Polish Executive Cabins Suppliers and Manufacturers

Antique, fine art, paintings, artwork, fragile items, antique furniture, sofa, large furniture, bed, small furniture, couch, table, desk, office chair .Shipping

Furniture like tables and beach, pool furniture, beach furniture, furniture, pool furniture, tables.

Furniture like coffee tables, chairs and stools.

Tanning vertical cabines.

Air Filter, Cabin filter, Oil Filter, Fuel filter, Pollen Filter, Carbon cabin filter.

Passenger lifts(Passenger elevetors) The lift is ideal for retrofit within existing buildings with min. Adjustment on site elf-supporting steel structure minimum headroom Pit 350 mm instead of 1300 mm Pre-installed cabin and drive unit Easy installation Controller with micro-processor plug-in system Complete drive unit in headroom (no separate machine room necessary) Iso-pm 225 Capacity: 3 persons (225 kg) The passenger lift iso-pm 225 has a fixed cabin floor of 0, 75 x 0, 97 m and a door height of 2, 00 m. Iso-pa 300 Capacity: 4 persons (300 kg) The passenger lift iso-pa 300 has a fixed cabin floor of 0, 965 x 0, 99 m and a door height of 2, 00 m. Technical information

Passenger Lifts The lift is ideal for retrofit within existing buildings with min. adjustment on site self-supporting steel structure minimum headroom pit 350 mm instead of 1300 mm pre-installed cabin and drive unit easy installation controller with micro-processor plug-in system complete drive unit in headroom (no separate machine room necessary) Technical information The information given below lists main features of our passenger lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles with guides T 70 x 65 x 9 Buffer 80/80 Cabin Cant-off system made of galvanized steel, adjustable guides shoes on two sides + emergency guiding Compensation device on suspension chain floor PVC covered Cabin light (flush installation) - Cabin ventilation Cabin push button station - emergency call - emergency light - emergency telephone call pre-installed Governor operated safety, type tested Special cabin apron (registered design application) Hinged doors ISO-PM 225 manual operated hinged doors, made of primed painted steel, window in Aluminium frame incl. door frame, Call button with stainless steel cover type tested door lock with fail safety lock Door closer - installed covered Horizontal sliding doors ISO-PA 300 powered horizontal sliding doors made of primed painted steel incl. door frame, cover panel, Call button with stainless steel cover type tested door lock with fail safety lock Machine room door double hinged door galvanized with sash lock with side frames made of galvanized steel Drive unit Drive unit with standard motor IP 54 and factory-made oil-filling, double disc brake and hand wheel, 3 x 400 V 50 Hz. chain wheels for chains 5/8 x 3/8" Controller Microprocessor in controller cabinet Installation pre-installed and plug-in system Floor selector (impulse driven)

Goods lifts ISO-MAX Capacity: 300 / 500 / 750 / 1000 kg The ISO-MAX is a goods only lift with two fixed cabin areas of 1,00 x 1,40 m (capacity 300, 500, 750 and 1000 kg) or 1,275 x 1,50 m (Capacity 750 and 1000 kg) and a variable cabin height from 1,20 - 2,00 m Lift unit complies to EU-Directive for machines and has a EU-Declaration of conformity of German T_V Hanover / Sachsen-Anhalt e.V. Compared to a similar hydraulic freight elevator the ISO-MAX will offer you some significant advantages and savings: corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Machine room door double hinged door with sash lock with side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller call and send control with 24 V, safety circuit 230 V pre-wired with plugs adjustable and time-limited despatch delay device (1-5 s) electronic overload contact acoustic arrival signal position indicator on each entrance thermal motor protection as main switch pre-wired on control panel machine room light with socket ISO-PM 1000 Capacity: 1000 kg Goods lift along directive 95/28/EG with max. 2 persons corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only cabin push button with send control - landing push buttons with call and send control machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) reducing of interference prone by setting a safety feature instead of cabin door space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffet 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides safety light curtain cabin light - cabin ventilation type tested safety gear special pushbuttons in cabin - emergency call - emergency light - prepared for outgoing emergency call special safety gear (type tested) special cabin apron (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Maintenance room door hinged door with sash lock with side frames made of galvanized steel Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V / 50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control Cabin push button with send control Landing push buttons with call and send control Micro-processor technique in controller cabinet Selector with absolute encoder

