Fusion splicer is used for joining two optical fibers end-to-end using heat, to fuse the two fibers together in such a way that light passing through the fibers is not scattered or reflected back by the splice and so that the splice and the region surrounding it are almost as strong as the virgin fiber itself. We has been dedicated to R & D, manufacturing fusion splicer from 2010, and successfully obtained 5 patents for the fusion slicer research. Uniway UW-65H is our latest developed product. It is more concise and smaller in size and has obtained 2 patents for its new technologies. Specification Applicable Fibers: SM, MM, NZ-DS, EDF, Pigtail, Cable (rubber-insulated wire), SC/LC/FC connector (optional function) Average Splice: Loss 0.02dB(SM), 0.01dB(MM), 0.04dB(NZDS), 0.04dB(EDF) Return Loss: â?¥60dB Tension Test: 2.0N(200gf)(Standard) Typical splicing time: 10 seconds Typical heating time: 30 seconds Splicing Program: 50 groups Protection Sleeve: 20mm, 40mm, 60mm Operating Language: English Operating Conditions: -10~+50�°C(operation temperature),0~95% RH(humidity), 0~5000m(altitude) Electrode Life; More than 3500 splices Power Supply: AC adaptor: 100~240V input voltage, 50/60Hz; 12V, 5A output voltage(DC) Inner lithium battery: 11.1V, 6AH for up to 200 splices with heating Monitor: 5 inches high resolution colorful LCD display Fiber Image: X or Y axis Separately views 400 times magnification, or Simultaneously 300 times Storage of Splice Result 6,000 groups of latest splice results Splicing Model: Auto & Manual &Full Auto Dimensions: 130(W)*135(D)*130(H)mm; Package size: 53*32*30cm Weight: 2.21kg+0.37kg (battery weight)=2.58kg; Package G.W.: 8.68kg
The right angle prisms are often preferable to an inclined mirror in applications involving severe acoustic or inertial loads, because they are easier to mount, and deform much less than mirror in response to external mechanical stress. As long as acceptance angle limitations for TIR from the roof faces are not exceeded, the right angle prisms can serve as a retro reflector, turning beams back to the original direction.Right-angle prism is the most common type of prisms. It is used to re-direct a beam of light at 90 degrees from the the incident direction or used as a 180 beam retro-reflector. They are often coated with various optical coatings to form cubic beam splitters and color separation cubes used in various projection systems. Specifications: Material BK7, UVFS Dimensional tolerances ±0.01mm Clear aperture 95%@central area 90 angle tolerance ±2 arcmin (General type) ±5 arcsec (Precision type) Pyramidal tolerance ±1 arcmin (General type) ±30 arcsec (Precision type) Surface quality 40-20 S-D Surface flatness
Light Cured Nano Hybrid Flowable Composite Fusion Flo is an excellent flowable composite that delivers high strength & wear resistance. It is characterized by optimum surface affinity, penetrates into most difficultarea.It combinesestheticsaswell as flowon demand handling foruse. INDICATIONS Filling of smaller cavities Extended fissure sealing Restoration class III to V Repairs of fillings & veneers PRODUCT BENEFITS Optimal flowability Higher filler loading of 70% w/w Excellent physical properties Lower polymerisation shrinkage Very good abrasion resistance
Features 1Wide pass band 2Low Insertion Loss 3High Stability and reliability 4High Channel Isolation 5Epoxy-free on Optical Path Applications 1WDM Network 2Line Monitoring 3Acess Network 4Cellular Application 5Fiber Optical amplifier Parameter4 Channel8 Channel16 Channel MuxDemuxMuxDemuxMuxDemux Channel Wavelength (nm)1270~1610 Center wavelength Accuracy (nm)0.5 Channel Spacing (nm)20 Channel Passband (@-0.5dB bandwidth (nm)>13 Insertion Loss (dB) smallest Channel Uniformity (dB) smallest Channel Ripple (dB)0.3 Isolation (dB)AdjacentN/A>30N/A>30N/A>30 Non-adjacentN/A>40N/A>40N/A>40 Inertion Loss Temperature Sensitivity (dB)
