Material Properties Styrene butadiene Rubber latex is a kind of high-polymer dispersion emulsion polymerized by butadiene, and styrene, etc. through advanced techniques. As a white thick emulsion in appearance, it has good viscosity. It is one of the popular raw materials in tyre-dipping fabric industry, because of its good intermiscibility with VP latex for fabric dipping. Typical properties Product Styrene butadiene Rubber latex (SBR latex) Execution Standards: Q/320205 GLFF01-2010 Item Standard Solid Content, % 50.0±1 Viscosity, mP25-35 pH Value(25ºC) 10-11 Density,g/cm3(20ºC) 0.98-0.99 Mechanical Stability, %5 Chemical Stability, %0.33 Application It is suitable for the dipping of tyre cord fabric, and industrial fabric etc.. Storage&Package 1.Avoid from rain, snow or strong sunlight. Temperature: 1~40°C. 2.200L Drum, 1000L IBC. 3.Keep in dry, cool, non-aggressive gas warehouse, and avoid strong sunlight, remote from fire and thermal resource at 1~40°C, 6 months shelf life, a little decrease of PH value.
Material Properties Anionic aqueous dispersion of a butadiene-styrene-2-vinylpyridine terpolymer with low foaming properties. Typical properties Appearance White Emulsion Total Solids, %40 PH10.0 Brookfield Viscosity, mPa?¢s 20-45 Surface Tension, mN/m 40-55 Mooney Viscosity, ML1+420 Foam hight 160 Mechanical Stability Excellent Freeze-thaw Stability good Application Tyre fabrics: carcass and belt, chater and other textile components used in tyres. Industrial rubber products: conveyor belt, V belts, hoses and other textile reinforced products. The combination of small particle size and narrow particle size distribution , together with excellent processing properties, ensure the optimum adhesion performance demanded by even the most stringent applications, such as tyre. Storage&Package 1.Avoid from rain, snow or strong sunlight. Temperature: 1~40°C. 2.200L Drum, 1000L IBC, and Bulk(tank truck, flexitank, rail tank car). 3.Keep in dry, cool, non-aggressive gas warehouse, and avoid strong sunlight, remote from fire and thermal resource at 1~40°C.
Material Properties This SB Latexis suitable for the preparation of cationic modified emulsified asphalt, and the cationic emulsified asphalt has good compatibility. Can significantly improve the asphalt softening point, low temperature ductility, toughness and tenacity and durability of use. Methods of using and recommended dosage Styrene butadiene latex and cationic emulsified (SB Latex)bitumen directly reconcile, by simply mixing can be made of modified emulsified asphalt. Amount is generally 2% - 5% ( dry basis ), a sticky layer oil generally use lower, the micro table place with cap; waterproof modified emulsion asphalt is generally 10% - 20% ( dry basis ). Typical properties Project kzw-R65 Appearance milky white liquid Contentï¼?% 65±1 Solubility in water miscible pH 5±0.5 Application 1.This SB Latex is widely used in high grade road surface, bridge and road engineering of micro table place, slurry seal, sticky oil layer modified asphalt and roofing, underground cavern, waterproof, moisture-proof waterproof engineering. 2.This SB Latex is mainly used for Bitumen&Cement.
Panama Petrochem Ltd, manufactures Rubber Process Oils which are widely used across various industries and are popular as safe and environment friendly products. Different grades of superior quality Rubber Process Oils are offered which are used for the manufacturing of various rubber produces, from both natural as well as synthetic rubber. Under the brand name Panol, 3 Grades are offered namely, PANOL C 160-A – (Aromatic Base) PANOL C 160-P – (Paraffinic Base) PANOL C 160-N – (Naphthenic Base) Also, Speciality Rubber Process Oils meeting European Regulation for non-carcinogenic oils, Mild Extracted Solvent (MES), Residual Aromatic Extracted Solvent (RAE) and Treated Distillate Aromatic Extracted Solvent (TDAE), are offered on request. PANOL C 160-A Panol C 160-A is an Aromatic type of Rubber Processing Oil, formulated from specially selected aromatic furfural extracts with higher aromatic content. It is available with different viscosities as required for different applications. High rubber and polymer solvency Widely used in the manufacturing of automotive tyres and tubes, bi-cycle tyres, tyres retreading materials, belting, hoses, battery containers, extruded products and technical moulded goods Highly suitable for Natural Rubber, Styrene Butadiene Rubber, Polybutadiene Rubber and Neoprene Rubbers Offers good compatibly and is suitable for use with Natural Rubber, SBR, PBR, CR etc. PANOL C 160-P Panol C 160-P are Paraffinic type Rubber Processing / Extender Oils formulated from highly refined solvent extracted base stocks of low sulphur content. These oils are used in the manufacturing of butyl tubes and a variety of technical moulded and extruded products based on polar rubbers like EPM & EPDM etc. They have good thermal stability and are suitable in the manufacture of light coloured products and because of their high paraffinic content and viscosity, these oils are preferred for achieving high retention of properties after ageing and higher loading of oil They are used for heat resistant conveyor belts and steam hoses PANOL C 160-N Panol C 160-N serws grades are Napthenic type Rubber Processing / Extender Oils formulated from carefully selected Hydrotreated Napthenic base stocks. These are non-staining in nature and posses excellent thermal, oxidation and colour stability They are recommended in the manufacture of automotive tubes, light coloured non-back footwear products and also moulded and extruded goods They are compatible for processing with NR, SBR, PBR, Butyl and EPDM rubbers Special tailor-made blends are also available for TPR and other specific applications SPECIALITY RUBBER PROCESS OILS We manufacture and offer Speciality Rubber Process Oils meeting European Regulation for non carcinogenic oils. We have a wide range of Mild Extracted Solvent (MES), Residual Aromatic Extracted Solvent (RAE) and Treated Distillate Aromatic Extracted Solvent (TDAE).