We make equipment for hydrotherapy (whirl pool water massage tubs, jet shower cabins, hydromassage units), heat therapy (mud and fango paraffin heaters/warmers), kinesitherapy (massage couches, tables etc, body-sculpting powered exercise beds), medical furniture (diagnostic couches, screens, trolleys, gynaecology and urology chairs, commode chairs), ICU relative equipment (meden 2000) and many others. Palletised, boxed

Service lifts (service elevators) Product range Lifts for utilization in restaurants, hotels, hospitals and private homes. We offer 4 different types of service lifts for different applications: Parting doors at serving height (iso-a) Bi-parting doors at floor level (iso-c) Hinged doors at floor level (iso-d) Cabin with 2 separate compartments (iso-z)Our strengths In recent years we have become a market leader by focussing high-tech and on quality.Low costs Galvanized construction Short delivery and installation times Pre-assembled plug-in controllers Installation

Goods lifts The iso-max is a goods only lift with two fixed cabin areas of 1, 00 x 1, 40 m (capacity 300, 500, 750 and 1000 kg) or 1, 275 x 1, 50 m (capacity 750 and 1000 kg) and a variable cabin height from 1, 20 - 2, 00 m. Lift unit complies to eu-directive for machines and has a eu-declaration of conformity of german t_v hanover / sachsen-anhalt e.V. Compared to a similar hydraulic freight elevator the iso-max will offer you some significant advantages and savings: Corrosion-proof Self-supporting galvanized steel structure Shaft pit depth 270 mm only Machine room less lift Accessible spaces underneath the shaft possible Easy mounting steel shaft cladding deliverable (no fire protection) Space saving installation - compact construction Pre-assembled for easy installation No brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors Manual operated hinged doors, made of galvanized steel in accordance to din 18090, production controlled by t_v-authorities With side frames made of galvanized steel according to drawing Door locks type-tested by t_v-authorities Machine room door Double hinged door with sash lock With side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor ip 54 disc brake and hand wheel, 3 x 400 v /50 hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control with 24 v, safety circuit 230 v Pre-wired with plugs Adjustable and time-limited despatch delay device (1-5 s) Electronic overload contact Acoustic arrival signal Position indicator on each entrance Thermal motor protection as main switch pre-wired on control panel Machine room light with socket

Automatic lift Beside our standard service lifts we also offer semi-automatic or automatic Tote-Box-Systems. The basic system and components are similar to the per-assembled construction of our service lifts. The automatic lift includes vertical bi-painting doors with 24 V motor, to open and close the door automatically, independent of the cabin doors. In the car a driven belt device will draw into and eject from the cabin the tote boxes. In front of each landing is a load- and unload- roller conveyor to carry 2 or 3 boxes and code lines at each box for easy pre-setting. Structure self supporting and free standing steel structure made of cold rolled galvanised profiles, pre-mounted in 2 m - sections with trunking and t-guides Lift machine (made in Germany)on top of the shaft, with hardened twin groove sheave, speed 0,40 m sec. The machine is mounted on steel beams, having a high quality reduction gear, magnetic disc brake and hand wheel, protection class IP 54, power supply 400 V 50 Hz, three phase. Speed 0,8 - 1 m sec or frequency control upon request. Controller High security through transformer and 24 volt system, pluggable and pre-wired. SPS (computer programmable) control system compressed equipment in a lockable controller box. Each project will be prepared to the clients requirements. System Each landing door has its own 24 Volt motor to open and close the door automatically independent of the cabin door. In the car a driven belt device will draw into and eject from the cabin our standard tote boxes. In front of each landing is a load and unload roller conveyor to carry 2 resp. 3 boxes. There are photocells in the lift car to read the destination of the box. Our standard tote box is made of heavy duty polypropylene for smooth running, size 400 x 600 x 300 mm. Each box has a slider to set the festinated floor marking easily. The roller conveyors have PVC-rollers. The frame work is made of folded galvanised steel profiles in "office design". The photocells and switches are well protected in the frames. Operation mode Set the slider at the box for the designated floor and put the box on the upper roller conveyor. This conveyor has an automatic device to keep the first box away from the landing door and also to keep the second box away from the first. The computer will notify that there is a box waiting and will send the car to pick it up. The door opens automatically after arrival and the belt will draw the box into the car. Photocells read the destination. Door closes automatically and car delivers the box to the floor indicated on the slider. After opening the landing door, the belt ejects the box to the unloading conveyor. Complete automatic operation will be carried out without human assistance or recall. Options Capacity of 100 or 200 kg, Car and doors in stainless steel, Speed 0,8 m - 1,o - 3 m/sec, Travel up to 150 m

