FUJI FKC Differential pressure transmitter ( FUJI FKC Flow Transmitter FUJI FDC Differential pressure transmitter ( FUJI FDC Flow Transmitter FUJI FKC Flow transmitter ( FUJI FKC FUJI FDC Flow transmitter ( FUJI FDC 1.Product Introduce The Fuji FCX -AIII differential pressure (flow) transmitter accurately measures differential pressure and converts it into an output signal of 4~20mA DC. Fuji transmitter utilizes a unique micromachined capacitance silicon sensor with advanced floating capsule structure and newer micro-processing technology, the transmitter has high accuracy, good stability, safety and reliability, and easy to use. It's small volume, light weight, good environment adaptability, and applicable to all fields. If using the hand held communicator(sold separately), it can be set and display via remote operation, without affecting the DC 4~20mA output signal of transmitter. Fuji FCX-AIII series transmitters with safety funtion have obtained the certificate of SIL certification by T�?V. 2ï¼?Fuji FKC Transmitter Features a. High accuracy Differential pressure (flow) transmitter can be carried out with high accuracy measurement in the range of 0.1 20000kPa. Standard accuracy: ± 0.065% High accuracy(optional) ± 0.05% There's no need to linear calibration when carrying out zero elevation or suppression. b. Excellent environmental adaptaboility The advanced floating cell protects sensor from temperature,static pressure and overpressure effect, and controls the total measurement error of the filed to the minimun. c. Excellent operability and easy to use Built-in RFI filter and lightning arrester Various anti-corrosive materials Built-in local configurator with 3 push buttons d.The transmitter can communicate using FUJI, HART, communication protocol, and also can use FOUNDATION FIELDBUS or PROFIBUS protocol after changing the electronic circuit. 3:Product Specification Measured fluid: Liquid,Gas,or vapour Range, operating pressure, and overrange limit:
NCS-TT105 temperature transmitter is a new generation of smart transmitter with FF Hl, PROFIBUS PA or HART technology. NCS-TT105 transmitter integrates abundant function blocks and realizes not only normal measurement function but also complicated control strategy. NCS-TT105 uses digital technology, so it can connect with many types of thermocouple and thermo resistive sensors. It has wide range and simple interface between field and control room, which reduces the expense of installation, operation and maintenance.
We have available following Ships spareparts for Sale: Siemens u' trasoric level transmitter
We have available following Ships spare parts for Sale: Product-Sensotec Model-811-FMG/1110-02 Made in USA
We have available following ships spares for Sale: Product- Electronic Diff Pressure Transmitter Maker-Yokogava Hokushin Model-Y/13A Part no-6411EA688 616
ZHC618F-1000W Compact Fm Stereo Transmitter OVERSTOCK SALE -1000 Watts FM Radio Transmitter.....40 units @ 3,500 usd / each Input: Analog + Digital Output Interface: 7/16 Power Supply: 220V / 50 Hz -4-Bay FM Dipole Antenna(160 antennas)..40 sets @ 1,800 usd / each Input Interface: 7/16 Includes; 4-way splitter; branch cables and fixtures -30 Meter feeder cable with connectors 40 cables @ 280 usd / each -3 Kw single phase voltage stabilizer (220V / 60Hz) 40 units @ 450 usd / each Manufacturer: ZHC Digital Equipment Co. LTD
Transceiver SFP+ 1310nm 10G 10km LC Interface with DDM Commercial Temperature
Vasthi Instruments are global leaders in manufacturing of Dew point transmitter and have been supplying instruments to customers worldwide, Our multidisciplinary team of scientists, physicians, engineers, and regulatory consultants with decades of global experience brings you the quintessential mechanism that provides complete safety accuracy and durability. Vasthi Instruments was formed with visionary thinking and innovative ideas resulting in innovative products and solutions. We enhance our product quality by the continuous process of research and development. We have WIDE range of models to suite various site conditions and processes
Product Features 1. The intelligent radar level meter uses advanced microwave processing technology and unique Echo Discovery echo processing technology. The product can be applied to various complicated working conditions. 2. "False Echo Learning" function enables the meter to accurately identify true echoes under multiple false echo conditions, thereby obtaining accurate measurement results. 3. A variety of process connection methods and types of detection components can be customized according to customer needs. 4. Using pulse working mode, the product's transmitting power is extremely low, and it can be installed in various metal and non-metal containers without harming the human body and the environment.
