Satellite dish antenna ku band 45cm, 55cm, 60cm, 75cm, 80cm, 90cm, 100cm, 120cm Satellite dish antenna c band 150cm, 180cm, 210cm, 240cm Ku band offset dish C band prime dish Parabolic antenna ku band
RF Advantages: LoRa spread spectrum modulation technology, enabling long communication distance and very strong interference immunity Ultra-small size, surface mount design, easy to embed Support multiple modulation modes to facilitate network use Support deep custom designs and other special applications Easy to produce, free of RF debugging Support frequency hopping communication (LoRa mode) Support specified node communication and broadcasting communication modes to facilitate customers to Set up the wireless network Support self cycle reset function Support module firmware upgrading Application: AMR Auto Meter Reading, Network Communication, Remote Control, Mine Monitoring, Industrial Control, etc. Parameter: Frequency: 433/470/868/915MHz (¡¡¡ì¡¨¨ 20MHz Provide for setting) Modulation Mode: LoRa/FSK Output Power: 2~20dBm Sensitivity: -139dBm (Max) Data Rate: 1.2~115.2Kbps(Provide for setting) Tx Current: 130mA (+20dBm) Rx Current: 20mA Standby Current: 2|¡¡ì¬A Frequency Deviation: 10~50kHz Receive Bandwidth: 42~166kHz Interface: 8N1/8E1/8O1 TTL UART(Scalable exteriorRS232\RS485) Communication Distance: > 5000m@LoRa Antenna Impedance: 50|¸ Operation Temperature: -20 to +70 Power Supply Mode: DC4.5~5.5V Module Size: 47X26X10mm Certifications: FCC\ETSI\RoHS Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
Application: Wireless Remote Control Switch, Smart Plug, Wireless Doorbell, Vehicle Anti-Theft Device(RKE), Weather Station, etc. RF Advantages Parameters flexibly configurable and modifiable with software, simple and user-friendly operations High measured sensitivity, narrowband applications, long communication distance Easily passing safety Blocking Test, very good immunity Integrated DutyCycle operating mode, reducing the average operating current, ultra-low power consumption Different frequencies can be set with software without changing the crystal, reducing peripheral components Parameter: Frequency: 300~960MHz (Support software settings) Modulation Mode: OOK/(G)FSK Data Rate: 0.5~30Kbps/0.5~100Kbps(FSK) Sensitivity: -114 dBm(1kbps 0.1%BER) Measured Distance: Product: > 300m, Demo Board: > 1000m Blocking Immunity: SR=1Kbps, ¡¡¡ì¡¨¨ 1/2/10MHz, Offset: 52/74/75db Power Supply: 1.8~3.6V Rx Current: 4.2mA@434MHz; 4.6mA@868MHz Duty-Cycle Rx Mode: Support software settings, Reduce average working current Receiver Start-up Time: DutyCycle: On 12.3ms/off 7.3ms Receiver Wake-up Time: < 1ms Wake On Radio Function: Provide for setting of Preamble, Syncword and other conditional wake-up Crystal: 26MHz+/-20PPM Program Limes: One million times Operation Temperature: -40~+85 Communication Mode: SPI-3Wire Chip Package: QFN-16 IC Size: 3X3X0.75mm Certifications: RoHS\REACH\CE, etc. Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
Application: Remote controller. RF Advantages: Cost-effective solution of SoC Single-Chip Remote Controller Parameters flexibly configurable and modifiable with software, simple and user-friendly operations Maximum power output of 13dBm, adjustable Different frequencies can be set with software without changing the crystal, reducing peripheral components Parameter: Frequency: 240~480MHz(Support software settings) Modulation Mode: OOK Data Rate: 0.5~30Kbps Output Power: -10~+13dBm(Support software settings) Output Power programmable with steps: 1dBm Second Harmonics: 315\434M@+13dBm: -60dBm/-52dBm Third Harmonics: 315\434M@+13dBm: -65dBm/-60dBm Power Supply: 1.8~3.6V Operating Current: 18mA (+10dBm\50% duty cycle\9.6Kbps) Sleep Current: 1|¨¬A Crystal: 26MHz +/-20PPM Crystal Load Capacitance: 12~20PF(Support software settings) PLL Lock MODE: Dynamic lock Program Limes: One million times Operation Temperature: -40~+85 Communication Mode: Tx with MCU Chip Package: SOP-14 IC Size: 8.65X1.6X1.75mm Certifications: RoHS\REACH\CE, etc. Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
