Loader with grapple pitchfork Features specifications: zl-10 grasps the pitchfork Zl-10 grasps the pitchfork 1. Using direct injection diesel engine as power, with easy startup and low oil consumption 2. Using special drive axle, with strong ability to overcome obstacle 3. Chassis uses hinged structure, with small turning radius and flexible turning, which applies to the operation in narrow space 4. This machine uses hydraulic operation, with simple structure, convenient operation, good performance and reliable quality 5. Widely applying to the construction of agricultural engineering and small and medium building such as road, coal mine, brickyard, urban construction, kiln factory, stone material factory, prefabricated cement parts factory, etc. Cbu
Bulldozer cutting edge Specializing in all kinds of cutting edges and end bits for bulldozers and motor graders, which are applicable for komatsu and caterpillar. Available models: d20, d30, d31, d40, d50, d58, d60, d65, d80, d85, d135, d155, d275, d355, d375, d475, d4, d5, d6, d7, d8, d9, d10 Please send us the oem part numbers, we will check and quote you our prices asap. Wooden pallet
Used road roller bomag dynapac Bomag 219 d-2 Dynapac ca25, ca30 Container
Rated Loading weight: 1000kg Rated Bucket Capacity: 0.5m3 Operating weight: 2880KG Tread: 1320mm Wheel Base: 2040mm Min. Turning Radius: 4200mm Min. Ground Clearance: 240mm Dump Clearance: 2545mm Dump Reach: 900mm Lifting time of Bucket: 3.05s Max. Breakout Force: 32kn Overall Dimension: 4900X1685X2520(mm) Model of Engine: ZN485Q Type: turbulent, water-cooled, in-line, four strokes, four cylinders Bore & stroke (mm): 85x98 Rated power & speed (kw/r/min): 26/2200 Displacement (L): 2.156 Net weight (kg): 205 Overall dimensions (mm): 696x492x650 Operating weight: 2880KG Overall Dimension: 4900X1685X2520(mm)
Rated Loading weight: 1200kg Rated Bucket Capacity: 0.6m3 Operating weight: 3100KG Tread: 1400mm Wheel Base: 2005mm Min. Turning Radius: 4500mm Min. Ground Clearance: 260mm Dump Clearance: 2650mm Dump Reach: 1020mm Lifting time of Bucket: 4s Max. Breakout Force: 36kn Overall Dimension: 4800X1730X2720(mm) Engine Model: Changchai 4L68 Type: direct injection, water-cooled, in-line, four strokes, four cylinders Bore & stroke (mm): 95x100 Rated power & speed (kw/r/min): 37/2200 Displacement (L): 2.83 Net weight (kg): 250 Overall dimensions (mm): 696x492x650 Operating weight: 3100KG Overall Dimension: 4800X1730X2720(mm)
1. Rated Load: 1600kg 2. Rated Bucket Capacity: 0.9m3 3. Tread: 1440mm 4. Wheel Base: 2150mm 5. Min. Turning Radius: 4367mm 6. Max. Unloading Height: 2330mm 7. Unloading Distance at Max. Unloading Height: 800mm 8. Lifting time of Bucket (load): 4.8s 9. Max. Breakout Force: 51kn 10. Max. Tractive Force: 3450kgf 11. Max. gradeability: 30íp 12. Min. ground-clearance: 310mm 13. Overall Weight: 4870kg 14. Overall Dimension: 5182X1910X2712(mm) Engine: 1. Model of Engine: ZH4100K14-3 2. Type: In-line, Water-cooled, Four stroke, Direct injection 3. Rated Output of Engine: 45kw 4. Rated Speed of Engine: 2400rpm 5. Fuel consumption: í_243g/kw.h 6. Max. Torque: 250Nm Overall Weight: 4870kg Overall Dimension: 5182X1910X2712(mm)
Rated Loading weight: 1000kg Rated Bucket Capacity: 0.5m3 Operating weight: 2700KG Tread: 1320mm Wheel Base: 1940mm Min. Turning Radius: 4700mm Min. Ground Clearance: 230mm Dump Clearance: 2350mm Dump Reach: 800mm Lifting time of Bucket: 4s Max. Breakout Force: 32kn Overall Dimension: 4750X1600X2530(mm) Engine Model: Changchai ZN390Q Type: direct injection, water-cooled, in-line, four strokes, three cylinders Bore & stroke (mm): 90x95 Rated power & speed (kw/r/min): 20/2200 Displacement (L): 1.813 Net weight (kg): 190 Overall dimensions (mm): 614x492x628 Overall Dimension: 4750X1600X2530(mm) Operating weight: 2700KG