Product Principle Very short microwave pulses with very low energy are transmitted and received through the antenna system. Radar waves travel at the speed of light. The running time can be converted into a level signal by electronic components. A special time extension method ensures stable and accurate measurements in a very short time. Even if the working conditions are more complicated and there are false echoes, the latest micro-processing technology and debugging software can accurately analyze the level echo. Product Application The 6GHz intelligent series radar level gauge is suitable for non-contact continuous measurement of the level of liquids, pastes, particles and blocks. It is suitable for occasions with large changes in temperature and pressure; inert gas and volatility. It adopts the measurement method of microwave pulse and can work normally in the range of industrial frequency band. The beam energy is low, and it can be installed in various metal or non-metallic containers or pipes without harming the human body and the environment.
Product Overview GML601-B high-precision small dead zone ultrasonic material (liquid) position meter is developed by our company for small blind area, high precision and small space working condition measurement and control. The first domestic ultrasonic measuring range with a blind zone of less than 0.06m and an accuracy of �±1mm (has won the National Science and Technology Innovation Fund Project Award, Xi'an High-tech New Product, and Xi'an Key New Product). The outer casing is made of ABS engineering plastic waterproof casing. The probe part is made of PP or stainless steel. The casing is small and quite sturdy. The transparent main cover is designed for easy observation. The main chip adopts imported industrial-grade single-chip microcomputer, digital temperature compensation and ultra-wide voltage input voltage regulator and other dozens of related ASICs to make the product performance more stable and reliable. It has strong anti-interference ability, can be set by the host computer software to set the upper and lower limit nodes and online output adjustment, select analog, switch and RS485 output, convenient interface with related facilities. It has high reliability, no pollution, stable performance, and can meet most liquid level and material level measurement requirements without contacting industrial media. It completely solves the shortcomings such as winding, clogging, leakage, medium corrosion, and inconvenience caused by traditional measuring methods such as pressure type, capacitance type, and float type. Therefore, it can be widely used in various fields related to material level and liquid level measurement and control. This product has been tested and approved by the national authority. This product meets the requirements of GB3836.1-2010 and GB3836.4-20010 national standards. The explosion-proof mark is ExiaIIBT4Gb. Product Features 1.Sturdy and stable sensor for harsh industrial applications 2. Strong anti-interference, can set upper and lower limit nodes and online output adjustment 3. Built-in temperature sensor of the transducer realizes real-time automatic temperature compensation of measured values. 4.4~20MA current output, optional field bus interface 5.China's first 0.06m small blind zone level gauge
GML601-A general-purpose ultrasonic material (liquid) position meter is a Powerful ultrasonic level transmitter, which has taken advantage of many kinds of level instruments at home and abroad. The universal level meter with full digital and humanized design concept has perfect level measurement and control, data transmission and human-computer communication. This product adopts modular circuit design, military quality multi-layer PCB board, compact hardware structure, and reasonable layout. This product supports isolated 4-20mA output, built-in GPRS, RF, LORA, Bluetooth, Wifi to achieve wireless data transmission such as the Internet of Things, support MiniSD card data acquisition or USB storage, can also add modules to achieve other functions according to customer needs. GML601-A uses imported industrial-grade chips, digital temperature compensation, etc... related ASICs. It has a strong anti-interference ability, can set arbitrarily upper and lower limit nodes and online output adjustment, and has an on-site display. The outer casing is made of engineering plastic ABS waterproof casing, and the casing is compact and quite sturdy. This product can meet most liquid level and material level measurement requirements without touching industrial media, and completely solves the shortcomings such as winding, clogging, leakage, medium corrosion and inconvenience caused by traditional measurement methods such as pressure type, capacitance type, and float type. Therefore, it can be widely used in various fields related to material level and liquid level measurement and control. This product has been tested and approved by the national authority. This product meets the requirements of GB3836.1-2010 and GB3836.4-20010 national standards. The explosion-proof mark is ExiaIIBT4Gb.
