Shield tail grease is a uniform paste made with grease as the main agent and adding fiber, tackifier, filler and other additives. It mainly plays the functions of sealing, waterproofing, lubrication and anti-corrosion. Shield tail grease is divided into two types: hand-applied grease and pumped grease. Hand-applied grease is used during the launch, and pumped grease is used during the propulsion process.
Application:
1. Good adhesion;
2. Good water resistance;
3. Good water tightness;
4. It has good pumpability in a wide temperature range.
Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs.
Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Synthetic technology motor oil specially designed for modern high performance engine with gasoline direct injection (GDI and Turbo-GDI) systems. Developed by latest evolution technology platform EVOTEC fortified with SMART Molecules that improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding low friction and heat resistance enhance acceleration response, wear prevention and maintaining engine power for better drivability in all situations.
APPLICATION
Designed for high performance gasoline engine both GDI and Turbo-GDI.
Recommended for passenger car, sport car and SUV equipped with start-stop system.
Suitable for all port fuel injection (PFI) gasoline engines running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85).
KEY FEATURES
Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules.
Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance.
Outstanding low oil friction with high heat resistance by EVOTEC technology for superior acceleration responsiveness and reduced oil consumption.
Better oil degradation resistance and engine sludge prevention through oil drain intervals.
Product Properties for AdBlue as per the revised ISO22241 standard.
Urea 32,5 % (approximate) solution dissolved within deionised water. As required by SCR equipped vehicles under the provisions of Emissions standards Euro IV (Euro4), Euro V (Euro5) & Euro VI (Euro6).
Urea Content 31.8 33.2 % by weight
Density at 20C 1.0870 1.0930 g/cm
Refracting Index at 20C 1.3814 1.3843
Alkalinity as NH3 0.2 %
Biuret 0.3 %
Aldehyde 5 mg/kg
Insolubles 20 mg/kg
Phosphate (PO4) 0.5 mg/kg
Calcium 0.5 mg/kg
Iron 0.5 mg/kg
Copper 0.2 mg/kg
Zinc 0.2 mg/kg
Chromium 0.2 mg/kg
Nickel 0.2 mg/kg
Aluminium 0.5 mg/kg
Magnesium 0.5 mg/kg
Sodium 0.5 mg/kg
Potassium 0.5 mg/kg
ETRO 4+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydro-treatment - and wax isomerization process and hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship.
Applications:
ETRO 4+ is the preferred choice for formulating cost effective, high-performance, low-viscosity engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines.
Features and Benefits:
Very high viscosity index
Excellent volatility for low-viscosity engine oils
Superior low-temperature performance
Good oxidation stability
Formulation Support:
ETRO 4+ is supported with top-tier engine oil formulations that meet the requirements for:
API SN
ILSAC GF-5
ACEA 2012*
OEM Specifications
ETRO 6+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydrotreatment and wax isomerization process and is hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low temperature performance. It has an excellent viscosity-volatility relationship.
Applications:
ETRO 6+ is an excellent choice for formulating cost effective, high performance, low-viscosity
engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for
application in industrial equipment, such as compressors, hydraulic systems, gears and turbines.
Features and Benefits:
Very high viscosity index
Excellent volatility for low viscosity engine oils
Superior low temperature performance
Good oxidation stability
Formulation Support:
ETRO 6+ is supported with top-tier engine oil formulations that meet the requirements for:
API SN
ILSAC GF-5
ACEA 2012*
OEM Specifications
2018 Lubricants Suppliers
Short on time? Let Lubricants sellers contact you.