The PMMA BLANK is developed to be used in milling machines for making temporary restorations, for gingiva formation after placing dental implants and for accurate determination of the occlusal contacts before placing zirconium prosthetic structures.
Available in various shade or colour and thickness.
Radel polyphenylsulfone (PPSU) delivers the highest performance of our sulfone polymers, offering better impact resistance and chemical resistance than polysulfone (PSU) and polyetherimide (PEI).
The high heat resistance and excellent hydrolytic stability of Radel PPSU make it an excellent choice for hot water fittings and medical devices requiring repeated steam sterilization.
Radel R-7000 Series products are specially formulated for use in aircraft interiors and are in compliance with stringent FAA regulations requiring low heat release, low smoke generation and low toxic gas emissions.
Key Features
High HDT of 207C (405F)
Superior toughness and impact strength
Exceptional long-term hydrolytic stability
Better chemical resistance than PSU and PEI
Withstands over 1,000 cycles of steam sterilization without any significant loss of propertiesInherently flame retardant
Transparent
Colorable
Typical Applications
Sterilization cases and trays
Dental and surgical instruments
Medical devices
Aircraft interiors
Airline catering trolleys
Hot water fittings
Plumbing manifolds
Food service trays
Widely applied on different areas of home improvements.Through laminating,vacuum membrane pressing and wrapping.
Our PVC films are environmental-friendly on furniture,kitchen cabinets,windows,doors,wall decals, ceiling and flooring. Customization like natural wood,marble,textile textures can be virtually showed on products.
Usage:
1.PVC film for furniture
2.PVC film for pvc profile
3.PVC film for room door
Material PVC ( polyvinyl chloride )
Color more than 300 kinds pvc foil for you to choose
colo woodgrain, solid color, wood grain, metallic color, we also accept customized
Width 60mm, 1400mm
Thickness 0.12 mm-0.50 mm
Packages sea-worthy or as required with rolls
Payment T/T( 30% prepayment and the balance before shipment )
polyetheretherketone
KetaSpire KT-850 is the intermediate-flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-color pellet form. KetaSpire PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity and excellent chemical resistance to organics, acids and bases.
These properties make it well-suited for applications in healthcare, transportation, electronics, chemical processing and other industrial uses.
Solvays KetaSpire PEEK product line includes:
Neat grades (lubricated and non-lubricated)
Glass fiber and carbon fiber reinforced grades (low and high melt flow)
Wear resistant SL grades (lubricated and non-lubricated)
Natural-colored powders (coarse, fine, super-fine and ultra-fine)
KetaSpire PEEK
KetaSpire PEEK (polyetheretherketone) offers the best combination of fatigue resistance and chemical resistance, which is similar to PPS (polyphenylene sulfide). However, PEEK can operate at higher temperatures and retains its excellent mechanical properties at continuous-use temperatures up to 240 C (464 F), allowing it to replace metal in severe end-use environments. Glass fiber-reinforced and carbon fiber-reinforced grades provide a wide range of performance options.
KetaSpire Product Line
Solvays KetaSpire PEEK product line includes:
Neat grades (lubricated and non-lubricated)
Glass fiber and carbon fiber reinforced grades (low and high melt flow)
Wear resistant SL grades (lubricated and non-lubricated)
Natural-colored powders (coarse, fine, super-fine and ultra-fine)
Solvay KetaSpire KT-820 NT Natural pellets
Solvay KetaSpire KT-820 NL Natural pellets
Solvay KetaSpire KT-820 BK95 Black pellets
Packing:25kg/carton
We can give discount according to order quantity.
51599 Plastic Products Suppliers
Short on time? Let Plastic Products sellers contact you.
Radel polyphenylsulfone (PPSU) delivers the highest performance of our sulfone polymers, offering better impact resistance and chemical resistance than polysulfone (PSU) and polyetherimide (PEI).
The high heat resistance and excellent hydrolytic stability of Radel PPSU make it an excellent choice for hot water fittings and medical devices requiring repeated steam sterilization.
Radel R-7000 Series products are specially formulated for use in aircraft interiors and are in compliance with stringent FAA regulations requiring low heat release, low smoke generation and low toxic gas emissions.
