replacing number U00085456100). Printer compatibility Oki ColorPainter 100S Oki ColorPainter 64S More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
This main board IPB100 is suitable for Seiko ColorPainter 100S printers. This is the original Seiko part (number U00097340501 replacing number U000973405**). SKU: U00097340501 Manufacturer part number: U00097340501 Printer compatibility : Oki ColorPainter 100S Canon Oc�© CS6100 Products specifications : Type : Other Boards More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
The HiPer HR GNSS receiver overcomes field challenges with a unique blend of technologies. If you are under tree cover, or can't get the pole plumb, or need to range widely from your base, or you need superb accuracy, or work in wet conditions, or all of the above, youâ??ll be free to do your best work. Features include Next generation Fence Antenna for superior reception Rugged, waterproof IP67 environmental design Cellular, LongLink and Radio communications all integrated 452 Universal Tracking channels Unique 9-axis TILT compensation Internal Wi-Fi and multi-spectrum Bluetooth HiPer HR Specifications GNSS Tracking Number of Channels: 452 with patented Universal Tracking Channel Technology GPS, GLONASS, Galiileo, BeiDou, QZSS, SBAS, L-Band Satellites Tracked: All in view Update/Output rate: Up to 20 Hz Communications Radio: UHF(410-470MHz), SS (915 MHz) LongLink: Yes I/O Communications: Internal Cell modem, Wi-Fi, Bluetooth Memory/Data Storage: Up to 8 GB Power and Electrical Power: External power, 6to28VDC, 2 x Internal batteries, 3.7 V, 2900 mAh each Operation Time: Up to 9 hours with removable batteries Physical and Environmental Operating Temperature: -40�°C to 80�°C Waterproof: IP67 Drop Test: 2 meter pole-drop Weight: 1kg Accuracy Static/Fast Static:: H: 3 mm 0.4 ppm, V: 5 mm 0.5 ppm Precision Static: H: 3 mm 0.1 ppm, V: 3.5 mm 0.4 ppm RTK (L1 L2): H: 5 mm 0.5 ppm, V: 10 mm 0.8 ppm RTK, TILT Compensated:H: 1.3 mm/
GSSI StructureScan Pro sale includes: GSSI SIR 4000 control unit 1600 MHz or 2600 MHz antenna Model 615 handcart with encoder 7 meter control cable Rugged carrying case 2x batteries and charger 2 year GSSI warranty GSSI SIR 4000 control unit package includes SIR 4000 Control Unit 1600 MHz or 2600 MHz antenna Model 615 handcart with encoder 7 meter control cable 2x Lithium-ion battery, Dual-bay battery charger Rugged transit case 2 year warranty RADAN 7 Software Accessories: Palm Antenna, SIR 4000 stand, SIR 4000 carry harness 2 year GSSI warranty GSSI StructureScan Pro SIR-4000 is typically used to Scan for rebar, post-tension, conduits, and non-metallic objects, Concrete slab scanning, Locate voids, Concrete imaging, Condition assessment, Structural inspection
Superior Thermal Imaging Sharp thermal resolution at 76,800 pixels for solid accuracy from farther away MSX Enhancement Multi-Spectral Dynamic Imaging adds visible spectrum definition to IR images in real time for excellent thermal detail to help you instantly recognize the problem locations Field of View (FOV) Match Now you have the option to automatically match the visible camera field of view to the IR FOV for better documentation Compass Adds camera pointing direction to every image for additional location documentation Wi-Fi Connectivity Send images and data to smart phones and tablets (ie. iPhone�®, iPad, iPod touch , or Android) to share images and critical information quickly using FLIR Tools Mobile app Accurate Temperature Measurement Accuracy calibrated within / C or / 2% of reading High Temperature Range measuring up to 2192 F (1200 C) targeting electrical and industrial applications (T440 model) Scalable P-i-P and Fused Thermal Images Blend thermal with visible light images on-screen; includes picture-in-picture window sizing Multiple Measurements Add up to 5 box areas and 5 moveable spots using the touchscreen to gather more detailed information METERLiNK Wirelessly transmit vital diagnostic data from clamp and moisture meters directly to the camera for annotating thermal images to further support findings Annotation Add voice comments via Bluetooth headset and text notes from the touchscreen keypad; New! T440 has image sketch feature to draw circles and pointers on IR/Visual stored images InstantReport Create PDF document directly from the camera