Product Number: IDP10-A22C01F-M1 Features Silicon strain gauge sensors successfully fieldproven in many thousands of installations. Simple, elegant sensor packaging, with very few parts achieves exceptionally high reliability. Transmitter available with traditional or low profile structures (see photos above). Aluminum housing has durable, corrosion resistant epoxy finish; 316 ss housing also available; both meet NEMA 4X and IP66 ratings. Can be provided as a sealed measurement system with numerous configurations of direct connect or capillary connected seals available. SIL2-Certified Transmitter offered as an option. Optional mounting bracket sets allow pipe, surface, or manifold mounting of transmitter. Remote configuration with HART communication protocol in a single loop or multidrop mode; or locally via optional LCD indicator. Multi-marking is available for FM, CSA, and ATEX intrinsically safe installations. The user determines and permanently marks on the data plate the certification to be applied. User-entered cutoff point from 0 to 20% of maximum flow. Dual Seal certified by CSA to meet ANSI/ISA 12.27.01-2003 requirements. Industry standard 316L ss, Co-Ni-Cr, Nickel alloy�¹, Monel, or Tantalum sensor materials, depending on transmitter structure. Equivalent to Hastelloy�® C. Hastelloy is a registered trademark of Haynes International, Inc Estimated Lead Time: 8 - 10 Weeks Shipping Weight: 5 Kg
Quick Details Place of Origin: Sichuan, China (Mainland); Brand Name: SAND; Model Number: PT; Pressure Range:: 0~5~150MPa (20000psi); Accuracy:: 0.5% FS; Power:: 10V DC (6~12V DC); Signal Output:: 3.33mV/V (Full 33.3mV) or 3.0mV/V (Full 30mV); Probe Temperature:: 300 / 400; Temperature Drift::
Quick Details Place of Origin: Sichuan, China (Mainland) Brand Name: SAND Model Number: PT124B Pressure Range: 0~5~150MPa / 0~500~20000psi Accuracy: ±1.0%FS Power: 24VDC(9~36VDC) Output: 0~5V or 1~5V or 0~10V or 0~20mA or 4~20mA Probe Temperature: 400 Temperature Drift:
1~2 Channels L-band Satellite Optical Transceiver Introduction CLB satellite L band signal optical transceiver consist of transmitter and receivermainly convert the L-band analog signal or digital signal from LNB of satellite antenna into optical signal, and transmit it via fiber in fully transparent, high quality and long distance methodMainly apply in space satellite, military satellite live satellite L-Band fiber uplink /downlink Features: 1. Use in multiple antenna signal transmission such as C band, KU band etc., transmit 1~2 channels 950MHz~2150MHz satellite signal 2. Adopts 19 1U standard frame chassis, the color LCD on front panel shows the information of optical power, temperature, working voltage, input or output RF Level etc. 3. For LNB, transmitter can supply power via RF port, on does not supply power for it, if supply power, the output voltage is +13V or +18V Max. output electric current is 450mA user can set it via LCD color screen 4. The LCD of optical transmitter can show optical transmitting power, LD working electric current, the temperature of optical transmitter, the output Voltage for LNB, Input RF signal level 5. Optical receiver can supply power via RF port, input voltage is +13V or +18VMax. Output electric current is 300mAalso can supply power via the AC220V dual power supply of the equipment
HR310 Series Digital Pressure Transmitter 1.overview HR310 series digital pressure transmitter is one of excellent products in our company, Which use advanced and mixed signal processing technology and unique compensation methods to realize high precision digital pressure measurement, Full scale digital linear calibration, full temperature digital compensation, compensation parameter stored in nonvolatile memory, multiple safety protection system to avoid the products cannot be used due to calibrate parameter lost; part of Circuits have power and watchdog monitor, mechanical part with full seal stainless steel structure, both of them remarkably improve the reliability of transmitter. The high precision digital pressure transmitter is widely and successfully used in many industries, such as pressure measurement in industrial process, hydrology and water conservancy, and geological prospecting etc. 2. Features High stable pressure sensing unit, with long-term stability High precision, up to 0.05ï¼?F.S(Linearity, repeatability, hysteresis); Adopts mixed signal microprocessor and Higher order fitting algorithm to realize high precision compensation Standard RS485 MODBUS-RTU Protocol, can be used in DCS or PLC system Low power consumption, when operating at full scale then the power consumptions about 4mA, outstanding advantage when use outside battery supply Anti-surge, electromagnetic interference
