JJC High Quality Convenient camera plastic lens cap l Scratch, dust damage protection l Will not cause vignetting l No need to worry about losing your lens cap l With a filter attached to the camera lens, JJC ALC-LX100 is able to close perfectly l Thickness of compatible filters is up to 8mm l Allows you to take photos normally without removing the cap from the lens
JJC LH-83M Lens Hood features a filter access window for easier adjustment of specialty rotating filters such as ND and CPL filters while the hood is in place. The hood prevents unwanted stray light from entering the lens by extending and shading the end of the lens. What more, it has a non-glare matte finish on the inside to further prevent or limit lens flare. And there is no vignetting with the hood on. The "petal" shape of this lens hood maximizes the amount of hood coverage for the minimum amount of weight and hood area. It can also be placed backwards over the lens for a more compact storage solution. It allows you to put on a lens cap with the hood on, too. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. JJC LH-83M lens hood replaces Canon EW-83M. Product Highlights Comes with a filter access window for CPL, ND filters adjustment Blocks stray light from entering the lens Reversible for easy storage Will not affect the use of lens cap Non-glare matte finish prevents reflections No vignetting will be caused with the hood on Extra protection from accidental impact
The FX Series Flash Multiplier designed by JJC is for use with telephoto lenses of 300mm or longer. It is excellent for photography on wildlife, birding, wedding, evening party, portraits and more. The Flash Multiplier increases the flash output by about 2 to 4 f/stops and allows you to shoot at greater distances and shoot with smaller apertures. It also reduces the drain on battery power. The lens is lightweight and durable. It focuses and concentrates the output of the flash into a narrow beam, thus increasing your flash range. With four surfaces connected together and the reflective lining, the collapsible black box helps focus and enhance luminous beam and prevents light from leaking undesirably. Besides, the lens is held in place with no sagging or flopping, which ensures the best results and makes it easy to use. Just replace the flash adapter ring, and you can use the flash multiplier on much more other models of flashes. This is not only convenient, but also saves you much cost. The unit is also simple and quick to set up and remove. After folding it flat, you can store it in the supplied case. Furthermore, the unit is light in weight, making it convenient to carry. JJC FX Series Flash Multiplier will help you get more creative effects when you capture pictures. Package Contents Lens x 1 Collapsible Black Box x 1 Square Adapter x 1 Instruction Manual x 1 Carrying Case x 1 Product Highlights Excellent for photography on wildlife, birding, wedding, evening party, portraits and more Increases the flash output by about 2 to 4 f/stops Allows you to shoot at greater distances and shoot with smaller apertures Reduces the drain on battery power By replacing the flash adapter ring, you can use the flash multiplier on much more other models of flashes Easy attachment and removal, and folds flat for compact storage in supplied case Lightweight for easily carrying For use with telephoto lenses of 300mm or longer With and Without the Flash Multiplier 1.JJC FX Series Flash Multiplier allows you to shoot at greater distances.
Product category:, Camera filters Model/item no.:, Slim mrc-uv-77 Brand:, Tanso Min. Order:, 50 pieces Unit price:, Us $ 5-50 / piece Country of origin1:, Ningbo , zhejiang , china (mainland) Product packing way:, 1pc/plastic box Payment term:, T/t, western union Delivery port:, Fob ningbo Date of delivery:, 7days Sales method:, Export, manufacture, wholesale, service, retail Quantity per month:, 200000
Product category:,Camera filters Model/item no.:,Slim mrc-cpl-72 Brand:,Tanso Min. Order:,50 pieces Country of origin1:,Zhejiang , china (mainland) Product packing way:,1pc/plastic box Payment term:,T/t, western union Delivery port:,Fob ningbo Date of delivery:,7days Sales method:,Export, manufacture, wholesale, service, retail Quantity per month:,200000
Product specifications /features Brand name: tanso Item: tr-561b Product name: table tripod Color: black / sliver Packing: white box Minimum order quantity: 300pieces Net weight: 85g Max load capacity: 0.5kg Folded height: 130mm Max height: 105mm Max operating height: 190mm Max tube diameter: 10mm Competitive advantages Prompt delivery ,