Model :wb7201 load:160 weight:10.5 watercapacity:78 sand capacity:5 wheel: 13úóíß3úóa L:1440 hú¦476 c :550 aú¦895 b:642 h :298 In bulk
Road roller
Wheel bulldozer
Bulldozer Manufactured year : 1981 With Ripper
Road roller Model no. Description Yz14jyz16jw1806dw2005dw Weight kg14000160001730020000
Komatsu dozar Komatsu dozer d85a-12 s/n 11970 Model 1975
Dynapac vib roller ca302 Engine: cummins b3, 9-c, 4 cyl, 125 hp, water cooled S/n.68220657 Year: 2000 Hours:3958 Cab:yes A/c:no Rop:syes Tyres:trelleborg / alliance 23, 1 v 26left: 50% right: 30% Drum width:2150 mm Static linear load: 38 kg/cm Operation weight:12450 kg Measurement: Length:5, 50 m Width:2, 39 m Height:2, 92 m Shipping volume: 38 m3 Shipping volume: 38 m3 , roro vessel or in container standard lot size
Backhoe Loader Machine
Adopt an off-road vehicle four-wheel drive system of Automotive continuously variable transmission training bench One, five manual variable speed (with clutch assembly, clutch control mechanism, etc.); Two, transfer box assembly (with shift mechanism) 3. Rear drive shaft assembly, rear drive axle assembly (including rear axle housing, main reducer, differential speed device, left and right rear drive half shaft, left and right rear brake assembly, etc.); Four, front drive shaft assembly, front drive axle assembly (including rear axle housing, main reducer, differential speed device, left and right rear drive half shaft, left and right rear brake assembly, etc.); Five, auxiliary devices (reducer motor, reducer, leakage protection device, mobile platform, etc.) I. Automotive continuously variable transmission training bench function: The four-wheel drive drive system is arranged according to the position of the original car and reasonably connected through the mobile platform. 1, large area deep anatomy manual transmission and clutch, transfer box, front and rear drive axle, brake, different parts with different colors Logo, intuitive embodiment of manual transmission and clutch, transfer box, front and rear drive axle, brake and other external and internal structure and composition Relationship (each moving part is clearly visible); 2, intuitive embodiment: the structure and working principle of the four-wheel drive drive system of the car. Two, dynamic demonstration function: Driven by a reducer, the speed of the input shaft is 10~15 RPM.Operate the working process of the four-wheel drive drive system and demonstrate the working principle of the four-wheel drive drive system. 1, the actual dynamic demonstration clutch and shift operation, can easily change each gear, fully reflect the transmission line and manual transmission The running state of each gear; 2, the actual dynamic demonstration of the operation of the transfer box, can easily change the driving mode, fully reflect the transmission line and drive mode operation of the transfer box State; 3. Demonstrate the working condition of the Automotive continuously variable transmission training bench and the working principle of the universal joint; 4, dynamic demonstration of reducer and differential working process and working principle; 5. Dynamic demonstration of brake working process and working principle; Reasonable industrial modeling, comprehensive safety protection, equipped with mobile casters, with beautiful and generous, high safety factor, convenient and so on.