Key Features
High HDT of 207C (405F)
Superior toughness and impact strength
Exceptional long-term hydrolytic stability
Better chemical resistance than PSU and PEI
Withstands over 1,000 cycles of steam sterilization without any significant loss of properties
Inherently flame retardant
Transparent
Colorable
Typical Applications
Sterilization cases and trays
Dental and surgical instruments
Medical devices
Aircraft interiors
Airline catering trolleys
Hot water fittings
Plumbing manifolds
Food service trays
SOLVAY Veradel PES/PESU Series:
Veradel PESU was formerly marketed as Gafone PESU Veradel 3000P, 3100P, 3200P, 3400P and 3600P are polyethersulfone (PESU) powders for dissolving or dispersing into solutions. They can also be ground to smaller particle size or blended with other solid particles. The grades differ by their molecular weights, with 3000P the highest and 3600P the lowest. There is a direct correlation between molecular weight and solution viscosity. PESU offers excellent toughness and outstanding hydrolytic resistance. It resists attack from steam, boiling water, and mineral acids. Cast films or coatings of PESU are transparent and have additional desirable properties including long term thermal stability, excellent metal adhesion and formability and inherent flame resistance. Typical applications include high-temperature coating formulations, membranes, advanced high-temperature composites, and specialty adhesives.
PES/PESU SOLVAY Veradel 3000P
PES/PESU SOLVAY Veradel 3100P
PES/PESU SOLVAY Veradel 3200P
PES/PESU SOLVAY Veradel 3400P
PES/PESU SOLVAY Veradel 3600P
VeradelPESU (polyethersulfone) combines good chemical resistance with a high heat deflection temperature, making it a good fit for baby bottles and other food service applications. This resin is also inherently flame retardant for use in electronic components and testing devices
AvaSpire PAEK (polyaryletherketone) is a family of high-performance polyketones tailored to fill cost and performance gaps between PEEK and other high-performance polymers. For example, ductility and toughness can be significantly improved versus comparable grades of PEEK, delivering 20% higher tensile elongation at yield and doubled tensile elongation at break values.
Depending on the grade, AvaSpire PAEK outperforms comparable grades of PEEK.
Higher stiffness from 150 �°C to 190 �°C (302 �°F to 374 �°F)
Improved ductility and toughness
Equal or better chemical resistance
UL-94 V0 rating at 0.8 mm
Comparable strength and stiffness at up to 30% lower cost
Excellent aesthetics and colorability
AvaSpire PAEK is available in
KetaSpire PEEK
KetaSpire PEEK (polyetheretherketone) offers the best combination of fatigue resistance and chemical resistance, which is similar to PPS (polyphenylene sulfide). However, PEEK can operate at higher temperatures and retains its excellent mechanical properties at continuous-use temperatures up to 240 C (464 F), allowing it to replace metal in severe end-use environments. Glass
fiber-reinforced and carbon fiber-reinforced grades provide a wide range of performance options.
KetaSpire Product Line
Solvays KetaSpire PEEK product line includes:
Neat grades (lubricated and non-lubricated)
Glass fiber and carbon fiber reinforced grades (low and high melt flow)
Wear resistant SL grades (lubricated and non-lubricated)
Natural-colored powders (coarse, fine, super-fine and ultra-fine)
Packing spec: 25kgs per bag.
Please share us the material model number if you have and color/ order quantity so that we can quote you exactly the material meet your demands.
Ixef PARA (polyarylamide) provides a unique combination of strength and aesthetics, making it ideal for complex parts that require
both overall strength and a smooth, beautiful surface.
Ixef compounds typically contain 50-60% glass fiber reinforcement, giving them remarkable strength and rigidity. What makes them
unique is that even with high glass loadings, the smooth, resin-rich surface delivers a high-gloss, glass-free finish that's ideal
for painting, metallization or producing a naturally reflective shell.
High flow into thin walls
In addition, Ixef PARA is an extremely high-flow resin so it can readily fill walls as thin as 0.5 mm, even with glass loadings as high as 60%.
Excellent Surface Finish
Superb, resin-rich surface provides a highly polished appearance, even with high glass fiber content.
Solvay IXEF 1002 Natural/Black color resins
Packing:25 kgs a bag
Solef PVDF
High-performance semi-crystalline fluoropolymers
Solef PVDF is a fluorinated semi-crystalline thermoplastic which is obtained by polymerizing vinylidene fluoride. Without any additives, it has the intrinsic stability inherent to fluoropolymers even when exposed to harsh environments, providing the user with a unique combination of properties resulting in longer equipment life.
In addition to the PVDF homopolymers, which are recognized worldwide for their excellent performance in a variety of applications, Solvay Specialty Polymers has developed a wide range of VF2-HFP copolymers, and VF2-CTFE copolymers to respond to specific needs of the market.
Key Features
Chemical inertness to most acids, aliphatic and aromatic organic compounds, chlorinated solvents, alcohols, etc.