Service lifts Product Range Lifts for utilization in restaurants, hotels, hospitals and private homes. We offer 4 different types of service lifts for different applications: parting doors at serving height (ISO-A) Bi-parting doors at floor level (ISO-C) Hinged doors at floor level (ISO-D) Cabin with 2 separate compartments (ISO-Z) Our strengths In recent years we have become a market leader by focussing high-tech and on quality. low costs galvanized construction short delivery and installation times pre-assembled plug-in controllers Installation 90 % of our service lifts are made from pre-installed components. Therefore the installation times are reduced on site by 50 %. Thanks to a ingenious method of construction our service lifts can be used for almost any purpose and can be made according to your specification. Technical Information The information given below lists main features of our service lifts. As there are over 160 options available, please do not hesitate to contact us for further details. Structure Self supporting steel structure, made of cold rolled special profiles, fully galvanized, pre-assembled in 2 m sections including trunking.

Description of building system: Building costs of typical individual house is about 40% cheaper than another popular in eu systems; Small costs of investment, production and working power the execution of buildings in system r; Costs of air conditioning for typical house is about 5 times cheaper than another popular in eu systems; Costs of heating for typical house is about 5 times cheaper than another popular in eu building systems; System r possesses indispensable certificates and it fulfils all valid in eu building norms: - stamina norms - resistance on moisture - protecting before noise - protecting before fire - hygienic norms - norm of waste of energy - large range of recycling Coefficient of heat infiltration “u” for 30 cm of wall is ca. U = 0, 20 w/m2k and can be more reduced easily yet; Heat energy consumption for typical individual house is ca. 42, 50 kwh/m2 and can be more reduced easily yet; System consists from 17 basic building elements; Lateral surface of one typical structural element: 0, 18 m2 Consumption structural typical elements per unit: 5, 5 elements/m2 The joining the elements follows of thin-layer plaster glue. Basic materials to production small block in system r: - plaster - water - expanded polystyrene, eps

Globex ltd. Is specialized in providing our clients with carpentry products of best brands available on polish, european and american market. In attempt to satisfy our client’s needs, and to follow the developing construction market we are offering you in one place a wide range of products that you may need to finish your project Our company has been providing customers with top quality wooden, pvc and fenestration joinery since 2000. Our offer includes high quality : -PVC windows made with different profiles -Wooden windows, entrance and interior doors -Roller blinds -Wooden shutters and windowsills -Garage doors residential and commercial -Mosquitonets Our range includes both traditional frame styles, as well as innovative solutions based on the very latest technology. All our windows are inward-opening. The most popular type of opening is tilt&turn, but we also offer turn-only, hopper, and tilt&slide, as well as fixed frames. Different constructions and styles can be produced, thanks to a wide range of variables, including frames, mullions, transoms, connecting profiles and accessories. It is possible to customise the construction to your exact requirements, with considerable scope for the arrangement of sashes and glass panes in the window frame. We offer a great variety of finishes, the ubiquitous white aside, from our most popular wood textures like oak or mahogany through to red, blue or green colours. Over 12 years of our business, we have gained recognition on both the polish and foreign markets. We export our products to countries including germany, the czech republic, sweden, norway, spain, uk and italy. Globex offers also the shortest time of the orders’ execution as well as fastest delivery of the products all over the world. Our aim is to exceed the expectations of our customers. We are looking forward to doing business with you. Send in containers

Prefabricated, modular tiny houses, cabins, pods, shell houses, and prefab shelters.

Our company is a manufacturer of eco-friendly, healthy modular, prefabricated houses made using robotic 3d printing technology. Free-form walls and roofs of our houses are made of natural materials in SIP technology with natural insulation ensuring proper energy conditions of the building. The wall partition is characterized by high diffusion, which significantly increases the comfort of living. The modular construction of our houses enables very fast construction - usually 2 to 3 days. The houses are made of a hybrid wood-concrete construction, they are protected against snow, strong wind, and UV rays. The construction of the buildings is designed to be resistant to earthquakes much more than traditional wooden or concrete buildings. Natural materials such as wood, cement, granulated foam glass, rock wool, and fiberglass are used in the construction of buildings for environmental protection and sustainability. The structure of the building is lightweight, heat preserving yet strong and durable.