60m3 Loading Capacity Wheel Belt Type Mining Muck Loader Product Description The multifunctional mine muck machine is a new type of loader developed to improve labor intensity and work efficiency. The machine can directly transport rocks to the conveyor belt. The machine adopts full hydraulic control mode, which is simple and convenient to operate. The gantry frame of the machine is detachable and non-cut, which is convenient for installation in the well. In addition, the height of the rear unloading can be adjusted according to the customer's own needs. The machine is equipped with an adventure device to solve the danger of manual exploration. This machine can be used in a cave below 2.2 meters, and the loading capacity per hour is between 40-60m. Application Mine slag raking machine is mainly used for phosphate ore, aluminum ore, iron ore, copper ore, , silver ore, lead-zinc ore and other mines, hydropower, tunnel projects in narrow-space mining operations. And transportation, construction and loading. The mining slag raking machine is a combination of a manipulator and a conveyor. The slagging and conveying and loading functions are combined into one. The production device adopts an electric full hydraulic control system. It has the characteristics of safety, environmental protection, low energy consumption, and high efficiency. It is an indispensable advanced mining equipment for mining enterprises and a substitute for labor and other machinery. Specification Model : ZWY60 Loading capacity m3/h : 60 Weight kg : 3100 Digging width mm : 3000 Digging height mm : 2150 Digging depth mm : 500 Digging distance mm : 1400 Gradeability : 5 Unloading height mm : 1300 Can be heightened Unloading distance mm : 1500 Can be lengthened Minimum turning radius 5 Power kw : 11 Walking speed km/h : 1.45 Maximum passing size of material mm : 600 450 Wheelbase mm : 1480 Wheel distance mm : 1180 Adaptation dimensions m : 2.2 2.2 Product dimensions mm : 5500 1550 1650
Product presentation Product model: 4yzb-3 Engine power(KW):98/99.3 Dimension(mm):7580*2335*3450 Structural quality(kg):5420 Working number of rows:2 Rows width(mm)520-650 Working width(mm):1900 Max height of harvestï¼?mmï¼?:1885 Working speed(km/h):2 â?? 5 Hourly productivity(hm�²/h):0.3-0.7 Gear box type: Mechanical gearbox + stepless speed change Tread(Guide wheel/ Drive wheel)mm:1560/1600 Collecting tank measurement(m�³):2.4 Grain loss rate:â?¤2% Bract exfoliation rateï¼?â?¥90% Grain broken rate: â?¤1% Tractor advantages: 1. The corn harvest tractor gearbox shell and rear axle shell are self-produced by the group company, the material is qt500-7, the quality is stable, the tensile strength is other manufacturers (other manufacturers are mostly HT250) more than twice. 2. The bearing adopts the well-known trademark of China -- human bearing. 3. The clutch adopts domestic and foreign first-tier suppliers such as "Luke" and "yellow sea". 4. Gears and axles are supplied by professional manufacturers such as Haitian and minghua. 5. Gear box oil, hydraulic oil, diesel oil and other oil products are all used kunlun lubricating oil. 6. The company is equipped with a special three-package service vehicle to provide timely service
The electric rock loader is a rock loading machine with a single bucket, front loading and rear unloading, and walking on the track. Its purpose is to load the rock or ore from the blasting caving into the mine cart behind. The range of loaded materials is very wide, such as: gold, non-ferrous metals, black metals, non-metals and other ores and rocks. The maximum diameter of the loaded material can be up to 500mm, and the highest efficiency is when the diameter is below 250mm. This machine is a non-explosion-proof product, and it is strictly prohibited to use it in an environment with flammable and explosive gases such as gas. Model: ZQ-26 Loading capacity m3/h: 40-50 Loading area m3: 0.26 Loading width m: 2.7 Track gauge mm: 500,600,762 or 900 Power kw: wind motor Walking power kw: 10.5 Lifting bucket power kw:15 Unloading height mm: 1250 Dimension mm Length : 2440 Width: 1380 Height: 1500 Weight kg: 2700
DELCO 95HP BACKHOE LOADER 6 IN 1 BUCKET 4X4 DRIVE TORQUE: 300NM 1500 +100RPM MAX DIG DEPTH: 4.80M MAX LOAD OVER HEIGHT: 4.39M BUCKET BREAKOUT FORCE : 6425 KGF LOADER BUCKET CAPACITY : 1.2CUM ENGINE : powerful proven and fuel efficient Koel 4r1040tc,water cooled Diesel engine.