Very high purity
Low coefficient of friction
Continuous use within a wide range of temperatures
Unaffection by UV and good resistance to �³ radiation
Excellent intrinsic fire resistance
Available grades approved for food contact applications
Good capability for thermoforming and very easily joined by welding
Performance
Relative Performance of Melt-Processable Fluoropolymers
In addition to Solef PVDF resins, Solvay Specialty Polymers offers a wide range of fluoropolymers which are also easily processable by injection, extrusion and all conventional processing techniques.
Solef PVDF
High-performance semi-crystalline fluoropolymers
Solef PVDF is a fluorinated semi-crystalline thermoplastic which is obtained by polymerizing vinylidene fluoride. Without any additives, it has the intrinsic stability inherent to fluoropolymers even when exposed to harsh environments, providing the user with a unique combination of properties resulting in longer equipment life.
In addition to the PVDF homopolymers, which are recognized worldwide for their excellent performance in a variety of applications, Solvay Specialty Polymers has developed a wide range of VF2-HFP copolymers, and VF2-CTFE copolymers to respond to specific needs of the market.
Key Features
Chemical inertness to most acids, aliphatic and aromatic organic compounds, chlorinated solvents, alcohols, etc.
Very high purity
Low coefficient of friction
Continuous use within a wide range of temperatures
Unaffection by UV and good resistance to �³ radiation
Excellent intrinsic fire resistance
Available grades approved for food contact applications
Good capability for thermoforming and very easily joined by welding
Solvay Halar 6012 F
Halar ECTFE, a copolymer of ethylene and chlorotrifluoroethylene, is a semi-crystalline melt processable partially fluorinated polymer. It is available in different grades that are specifically designed for electrostatic powder coating.
Halar ECTFE is particularly suitable for use as a coating material in protection and anti-corrosion applications thanks to its unique combination of properties.
Key features
Very good chemical and thermal resistance
Optimum permeation resistance
Outstanding flame resistance
Very good surface characteristics
Surface smoothness
Purity
Markets and Applications
Typical applications served by Halar ECTFE include those in contact with highly corrosive or ultrapure chemicals such as strong inorganic bases and strong mineral and oxidizing acids including:
Vessels
Reactors
Semiconductor chemical storage tanks and ductwork
Piping systems
Centrifuges
Agitators
Exhaust hoods
Filters
Electroplating equipment
The super-softening property of Redispersible Polymer Powder (RDP) can improve the flexibility of cement-based materials while guarantees other work performances. In this study, the influences of different mixing amounts of RDP on the compressive strength, flexural strength, flexural compression ratio and bonding strength of sulphoaluminate cement mortar were investigated. The microscopic morphological structure of RDP-modified sulphoaluminate cement mortar was also observed through SEM to analyse the influence mechanism. Results show that, with the mixing amount of 2.0%, the compressive strength of cement mortar was improved. This mixing amount also increased the 28d flexural strength to 8.21 MPa (5.0% improvement) and 14d bonding strength to 5.6 MPa (27.3% improvement). Addition of more RDP resulted in the increase in flexural compression ratio because the powder particles formed water-insoluble continuous polymer colloidal film in hardened paste. This film generated a network with cement dydration products throughout the paste, consequently promoting the flexibility of cement.
Recycled White HDPE Plastic Granules from our factory in Thailand
HDPE blow molding grade can be used for producing small sized containers such as bottles, tanks, barrels. It can also used in the production of intermediate bulk-containers, large toy, floating matters and medium to large sized containers.
specification :
Melt Flow Index (190 OC /2.16kg) ASTM D1238 = 0.37g/10min
Density ASTM D792 = 0.965 g/ cm3
Melting Point by DSC ASTM D3418 = 134.8 C
Tensile strength @Yield ASTM D 638 = 23.25 MPa
%Elongation @ break ASTM D 638 = 636.81%
Flexural modulus ASTM D 790 = 556.82 MPa
Flexural Strength ASTM D 790 =21.84 MPa
Notched Izod Impact Strength ASTM D256 = 216.89 J/M
FAQ
Q: Are you the manufacturer or trading company
A: We are both of the manufacturer and trading company. We have factory at Samut Sakorn and our office at Phra Pradaeng, Samut Prakan in Thailand.
Q: Can you provide free samples
A: Sample is free, Buyer in charge of shipping cost.
Q: How long is your delivery date
A: In general within 15 day after your prepayment, It according to quantity.
Q: What is your term of payment
A: 30% T/T in advance, Then 70% T/T or L/C balance before shipment.
Recycled Transparent HDPE Plastic Granules from our factory in Thailand.
