Anti-aging, anti-ozone, good electrode and tire bearing. Apply to the rubber construct of bridge engineering, roof water- proof, punching rubber washer and sealing fittings Specific gravity 1.4, strength 8mpa, tension 300% , hardness 70
With middle pressure, work in the 5~60 C surroundings, with the features of water-proof, anti-shock and sealing according to the requirements of technical parameters, which can be applied to manufacture of kinds of sealing buffer washer, rubber mat, seals and the decoration and pavement of ground Colors: black, milk white, grey, red, green, blue Woven bag 50kg/volume 100 kg/volume or customize the length to pack in accordance with the needs of the customer
With middle pressure, strong tense and small distortion Punching seals and rings, which are applied to light conveying strap and work in the surroundings with high strength requirements Rubber materials can be produced in accordance with the needs of the clients. Specific gravity 1.4~1.6 Tearing 3.5Mpa Tension 200% Hardness 70 5 Customized according to the colors provided by the customers Woven bag 50Kg/volumeíó100 Kg/volume or customize the length to pack in accordance with the needs of the customer
Product: round stud, button rubber sheet Dimensions:4.5mm-60mmx1220mm Performance: water proof, anti-slip and beautiful Density:1.6g/cm3 Tensile strength:>3.0mpa Hardness:70shorea Elongation:>200% Work temperature:-30-70c Application: pave
Neoprene rubber sheets Product name: neoprene rubber sheets Dimensions: 1-80mmx2000mm(txw) Performance: good climate resistant function in oil media Density:1.5g/cm3 Tensile strength:>4.0mpa Hardness:70shorea Elongation:>250% Work temperature:-30-70c Application: work in oil environment
product:anti-static rubber sheet dimensions: 2-60mmx2000mm(TXW) performance:eliminating static disturbance, good electrode volume resistance rate:104-108?fªCM density:1.6g/Cm3 Tensile strength+¼f?.0MPa hardness:65shoreA Elongation:f?00 % work temperature:-30-70 C application:electronic occasions
Product Name:conductive rubber sheet Dimensions: 1-80mmx2000m(TXW) Density:1.4g/cm3 Tensile strength:>=8.0MPa Hardness:60+/-5shore A Elongation:>=350% Application: electronics,textile industry,with good flexibility,and conductivity,bulk resistivity under 104++.cm
Silicone rubber sheet Product Name:silicon rubber sheet Dimensions: 1-80mmx2000m(TXW) Density:1.25g/cm3 Tensile strength:>=5.0MPa Hardness:60+/-5shore A Elongation:>=300% Work temperature:-50-200 C Application: chemical, foods and pharmacy
Product: corrugated, ribbed rubber sheet Dimensions:3-20mmx2000mm Performance: length seamless in continuous production , multiple colors available for option. Density:1.6g/cm3 Tensile strength:>3.0mpa Hardness:65+/-5shorea Elongation:>250% Application: pave, sports ground and flooring decoration
All kinds of specifications could be made by different requirements. 1) Available material: Materials for silicone, fluoro silicone, viton (FKM), neoprene, HNBR, NBR+PVC, NBR, natural rubber, SBR, IR, IIR(butyl rubber), CR (neoprene), EPDM, SBR, AU, ACM and CO 2) All manufacturing processes confirm to the ISO-9001: 2000, 3) Excellent chemical and physical property 4) Advanced production line 6) Color and shape can be changed upon request 7) We are able to design and manufacture complete sets of rubber parts based On customer's specifications 8) Accept customer's design and specifications 9) Available in various sizes and colors.
This kind of Liquid Silicone Rubber Products (LSR) are suitable for parts of medical treatment etc. All kinds of specifications could be made by different requirements. Technology Theory: Due to LSR is solidified by pyrogenation molding reactivity, so the speed of solidify is quickly and it increases production efficiency of LSR products. Main Function: LSR products are used in developed countries widely, used in sanitation bathroom, medical equipments and advanced commodities and so on.
Silicone rubber keypads With epoxy cap and plastic electroplating Available in epoxy coating or paint-sprayed, with colored keys upon request Mechanical properties: Operating temperature: -40 t180 degrees celsius Storage temperature: -55 t250 degrees celsius Operating life: 5 x 105 t3 x 107 cycles Actuation force: 20g t500g Key stroke: 0.3mm t5mm Electrical properties: Contact resistance: < 100 ohms Insulation resistance: > 10m ohms Contact bounce: < 20ms Insulation breakdown: 26kv/mm
Rubber dam Rubber dam has proved to be a cost-effective approach for solving problems in the irrigation, hydroelectric, recreation and water conservation industries. The most important benefits of bridgestone rubber dam are: Low cost compared to other controllable gates Low environmental impact Long service life Very low maintenance Simple construction and installation on new or existing foundation Excellent operational features in ice conditions Safe deflation under any conditions
Rubber roll We always strive to provide excellent product quality. We provide service after sales.