Application: AMR Auto Meter Reading, Industrial Control System, Wireless Remote Control Equipment, Mining Safety Monitoring, Smart Home, Smart Security, Internet of Things and Other Wireless Devices, etc. RF Advantages: High output power, very good receiver sensitivity, long communication distance Strong interference resistance to meet wireless certification standards Meet the requirements of mainstream wireless applications, high cost-effective No output power reduction at a supply voltage down to 1.8V Parameter: Frequency: 868/915MHz Modulation Mode: FSK/GFSK/OOK Output Power: 20dBm Sensitivity: -123dBm (1.2kb/s in FSK) Data Rate: 300Kbps (FSK mode) Tx Current: 125mA (+20dBm) Rx Current: 9.3mA Standby Current: 0.1|¨¬A Interface: SPI Communication Distance: > 1000m(1.2kb/s) Antenna Impedance: 50|¸ Operation Temperature: -40~+85 Power Supply Mode: DC1.8~3.7V, 1.8VTransmission power Of power supply will not fall Module Size: 16X16mm Certifications: FCC\ETSI\RoHS Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
WUCHUN AP TRANSMITTER TM302-A00-B02-C00-D00-E00 Relying on the profound industrial heritage of Deyang, Sichuan, YOYIK focuses on the innovative manufacturing of power generation equipment and accessories. The company not only has a modern production line, but also pays more attention to the training and introduction of talents. It has brought together a group of technical experts from well-known power station projects. They have integrated their valuable experience into product design and production, so that YOYIK's products always maintain an industry-leading position in performance and durability. From conventional accessories to customized solutions, YOYIK can always meet the diverse needs of customers. Yoyik can offer many spare parts for power plants as below: #DF-WUCHUN AP TRANSMITTER TM302-A00-B02-C00-D00-E00-DF Cathode head EPBS-G-II-150-YJ/XN DEH speed probe 159.00.96.03(1) Guide Vane Opening DYK-11-1010 lvdt linear 3000TDZ-A Power module DPC300D2BX-B01B LVDT Sensor LVDT-GT Sensor DF310880-90-08-02 Steam Turbine Speed Probe NE6103 LVDT Sensor FRD.WJA2-301H-50 AC Active power (Watt) transducer S3-WD-3-015A40N Magnetic level gauge UHZ-10C07N Fuse â?? LV HRC RS32(NGTC1) 690V-100kA aR [250A] Pressure Switch PS531SPP10/BB32N3/S30 TURBINE MAIN OIL TANK VACUUM PRESSURE LOW RC0450CZ089H PRESSURE SWICTH CONDENSER VACUUM 02-139479 Temperature element W2PM2-001 Linear Displacement Transducer for STG 191.36.09(1).01 (�±127mm) AC Current Transducer YPD-I-A2-P5-04-ZS Auxiliary power PSMU-1-12V/10W Bolt electric heating rod ZJ-20-37 Eddy Current Sensor PR6422/102-101 Signal transmitter ZKF-11 Speed sensor CS-1G-G-080-03-00 Digital Display SK-XMPC302-S8-J4-B00-X0-P0-T Differential Pressure Gauge CMS-I 0.3MPa tachometer sensor working principle CS-1 L=90 Differential pressure transducer RC861CZ090ZSS linear displacement transducer HL-3-50-15 LVDT Sensor 12000TDGN Double platinum thermistor WZP2-441(Pt100) Casing Expansion Monitor DF9032 MaxA Eddy Current Sensor PR6424/001-141 platinum resistance temperature detector WZP-231 Eddy Current Sensor PR6422/001-121 APH gap measurement probe GJCT-15-E Monitoring I/O modules IOC4T200-560-000-HHh WUCHUN AP TRANSMITTER TM302-A00-B02-C00-D00-E00 MY-DFYL-2024-10-11
Montage MS2437 . CPU: 4000DMIPS . GPU: Dual Core ARM Cortex A7 . Flash: 128MB . DDR: 256MB . 1 x F Type Female 75ohm RF input . 1 x RJ45(100M Ethernet) . 1 x HDMI 1.4 with HDCP1.4 . 1 x Mini AV . 1 x S/PDIF(Optical) . 1 x DC Jack Power Input Accessories are included in the giftbox: . RCU: (standard NEC protocal) . Battey(1.5V AAA) . User Manual . Giftbox . 12V 1A EU type PSU
Stainless Steel Receiver is used to receive the solvent in the process of production in Herbal Extraction Plants, Pharmaceutical Plants and Chemical Plants.