Features: Excellent ergonomics: The FLIR T460 has a tiltable infrared unit and auto-orientation, which make it easy to capture images from any angle comfortably. The small size and low weight of the camera facilitate its use over a full working day. Affordable performance: The FLIR T460 is equipped with the innovative Multi Spectral Dynamic Imaging (MSX) feature, which produces an image richer in detail than ever before. You can highlight objects of interest, on both the infrared and visual images, by sketching or adding predefined stamps directly onto the cameraâ??s touch screen. Extensive communication options: The Wi-Fi connectivity of the FLIR T460 allows you to connect to smart phones or tablets for the wireless transfer of images or the remote control of the camera. The Bluetooth-based METERLiNK function transfers readings from external measurement instruments to the infrared image. Support for UltraMax: When enabling UltraMax in the camera, the resolution of images can be substantially enhanced when importing the images into FLIR Tools.
Trimble 5800 GPS Base or Rover 450-470 MHz Receiver Trimble 5800 GPS Rover Receiver 450-470 MHz w/ Options... - CMR Inputs - CMR Outputs - RTCM Inputs - RTCM Outputs - Data Collector - Binary Outputs - Data logging - Bluetooth - UHF Transmit - Software Version 2.32 - Boot Version 2.30 - 450 - 470 MHz Radio Module P/N: 59400-66 - Factory Serviced SKU: GPS47 Item ID: X3190-L/T* Condition: Refurbished Warranty: 90 Day Exchange Trimble 5800 GPS Receiver The Trimble 5800 GPS receiver provides reliability and simplicity for basic surveying tasks. You can trust that the proven design of the Trimble 5800 will perform under the toughest conditions. Integrated System Because the Trimble 5800 GPS receiver's components are completely integrated, the system is lightweight and ergonomic and completely cable-free. 2 MB of internal memory makes collecting data for postprocessing extremely easy and efficient, whether for static or kinematic (stop-and-go) surveying. Advanced Technology The Trimble 5800 GPS system offers advanced Trimble GPS technology. It is a 24-channel dual-frequency GPS receiver, containing Trimble's proven Maxwell technology for robust tracking in difficult GPS environments. Two additional channels for WAAS and EGNOS tracking let you perform real-time differential surveys to GIS grade without a base station. The dual-frequency Trimble antenna enhances the tracking capabilities of the Trimble 5800 the patented four-point antenna feed provides submillimeter phase center stability for precise results. The position of the UHF radio antenna mounting further increases accuracy by being out of the GPS line-of-sight, reducing multipath and avoiding interference with the GPS antenna. For rover communications use the built-in 450 or 900 MHz radio, or use an external radio, cell phone or wireless packet data modem. For extended coverage and comprehensive error checking when roving, the Trimble 5800 works with signals from multiple base stations transmitting on the same radio channel. For even larger area coverage, at highest accuracies, the Trimble 5800 works with Trimble VRS networks. Integrated Bluetooth wireless technology enables cable-free communication between the receiver and your Trimble controller. Built For The Field As a rover, the Trimble 5800 is not only lightweight and cable-free; it also consumes minimal power. Two miniature batteries will power the receiver for up to 11 hours at least enough for a full working day. Environmentally rated to IPX7, and submersible to a depth of 1 m, the Trimble 5800 is rugged enough for any job. It can withstand a drop of up to 2 m on to a hard surface. Trimble 5800
Total station, video scope, flaw detector, xrf/libs analyzer, thermal imager, ndt equipment, 3d scanning, surveying equipment, laboratory equipment and other tester/analyzer.Export