HDPE blow molding grade can be used for producing small sized containers such as bottles, tanks, barrels. It can also used in the production of intermediate bulk-containers, large toy, floating matters and medium to large sized containers.
Packing Detail
25 kg / bag
800 bags(20MT)/20' container , 1080 bags(27MT)/40' container
specification
Melt Flow Index (190 OC /2.16kg) ASTM D1238 = 0.34g/10min
Density ASTM D792 = 0.949 g/ cm3
Melting Point by DSC ASTM D3418 = 135.9 C
Tensile strength @Yield ASTM D 638 = 23.50 MPa
%Elongation @ break ASTM D 638 = 693.70%
Flexural modulus ASTM D 790 = 559.74 MPa
Flexural Strength ASTM D 790 =21.76 MPa
Notched Izod Impact Strength ASTM D256 = 234.85 J/M
FAQ
: Are you the manufacturer or trading company?
A: We are both of the manufacturer and trading company. We have factory at Samut Sakorn and our office at Phra Pradaeng, Samut Prakan in Thailand.
Q: Can you provide free samples?
A: Sample is free, Buyer in charge of shipping cost.
Q: How long is your delivery date?
A: In general within 15 day after your prepayment, It according to quantity.
Q: What is your term of payment?
A: 30% T/T in advance, Then 70% T/T or L/C balance before shipment.
PP Injection and Film grade can be used for producing
Blown film work such as Clothes bag.
It can also used in the production of Household appliances, plastic containers, small box, toys, Office equipment, Electrical parts.
specification
Melt Flow Index (190 OC /2.16kg) ASTM D1238 = 10.52g/10min
Density ASTM D792 = 0.918 g/ cm3
Melting Point by DSC ASTM D3418 = 162.7 C
Tensile strength @Yield ASTM D 638 = 30.89 MPa
%Elongation @ break ASTM D 638 = 311.04%
Flexural modulus ASTM D 790 = 994.75 MPa
Flexural Strength ASTM D 790 =38.66 MPa
Notched Izod Impact Strength ASTM D256 = 39.23 J/M
FAQ
Q: Are you the manufacturer or trading company
A: We are both of the manufacturer and trading company. We have factory at Samut Sakorn and our office at Phra Pradaeng, Samut Prakan in Thailand.
Q: Can you provide free samples
A: Sample is free, Buyer in charge of shipping cost.
Q: How long is your delivery date
A: In general within 15 day after your prepayment, It according to quantity.
Q: What is your term of payment
A: 30% T/T in advance, Then 70% T/T or L/C balance before shipment.
Recycled White PP Plastic Granules from our factory
PP Injection and grade can be used for producing Blown film work such as Clothes bag.
It can also used in the production of Household appliances, plastic containers, Office equipment, Electrical parts, Large plastic bucket, Parts in the washing machine,
Car parts and Refrigerator.
specification
Melt Flow Index (190 OC /2.16kg) ASTM D1238 = 28.61g/10min
Density ASTM D792 = 0.921 g/ cm3
Melting Point by DSC ASTM D3418 = 129.5 ,165.5 C
Tensile strength @Yield ASTM D 638 = 23.47 MPa
%Elongation @ break ASTM D 638 =17.33%
Flexural modulus ASTM D 790 = 928.28 MPa
Flexural Strength ASTM D 790 =32.74 MPa
Notched Izod Impact Strength ASTM D256 = 70.84 J/M
Recycled Black PP Plastic Granules from our factory
PP Injection and Film grade can be used for producing
Blown film work such as Clothes bag.
It can also used in the production of Household appliances, plastic containers, small box, toys, Office equipment, Electrical parts.
specification
Melt Flow Index (190 OC /2.16kg) ASTM D1238 = 11.25g/10min
Density ASTM D792 = 0.936 g/ cm3
Melting Point by DSC ASTM D3418 = 131.6 , 161.3 C
Tensile strength @Yield ASTM D 638 = 20.99 MPa
%Elongation @ break ASTM D 638 = 420.39%
Flexural modulus ASTM D 790 = 781.38 MPa
Flexural Strength ASTM D 790 =28.92 MPa
Notched Izod Impact Strength ASTM D256 = 30.68 J/M
FAQ
Q: Are you the manufacturer or trading company?
A: We are both of the manufacturer and trading company. We have factory at Samut Sakorn and our office at Phra Pradaeng, Samut Prakan in Thailand.
Q: Can you provide free samples?
A: Sample is free, Buyer in charge of shipping cost.
Q: How long is your delivery date?
A: In general within 15 day after your prepayment, It according to quantity.
Q: What is your term of payment?
A: 30% T/T in advance, Then 70% T/T or L/C balance before shipment.