FUJI FKC Differential pressure transmitter ( FUJI FKC Flow Transmitter FUJI FDC Differential pressure transmitter ( FUJI FDC Flow Transmitter FUJI FKC Flow transmitter ( FUJI FKC FUJI FDC Flow transmitter ( FUJI FDC 1.Product Introduce The Fuji FCX -AIII differential pressure (flow) transmitter accurately measures differential pressure and converts it into an output signal of 4~20mA DC. Fuji transmitter utilizes a unique micromachined capacitance silicon sensor with advanced floating capsule structure and newer micro-processing technology, the transmitter has high accuracy, good stability, safety and reliability, and easy to use. It's small volume, light weight, good environment adaptability, and applicable to all fields. If using the hand held communicator(sold separately), it can be set and display via remote operation, without affecting the DC 4~20mA output signal of transmitter. Fuji FCX-AIII series transmitters with safety funtion have obtained the certificate of SIL certification by T�?V. 2ï¼?Fuji FKC Transmitter Features a. High accuracy Differential pressure (flow) transmitter can be carried out with high accuracy measurement in the range of 0.1 20000kPa. Standard accuracy: ± 0.065% High accuracy(optional) ± 0.05% There's no need to linear calibration when carrying out zero elevation or suppression. b. Excellent environmental adaptaboility The advanced floating cell protects sensor from temperature,static pressure and overpressure effect, and controls the total measurement error of the filed to the minimun. c. Excellent operability and easy to use Built-in RFI filter and lightning arrester Various anti-corrosive materials Built-in local configurator with 3 push buttons d.The transmitter can communicate using FUJI, HART, communication protocol, and also can use FOUNDATION FIELDBUS or PROFIBUS protocol after changing the electronic circuit. 3:Product Specification Measured fluid: Liquid,Gas,or vapour Range, operating pressure, and overrange limit:
NCS-TT105 temperature transmitter is a new generation of smart transmitter with FF Hl, PROFIBUS PA or HART technology. NCS-TT105 transmitter integrates abundant function blocks and realizes not only normal measurement function but also complicated control strategy. NCS-TT105 uses digital technology, so it can connect with many types of thermocouple and thermo resistive sensors. It has wide range and simple interface between field and control room, which reduces the expense of installation, operation and maintenance.
We have available following Ships spareparts for Sale: Siemens u' trasoric level transmitter
We have available following Ships spare parts for Sale: Product-Sensotec Model-811-FMG/1110-02 Made in USA
We have available following ships spares for Sale: Product- Electronic Diff Pressure Transmitter Maker-Yokogava Hokushin Model-Y/13A Part no-6411EA688 616
1550nm direct modulation optical transmitter with high index and agc function. It adopts high linearity and low chirp dfb laser, max. Output level comes to 10db. Built-in pre-distortion compensation and agc, apc, atc closed loop control, which improves the system index obviously. It can be used in fttx (â?¤10km) of second-grade service area (sub-headend), also can be used in wdm narrow-band multiplexing and ip/qam. Feastures: 1> low chirp, high linearity dfb laser, chirp compensation. 2> advanced front panel with digital display function 3> agc fiber/ rf in, fiber out. 4> dual module rf driver , high efficient laser pre-distortion adjustment. 5> full-automatic omi control, agc & mgc. 6> intuitionistic modulation status display. 7> built-in dual back-up power supply, switch automatically . 8> casing temperature auto-control, ensure the long life of the laser
Key Features: 1.Rugged, wear & tear resistant sensor design 2.High corrosion resistant 3.Rinsable pressure chambers 4.Suitable for aggressive media 5.Unaffected by vibration, radiation, dirt etc Key Specifications: 1.Measuring range: 0 ~ 100 mbar to 0 ~ 25 bar 2.Measuring principle: fluid filled membrance / diaphragm system with inductive pickup system 3.Maximum static pressure: 100 bar 4.Measuring span: can be set steplessly from 20% ~ 100% of the full scale 5.Measuring start: can be set steplessly from 0% ~ 100% of the measuring range when the characteristic curve falls (switchable) can be set steplessly from 100% ~ 0% of the full scale 6.Temperature or measuring media: -10 °C to +70 °C 7.Ambient temperature: -10 °C to +70 °C 8.Electromagnetic compatibility: DIN EN 61000-6-2 (interference resistance), DIN EN 61000-6-4 (emitted interference) 9.Output: analog 0/4-20mA, with characteristic curve of linear, rising or falling (switchable) 10.Measuring membrane: Nickle-Beryllium / Duratherm 11.Fluid Filling: Baysilone oil PD 5 12.Measuring chamber, separating membrane: Chromium nickel steel 1.4571 (AISI 316Ti) 13.Protection: IP as per EN 60529 / IEC 529 14.Product qualification: in compliance with KTA 3505 Application areas: 1.Water and effluent treatment plants, and other filtration applications 2.Filter condition monitoring 3.Flow measurement of steam and hot water, using differential pressure flow sensors, in 4.remote heating systems 5.Pump Control dependent on differential pressure in block unit heating power stations Application areas: 1.Nuclear power plants 2.Manufacturing and chemical plants 3.Marine, shipping application 4.Onshore and offshore area 5.Petrochemical, solvent industry 6.Sewage, effluent treatment plants