Product specifications /features Tanso camera track slider with glider video stabilization system & adjustable damping for dv & dslr 1.8m / 70.9" Band: tanso Article no.: camera slider ts-cs-180 Material: aviation aluminum alloy Process: precision casting Surface treatment: anodizing Color: back Length: 1.8m / 70.9 inch Max load-bearing: 10kgs, 15kgs, 30kgs Ball head mounting hole: 3/8 and 1/4(under the 3/8" screw) Packing: bags or safe box Minimum order quantity: 50 piece/pieces Other features: 1. Anodized slider carrier w 2. Bubble level 3. Adjustable damping 4. Noise-free operation 5. Kamerar's compound friction bearings equipmented. Camera slider, video slider, track slider
Didea use precision cnc machining processing technic to make the products. It make the tripod very stable and the hardness and precision are much better than the secondary processing of casting and forging.The appearance is very smooth and beautiful. K series tripod, based on the t series feature: done by machine and use hard anodizing technology, this makes our tripods more stable and fastness. K series tripod even upgrade the technology and the function: the column, bearing plate and the leg tube can be assembled as monopod, even leg tube and bearing plate can be fixed as monopod K series function: 1. Tripod converted to monopod. 2. Low angle shoot without center column. 3. Shoot with inverted center column. 4. Inverted folded to save space, convenient to carrying, traveling and outdoor shoot. Tripod bag and paper box
8.Power save mode 9.Overheating protection 12.Support high speed continuous shooting:in 1/16 or less brightness, it can support 12eps high-speed continuous shooting 13.Support red-eye reductin flash mode 14.Raster af asist lamp 15.Built-in wide panel & bounce card Pcs/carton Ctn size W.G 24 53.5*41.5*43.5 18kg
Quick details Brand name: new_view model number: cpl 55mm type: polarizer filter place of origin: China (mainland) polarizing rate: over 99.95% . Packaging & delivery Packaging detail: blister, white&color box packing Delivery detail: 7days after signed pi ISO9001-2008 & ISO14001-2004 arrpoved factory CE, ROHS, SGS, UL certificated Customer's design and logo are welcome 100% strict qc test for each finished product Strong r&d team specially for oem&odm service
Voeloon v100(oloong sp-660) universal professional flashlight 1) universal electronics flashlight 2) guide number:35(iso100, 35mm) 3) fast recycling time:2s(full power output, 4*aa ni-mh batteries) 4) 25 levels light quantity output control system 5) s1/s2 flash mode(support for multiple lamp lighting system) 6) overheating protection(comes with the temperature detection system) 7) large lcd screen 8) metal mounting foot 9) for nikon, canon, olympus & pentax
Voeloon v200(oloong sp-680) wireless ttl professional flash speedlight 1) 24-180 manual zoom 2) simultaneously compatible to nikon & canon wireless ttl flash system 3) guide number:35(iso100, 35mm);gn50(iso100, 180mm) 4) fast recycling time:2s(full power output, 4*aa ni-mh batteries) 5) f1/f2 flash mode(support for multiple lamp lighting system) 6) overheating protection(comes with the temperature detection system) 7) lcd display led-backlit 8) 22 level manual light quantity output control system 9) for nikon, canon, olympus & pentax 10) applicable to wireless ttl compatible modes: nikon d90, d700, d7000, d300s, flashlight sb700/800/900/910/su800; canon: 600d, 60d, flashlight 580ex¡ì¡à, st-e2
Voeloon v300(oloong sp-660ii) ttl professional camera flash light 1) ttl auto flashlight(i-ttl for nikon or e-ttl ii for canon) 2) guide number:35(iso100, 35mm) 3) fast recycling time:2s(full power output, 4*aa ni-mh batteries) 4) 22 levels light quantity output control system 5) s1/s2 flash mode(support for multiple lamp lighting system) 6) overheating protection(comes with the temperature detection system) 7) large lcd screen 8) dual auxiliary focus lamp 9) for nikon, canon, olympus & pentax 10) iso9001 & iso4000
1) ttl zoom flashlight 2) i-ttl for nikon or e-ttl ii for canon 3) guide number:gn35(iso100, 35mm);gn50(iso100, 180mm) 4) fast recycling time:2s(full power output, 4*aa ni-mh batteries) 5) 24-180 manual zoom 6) s1/s2 flash mode(support for multiple lamp lighting system) 7) overheating protection(comes with the temperature detection system) 8) lcd display led-backlit 9) 22 level manual light quantity output control system 10) dual slave focus lamp 11) for nikon, canon, olympus & pentax 12) iso9001 & iso4000 Digital camera flash gun
Voeloon v600(oloong sp690ii) digital camera accessory flash speed light Description: 1) support nikon i-ttl(ttl: 24mm-180mm;gn:35) 2) compatible with nikon wireless creative lighting system(master/slave mode) 3) stroboscopic system 4) fast recycling time 5) large capacity electrical storage system 6) sound monitoring system 7) high-definition lcd and led backlit 8) xenon lamp overheating protection system 9) high-temperature insulation 10) metal mounting foot 11) auxiliary focus system 12) light lead flashing system 13) iso9001 & iso4000 14) advanced application;you can set exposure compensation¡¢exposure bracketing¡¢front/rear-curtain sync of external flash, and it supports red-eye reduction flash mode¡¢fv lock¡¢power saving mode.
