Sfp Transceiver.
Sfp Transceiver.
Pressure transmitter and temperature transmitter and display.
Sfp transceiver, sfp+ transceiver, xfp transceiver, x2 transceiver, xenpak, qsfp+, cfp, cfp2, cfp4, qsfp28, dac, aoc..
Various types of pressure transmitter (transducer) pressure sensor, pressure switch, pressure gauge, pressure controllers.
Transmitters.
Satellite digital receivers.
SFP Transceiver..
transmitter.
The ZP050 Temperature Transmitter is designed to meet common Single Point measurement application requirements. This transmitter can easily work with a variety of sensors (RTDs and thermocouples) and thermowells. It provided in a head mount configuration suitable for installation in a wide variety of connection heads and housings. Provide HART protocol, equipped USB mini-USB interface, easy-to-use configuration method from any PC. Power Supply 12VDC~40VDC Input Types 4-20mA / 20-4mA; RTD(PT100,PT200,PT500,PT1000,Cu50); R(0-400 ,0-4000 ); TC(K,E,S,B,R,J,T,N); mV(-80-+80mV); V(0-1V) Output signal types 4-20mA or 0...1/5V, 0...1/10V Response Time < 0.4S (0-90%,100%-10%) Precision ±0.05% Temp. Drift 0.01% per Celsius Volt fluctuation influence �±0.005% X span / below V DC Load Capacity < 700 in 24VDC; (mA output) < 1060 in 36VDC (Volt output) Isolation Strength AC1500v 1min between the input / output IP Ranking Casing/Terminal IP50/IP20
> User configurable CO ranges up to 1000 ppm > Optional 4-digit dual row LCD display to display carbon monoxide value in ppm > Field replaceable CO sensor > Health / status (Heartbeat) LED > DIP selectable Loop powered current output or voltage output available > Optional dual 2-wire output available > IP65 protection for enclosure > Wall mount arrangement > Internal switch provided to adjust zero ppm >DIP for range selection
> User configurable CO ranges up to 1000 ppm > Optional 4-digit dual row LCD display to display carbon monoxide value in ppm > Field replaceable CO sensor > Health / status (Heartbeat) LED > DIP selectable Loop powered current output or voltage output available > Optional dual 2-wire output available > IP65 protection for enclosure > Wall mount arrangement > Internal switch provided to adjust zero ppm >DIP for range selection
> 2 x 2-wire, 4~20 mA or 0~10V DC outputs with RTD resistance output option > Any or both outputs can be assigned to RH or T or Dew point or specific derived physical quantity > RH & T range selection, parameter configuration and calibration with > USB to serial converter (DCC501) > Handheld configurator (HHC202) > Inbuilt LCD and 3 keys >. Health / status (Heartbeat) LED > Calculated physical quantities -Dew point -Absolute humidity -Heat index -Enthalpy -Air density > Isolated RS485 / MODBUS RTU or BACnet MS/TP > Replaceable RH+T sensor > Convenient installation with 2-part housing with fixed back and removable electronics > Stylish housing with vents for air flow across sensor for better accuracy
PTX201 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and mild corrosive fluids. >All stainless steel construction >Excellent load cycle stability and shock resistance >4~20 mA, 2-wire output >Ranges up to 400 barg >DIN 43650 plug-in connector >Higher ranges on request >Integral LED or LCD display
PTX201 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and mild corrosive fluids. >All stainless steel construction >Excellent load cycle stability and shock resistance >4~20 mA, 2-wire output >Ranges up to 400 barg >DIN 43650 plug-in connector >Higher ranges on request >Integral LED or LCD display
PTX201 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and mild corrosive fluids. >All stainless steel construction >Excellent load cycle stability and shock resistance >4~20 mA, 2-wire output >Ranges up to 400 barg >DIN 43650 plug-in connector >Higher ranges on request >Integral LED or LCD display
PTX201 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and mild corrosive fluids. >All stainless steel construction >Excellent load cycle stability and shock resistance >4~20 mA, 2-wire output >Ranges up to 400 barg >DIN 43650 plug-in connector >Higher ranges on request >Integral LED or LCD display
PTX201 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and mild corrosive fluids. >All stainless steel construction >Excellent load cycle stability and shock resistance >4~20 mA, 2-wire output >Ranges up to 400 barg >DIN 43650 plug-in connector >Higher ranges on request >Integral LED or LCD display
PTX201 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and mild corrosive fluids. >All stainless steel construction >Excellent load cycle stability and shock resistance >4~20 mA, 2-wire output >Ranges up to 400 barg >DIN 43650 plug-in connector >Higher ranges on request >Integral LED or LCD display
PTX201 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and mild corrosive fluids. >All stainless steel construction >Excellent load cycle stability and shock resistance >4~20 mA, 2-wire output >Ranges up to 400 barg >DIN 43650 plug-in connector >Higher ranges on request >Integral LED or LCD display