Lithium ore methane (natural gas) flour sugar medical devices scrap metal plastic derivatives rubber products.Welcome to savanas e enseadas, your premier partner for seamless global procurement and export services. specializing in sourcing and delivering top notch goods from europe, we pride ourselves on providing efficient, tailored solutions for businesses worldwide. let us navigate the complexities of international trade for you, ensuring a hassle free experience from procurement to export. elevate your business with us, your gateway to quality european products.
Rubber compound, rubber mouldings, rubber extrusion.Technical consultancy, physical and chemical testing, industrial advice, tooling
Rubber compound and rubber scrap.
Rubber compound and rubber scrap.
Natural rubber latex ha 60% drc, rubber latex ha la, rss1,rss3, svr3l and svrcv50_60..Manufacturer, producing and exporting
Ingredients to rubber formulations, raw materials to rubber formulations.
Technically Specified Natural Rubber 10 (TSNR10) from Indonesia (SIR10). Company: Sinar Jaya Producer code: DAX Capacity: 500MT monthly
Technically Specified Natural Rubber 20 (TSNR20) from Indonesia (SIR20). Company: Sinar Jaya Producer code: DAX Capacity: 500MT monthly
Nylon friction scrap from tyre plants. B/C/D Rubber Compound
Chemical Name: 2-Mercapto benzimidazole Molecular Formula:C7H6N2S Molecular Weight: 150.19 CAS NO: 583-39-1
Chemical Name: Tetramethyl thiuram disulfide Molecular Formula: C6H12N2S4 Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in alcohol, diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be sensitive to skin and peogaster Application: Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of polychloroprene rubber with ETU and also be used as bactericide and pesticide Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Chemical Name: N-Tertiarybutyl-2-benzothiazole sulfenamide Molecular Formula:C11H14N2S2 Molecular Weight:238.37 Quality standrad:HG/T2744-96 CAS NO:95-31-8 Properties: Gray white powder (granule). The density is 1.26-1.32. soluble in benzene, CS2, methyl alcohol, acetone. chloroform, alcohol, insoluble in gasoline, water, acid and alkali with lower concentration Application: Provides fast cure rate and high modulus development in NR, SBR, BR and blends. Normally used alone or with small quantities of ultra accelerators in tire compounds or industrial rubber products low poison and high efficiency. It is good back up for NOBS. Be regarded as standard accelerator Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
Chemical Name:N-Cyclohexyl-2-benzothiazole sulfenamide Molecular Formula:C13H16N2S2 Molecular Weight:264.4 CAS NO:95-33-0 Properties: Gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. Soluble in benzene,boluene, chloroform, CS2, CH2Cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water,gasoline, acid / alkali with lower concentration. Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone when activated by DPG, TMTD and TS. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
Chemical Name:2-Mercaptobenzothiazole Molecular Formula: C7H5NS2 Modular Weight: 167.25 CAS NO: 149-30-4 Properties: Slightly foul odor and bitter taste, nonpoisonous. Specific gravity: 1.46-1.52.Soluble in ethyl acetone, acetone, dilute solution of sodium hydroxide and sodium carbonate, ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline. Application: Used for NR, IR, SBR, NBR, HR and EPDM.One of the mainly used acidic accelerators currontly and a medium fast primary accelerator. Imparts excellent aging properties, when used both alone and in combination with DM,TMTD and many others, mainly basic accelerators for higher activity. But care should be taken because it has a slight tendency to scorch. Unsuitable for use in the manufacture of food contact materials. Mainly used in the manufacture of tires, tubes, footwear, rubber belts and hoses etc. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging:25kg bag.
Chemical Name: Dibenzothiazole disulfide Molecular Formula:C14H8N2S4 Properties: A little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than MBT. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging: 25kg bag.
Description OF-7 is a polymeric alkyl phenol disulfide, contains unique sulfur donors in the molecular structure, can vulcanize rubber in heated state, � typically used as nitrosamine-free environment-friendly sulfur donating body in the rubber compound formulations, can give excellent mechanical properties, heat aging resistance, excellent dynamic fatigue properties and good operational safety performance. Application OF-7� contains unique sulfur donors, can� vulcanize rubber in heated state, giving non-blooming, high tensile strength, excellent heat resistance and dynamic fatigue properties, used� as� sulfur donor type vulcanizing agent� for NR/SR. For the co-vulcanization� of different polar rubber, such as NR, CIIR, IIR and EPDM, it provides excellent performance. Can be used in tires, gaskets, belts, automotive hose, damping products.� Because containing� alkylphenol� groups,� it has� also excellent tackifying and antioxidant effects. Not producing� nitrosamines toxic gas� during vulcanization, it is an environmentally friendly additive. Reference dosage 0.5-5 phr. Package and Storage In paper/plastic combined sack with inner film bag, 25 kg net each. Store indoor, drying and ventilating, shelf-life 18 months.