Wireless system System mode: digital fsk 2.4ghz Distance range: more than 400m Wireless channel: 15 fixed channels and 1 auto channel Trigger mode Receiver: output support ttl, hot shoe and connecting cable socket Power Transmitter: transceiver 300hrs(aa 1.2v 2400mah rechargeable battery) Receiver::receiver 200hrs(aa 1.2v 2400mah rechargeable battery) Performance Flash mode: e-ttl, ttl, m (for canon) Support mixed mode output(such as, ttl mode in group a, m mode in group b) Support different ev addition/subtraction of each ttl group setting Support output light ratio Sync mode: 1st curtain, 2nd curtain, high speed sync red-eye reduction Group control: 3 different groups Function: supports flash zooming, focal length, iso, shutter speed, fv lock and fp Sync speed: 1/8000s Compatible flash: flashgun, studio light and outdoor light Firmware support: support upgrade the device online Rikon standard color packing Weight:0.8kg Dimensions: 19.5cm*12.5cm*6.5cm
1.Features: 1.1Vf-902 is using 2.4ghz which is global free frequency 1.2Using fsk system which more stable. 1.3Operating distance up to 100m. 1.4Flash sync speed up to 1/250s. 1.5Purchase the meyin studio connecting cable to control speed lite or studio light. 1.6Purchase the meyin shutter connecting cable to control camera shutter. 2.Specification: Type: fsk 2.4ghz wireless system Operation range: 100m Channel: 16 Shutter release: half-press, full-press Tx socket: 3.5mm 3 steps input plug Rx socket: 3.5mm 3 steps output plug Usable number: >10000times(2xaaa alkaline cell) Rx stand-by-time: 45hours (2xaaa alkaline cell) Dimensions£º(w x l x h): tx: 76 x 36 x 35 mm rx: 76 x 36 x 38.7 mm 3.Package included Vf-902tx: 1pcs Vf-902rx: 1pcs Instructions manual: 1pcs 4.Optional accessories Hot shoe adapter 3.5mm+3.5mm flash cable 3.5-6.35 convertor 3.5-6.35 flash cable Shutter release cable Weight:0.3kg Dimensions: 12.5*6.5*5.5cm
Rs-801 Cable shutter remote Specification Style: cable shutter release control Mode: two-press button for focus and shoot. Hold the button for continuous shooting or long exposure. Cable length: 70cm Size: 91mm(l) x 23.7mm(w) x 17.1mm(h) Advantage: 1.Rs-801 shell made of abs material. They are all new material instead of recycle material. 2.Rs-801 button made of pure copper. It can be pressed more than 1 million times. 3.Rs-801 support focus, shot and bulb mode. 4.Rs-801 always use the latest version connector.
Haida Circular Polarizing (C-POL) Filters use the neutral polarization material, without any color cast. Through special techniques to glue them together with optical glass, also with special crack resistance treatment. For the concern that you may go to the rain forest where is hot and wet, or to the area where is freezing, so an excellent quality CPL filter must go through the extreme temperature difference. Under these circumstances, an ordinary polarizing filter will always have the problem of air bubble or adhesive failure. But Haida's special strict processing technique just put an end to all these bad results may occur. When using the polarizing filter, smooth rotation will be needed to take the brilliant pictures.Ordinary CPL filters could easily get frozen when in low temperature, or lose the comfortable damping feel in high temperature. Our special processing technique guarantee each CPL filter from Haida has the steady rotating function between -40 and 80.
Haida Wide Angle Variable Neutral Density Filters is made of special selected optical material, by rotating the frame, the density could be easily adjusted from ND2 (ND0.3) to ND1000 (ND3.0).The premium special neutral optical material guarantee no color cast would occur when adjusting. Original wide angle design just acts as the same effect as the ultra slim filter frame to eliminate "ghosting". The upside part of frame is made of premium alloy material with special non-reflection treatment, the under part is in bright dark. The whole filter looks so kingly. The special processing techniques guarantee the steady rotating function in any temperatures from -40 to 80. Warmly remind you that because of physical properties and light changes in different circumstances,sometimes slight crossbar shadow may occur, please decrease the neutral density till it disappear, then taking pictures.