Key Features: 1.Configurable measuring range 2.Configurable parameters via LCD Display, keypad 3.Integrated operating pressure measurement up to 40 bar 4.Suitable for non-corrosive gaseous media and vapour 5.Corrosion resistant field housing 6.Oil and grease free for oxygen applications Key Specifications: 1.Measuring range: 0 ~ 160 mbar to 0 ~ 2.5 bar 2.Maximum static pressure: 40 bar 3.Design: Differential pressure measurement, with or without integrated operating pressure measurement (25 bar or 40 bar) 4.Electrical output: differential pressure & operating pressure â?? 4-20mA 2-wire connection 5.Maximum pressure load: one-sided overpressure-proof up to the rated pressure of the measuring system, resistance to under-pressure on the (+) and (-) side 6.Linearity: < 1% Full scale 7.Ambient temperature: -20 �°C to +70 �°C 8.Admissible media temperature: -20 �°C to +70 �°C 9.Characteristic curve: linear 10.Pressure connection: inner thread G 1/4 cutting ring screw connection for 8 or 10 mm pipe 11.Measuring membrane: 1.4305 NiBe for differential; Al2O3 for operating pressure 12.Protection: IP65 as per EN 60529, with integrated ceramic sensor Application areas: 1.Filter condition monitoring 2.Flow measurement and control 3.Pump Control Application areas: 1.Nuclear power plants 2.Manufacturing and chemical plants 3.Marine, shipping application 4.Onshore and offshore area 5.Petrochemical, solvent industry 6.Sewage, effluent treatment plants
Key Features: 1.High accuracy 2.Robust and compact design 3.Overload protection 4.High vibration resistant 5.Minimum hysteresis Key Specifications: 1.Measuring range: -1.0 ~ 0.0 bar to -1.0 ~ -24.0 bar (max. pressure: 3 ~ 80 bar) 0.0 ~ 1.6 bar to 0 ~ 60.0 bar (max. pressure: 5 ~ 200 bar) 2.Linearity: < 1% full scale 3.Hysteresis: < 0.5% full scale 4.Permissible ambient temperature: 0° C ~ +60° C 5.Permissible medium temperature: 0° C ~ +85° C 6.Protection class: IP65 acc. to DIN EN 60529 7.Materials (media contact): chrome nickel steel 1.4305, ceramics, AL2O3, gaskets 8.Material (housing): Chrome nickel steel 1.4305 9.Nominal power supply: 24 VDC / AC 10.Output: linear, 4~2-mA / 0~10 V, 2/3-wire Industrial areas: 1.Nuclear power plants 2.Thermal / gas fired power plants 3.Chemical & manufacturing industries 4.Semiconductor plants
100Gbps QSFP28 SR4 with DDM Transceiver Item NO.:EQSP10A-3MCD01 Date rate: 100G Wavelength:850nm Distance:100M Connector:MPO First:MM DDM:YES Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package or 10pc/package Features Up to 27.952 Gbps Data rate per channel� Maximum link length of 100m links on OM3 multimode fiber� High Reliability 850nm VCSEL technology�Electrically hot-pluggable� Digital diagnostic SFF-8436 compliant�Compliant with QSFP28 MSA�  Case operating temperature range:0°C to 70°C�Power dissipation < 2.5 W� Applications 1.Gigabit Ethernet 2.Fiber Channel 3.Switch to Switch interface 4.Switched backplane applications 5.Router/Server interface 6.Other optical transmission systems
New sfp 155m bidi 80km optical transceiver cisco huawei compatibility Specification Data rate: 155m Wavelength: tx1490/rx1550nm Distance: 80km Interface: lc Ddm: yes Place of origin: made in china Port:shenzhen Working temperature: commercial: 0â°c to +70â°c;industrial:-40â°c to +85â°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Scope of application: switch, ethernet, data center, sdh, sonet, atm Package type: individual package or 10pcs/package
10G SFP+ Optical Transceiver 40KM Specification Data rate: 10G Wavelength: Tx1330/Rx1270nm Distance: 40KM Interface: LC Fiber: SM DDM: Yes Place of origin: Made in China Port:Shenzhen Working temperature: Commercial: 0C to +70C;Industrial:-40C to +85C Optical module used in Ethernet, SDH, Sonet,Can be compatible with CISCO 2900 Series,CISCO 4000 Series, CISCO 5000 Series,HUAWEI, the pole into, D-Link, ZTE, HP, juniper and other equipment. Our products require strict testing standards,standard packing form,to provide customers with quality service and timely delivery cycle. Scope of application: switch, Ethernet, data center, SDH, SONET, ATM Package type: Individual package or 10pc/package.