HR3051-LT Differential Pressure Level Transmitter overview The diaphragm of the differential pressure level transmitter is used to prevent the medium in the pipeline from directly entering the pressure sensor component of the differential pressure transmitter. It uses a filling fluid such as silicone oil to transmit pressure between the transmitters. The HR3051-LT differential pressure level transmitter be used for measuring the level, density, pressure, and flow of a liquid, gas, or vapor and converts it into a 4-20 ma DC HART current signal output. The RP2001 can also communicate with the RST375 handheld te rminal or the RSM100 Modem for parameter setting, process monitoring, and more. The measuring range of the HR3051-LT differential pressure level transmitter (when not moved) is 0-1kPa~2MPa, and the rated pressure of the liquid level flange is: 1.6/4MPa, 6.4MPa, 10MPa, 150psi, 300psi or 600psi. Working principle and structure The HR3051-LT differential pressure level transmitter consists of a HR3051-DP differential pressure transmitter and a soldered liquid level flange. Its working principle is the same as HR3051-DP type differential pressure transmitter (see HR3051-DP type differential pressure transmitter technical specification), except that the pressure transmission path on the positive pressure side is slightly different: the pressure acting on the high pressure side is firstly The diaphragm and filling liquid on the liquid level flange pass through the transmitter body and finally reach the high voltage side of the measuring sensor. Comparison of range code and range limits Range code Minimum range Maximum range Rated pressure (maximum) B 1kPa 6kPa Rated pressure of the liquid level flange
HR3210 Micro-power Pressure Transmitter overviews HR3210 series are lower power consumption pressure transmitter,which produced especially to measure liquid pressure in the field without power supply. It is stable, reliable, high precision and easy to assembly and disassemble. It uses well-known brands pressure sensor in the world and 1Cr18Ni9Ti stainless steel structure, intrinsic safety type circuit design. The biggest advantage of the transmitter is low power consumption , the operating current is lower than 900uA, so it is easy for dry battery to supply in the field. Quick response, the single-chip can be used to make the intermittent power supply pressure acquisition system. It can reach the balance within 400 uS when power on, obtain accurate data, and then turn off the power. It will turn on when collecting data. Features .Long time and reliable operating .Low power consumption, high accuracy .Protection by the isolated and stainless steel 316L diaphragm, anti-corrosion Specifications Range 0ï½?1ï¼?1.6,2,2.5ï¼?â?¦100Kpaï¼?MPa Over-load liquid level 1.5tims F.S accuracy ±0.25%FS, ±0.5%FS, ±1%FS (Non linearity, repeatability, hysteresis) Operating Temp. ï¼?15ï½?+60 Compatible medium Compatible with 1Cr18Ni9Ti and fluoro rubber Operating current < 900uA Output Signal 0.25ï½?2.25Vdcï¼?0.25-2.25Vdcï¼?0.5-4.5Vdc Voltage 3ï½?5Vdcï¼? Insulation > 100MΩ@500V Electrical connections Direct cable, housing protection IP65 Pressure interface M20Ã?1.5M; or customized Response time
HR3288 HART Smart Pressure Transmitter Overview .HR3288 HART protocol Smart Pressure Transmitter is a high-precision, high-stability, multi-parameter, 4.5 Digit LCD displayed intelligent pressure measurement products which complies with the HART® protocol. Users can use the HART communicators to manage, adjust or monitor process variables when HART instruments running in the process, or use the buttons for on-site configuration ,it's easy to operate. .This product adopts the latest application results of digital technology in the field of sensor manufacturing, and combined with the most advanced designing and manufacturing pressure transmitter technology in the world, precision digital temperature compensation and nonlinear calibration technology, safe and reliable explosion-proof structure and standardized signal output with high accuracy and wide range coverage,its also adapt to the place where fluid pressure is precisely measured. .The product works in a two-wire mode and can be directly replace the simulative two-wire 4mA-20mA DC output transmitter. Digital communication with manual operator. Electromagnetic radiation fits IEC801 standard. Features .4mA~20mA DC current output superposition HART protocol digital communication (two-wire system) . Digital compensation and nonlinear calibration techniques . Digital error correction with local, remote zero and range calibration functions . digital wide temperature compensation in -10 ° C ~ 80 ° .can be operated by buttons to facilitate configuration. .Reverse power protection, over voltage protection . Anti-surge, Anti-electromagnetic interference