Rubber gloves with orange lining inside, chemical resisirant Per pair
Rubber rings is : 5382 Rubber rings is : 5382
For medium/low pressure hydraulic oil, air, water transportation Product Description Noise insulation Sheet better known as Sound deadner or floor silencer is a composite Material based on asphalt fillers and small Quantity of polymer as binder used in the Automotive interior floor for controlling Noise Vibration and Harshness Application Used on the cab floor, tunnel, door, pannel Lower deskboard, vertical surface or over Hanging parts of vehicle like passenger car Commercials & utility vehicle and tractor Form of Supply Size as per dimensional requirement Typical Physical Properties Color : Black Thickness : 1.5-3.0 mm Sp. Gr. : 1.4-1.8 Evaporation loss 30 (minutes)/150¦ C : 1% Max. Heat Flow : No break due to Sagging Adhesion Strength : 5.0 Kg/cm2 (mm) Sound Atenuation : 8-17 db/sec. Smoke temp. : Above 150¦ C Thermal fusion weldability : 50% and above Bondability - 20¦ C / 5¦ C : No crack Dropping : No Sag crack Cold impact resistance - 20¦ C / 5¦ C : No crack or peeling Coefficient of damping : 0.08 and above Over heating - 90¦ angle : No mark, peeling, falling Tensile shear strength : 0.2-0/Kg cm2 (min) Impact resistance - 20¦ C / 5¦ C : 35 or more Corrosion resistance : No corrosion Shrinkage : < 2%
Product Description URI Butyl Vibro dampner are elastic, Non-curing and self adhesive compound for vibration dampening, sound proofing and heat insulation. Product Feature Retention of tack for indefinite period Highly flexible, outstanding age & weather resistance and resistance to hardening Very good chemical and thermal stabilty Vibration & sound dampening characteristics high durability, low vapour transmission rate and non-fogging characteristics No corrosion on metal like Copper, Mild steel, Aluminium Easy to apply Typical Physical Properties Color : Black/Grey Sp. Gr. : 1.1-2.6 Adhesion Strength : >0.4 Kg/Cm2 Tensile Strength : 0.7-1.2 Kg/Cm2 Stretch : >100% Corrosion resistance on CU tube at 80 C for 168 hrs : No discolouration Weather resistance : No peeling at sticking Part Water absorption : 1% Peeling property of release paper : Easily peelable Errosion resistance on AL, CU : No Change Solidity : >98% Heat proof at 100 C for 72 hrs : No Peeling or crack Odor : No unconformable odor Frost resistance (-5 to 100 C) : No Crack Physical Form : backing
PRODUCT FEATURES Flexible Expansion Rubber bellows are used to make an end-to-end join between two ducts of the same size. Provides a good airtight seal to prohibit intake of air, humidity or dust inside joined units. Prevent access to high-voltage conductors. Withstand high internal pressure. Ensure electrical insulation between units. Allow for relative axial movement. Prevent transmission of vibrations of electrical equipment like generators etc. to the bus duct. Take care of thermal expansion and contraction of the bus duct enclosures. Provide enhanced fitment tolerance during installation of the bus duct Product Type : Rectangular Rubber Bellows with Flange
Product Features of Rubber Expansion Joint To provide stress relief in ducting system by absorbing any difference in dimension caused by thermal change. To protect equipment by reducing equipment vibration. To provide simple connection of misaligned pipes. Accommodate expansion and contraction movement in axial, lateral and angular direction. Prevent the propagation of electricity Dampen sound transmission Materials Rubber : Neoprene, Nitrile, EPDM, Natural, Butyl, Hypalon, Silicone, SBR, Flurocarbon rubber Fabrics : Canvas, Rayan, Polyester, Nylon, Glass Fabric Metal Flanges : Stainless Steel, MS, Aluminium Type, Size and Pressure Rating Type : Single arch type, multi arch type, sleeve, Joint type, Enlarge Flange type, wide arch type. Size : 50 to 3000 mm Pressure (base on dia) : Upto 25 kg/cm2 Permissible movement : Axial (compression) - upto 200 mm Axial (elongation) - upto 75 mm Transverse - upto 75 mm Face to Face length : 50 to 700 mm