Techwin Fusion Splicer for maintenance of optic fiber www dot techwin-china dot com We will try our best to provide products similar to Fujikura Fusion Splicer, Sumitomo Fusion Splicer, FITEL Fusion Splicer, INNO Fusion Splicer, ILSINTECH Fusion Splicer, FiberFox Fusion Splicer. How About This Product? The TCW-605E Series adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance. The Uses: � The TCW605E Series Fusion Splicer have been using in English, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc. � Widely used for SM and MM Quartz Fiber with diameter 80-150μm(300μm optional), coating layer diameter 0.1-1.0mm and bare fiber length 16mm more or less. � Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications. Detailed Introduction: � Not only a Fusion Splicer, but also your partner who make your job easy and happy � 5.0 inch TFT color LCD monitor with anti-reflective coating � The advanced core to core fiber profile alignment system(PAS) � ARC Calibration FREE system. ARC Calibration sub-menu included in the Menu too, can do the ARC Calibration by Manual when necessary � X/Y axes was displayed or both X and Y were displayed simultaneously, Magnification up to 300 times � 8 seconds splicing time, 30 seconds Heat-Shrinking � Battery capacity was display in real time, precisely
Model OPTO 560 Description,Specifications Image pickup device,5 Mega pixel camera Video projection lens ,Double telecentric lens Field of view,56 mm(W) x 42 mm(H) ; Diagonal : 70 mm Illumination system,Collimated green LED illumination Least count of measurement ,1,µm Repeatability ,3 ,µ Accuracy,,6 ,µ Interface,USB 3.0 Environmental conditions, Operating ambient temperature,(+) 10,�° to 35,�° C Operating ambient humidity,20% to 80% RH(no condensation) Z stage, Movement,40 mm Load Capacity,5 kg Power supply,AC 100-240V 50/60Hz ,180VA max. Weight,Approx. 24 kg Software Features:- Automatic measurement of 2-dimensional production parts in seconds. The software measures all defined dimensions with only "one click" required. Measure small quantities fast and accurate. Create measurement templates from scratch within minutes. Created templates can be used indefinitely., Create measurement reports from every measurement taken to analyse processes.
page magnifier Hand free page magnifier Full page magnifier fresnel lens Full page reading book magnifying glass Rigid page magnifier Full-page magnifier Lighted full page magnifier for reading Reading page magnifier Reading magnifier and lighted full page magnifier for reading. Fresnel page magnifiers Full page magnifier for reading books, magazines, and newspapers
Pocket Microscope 100x 12pcs/ ctn /2cuft / 12kgs
1.Applicable type of fibers:smf(g.652/657), mmf(g.651), dsf(g.653), nzdsf(g.655) 2.Fiber count:single to 12 3.World's first 6-direction 30 inch drop proof, tough in harsh conditions. 4.Wide color lcd monitor 5.High resolution 4.7 inch monitor with better visibility under the sun.
Applicable fibers: singlemode (g.652 & g.657), multimode (g.651), ds (g.653), nzds(g.655) 14-second automated tube heater. 5 mm cleave length for splice on connector or small package needs
SM OTDR Optical Time Domain Reflectometer, Model# FHO5000-D35 - SM OTDR - 7'' High Resolution Screen - Wavelengths: 1310/1550nm - Dynamic Range:35/33dB - Event/ Attenuation Dead zone: 1M/ 4M - Selectable Distance (Km): 4m-240km - Print Report easily - Connect to your computer with a cable - Real time & Averaging testing mode - With .sor software & A->B, B->A analysis software - Free updating software - With Black Carrying bag Specification: OTDR (MODEL# FHO5000-D35) General Parameters Testing Wavelength 1310/1550nm Dynamic Range 35/33dB Event Dead Zone 0.8m Attenuation Dead Zone 4m Pulse Width 3ns, 5ns, 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1µs, 2µs, 5µs, 10µs ,20us Testing Range Dead zone, 500m, 2km, 5km, 10km, 40km, 80km, 120km, 160km, 240km Sampling Resolution Minimum 0.25m Linearity = 0.05dB/dB Display Resolution 0.01dB Loss Threshold Step 0.01dB Loss Resolution 0.001dB Distance Resolution 0.01m Sampling Point Maximum 128,000 points Distance Accuracy ± (1m+measuring distance×3×10-5+sampling resolution) Data Storage 40000 groups of curve Internal VFL Parameter Laser Launcher Type LD Output Power 10mW Distance Range About 12km Optical Connector FC/UPC Output Wavelength 650nm ± 10nm Modulation Frequency CW / 2Hz Physical Parameters Interface Internet port, 3 USB port Display 7 inch TFT-LCD Screen Battery 7.4V/4.4Ah lithium battery, continuous 5.5 hours Working Temp -10°C~+50°C Storage Temp -20°C~+75°C Dimension 253×168×73.5mm / 1.5kg Accessories Standard Accessories 1* FHO5000 1* Quick guide 1* USB cord 1* 12V AC/DC adapter 1* Battery 1* Software CD 1* FC adapter 1* Carrying case
A mirror is an object that reflects light in such a way that, for incident light in some range of wavelengths, the reflected light preserves many or most of the detailed physical characteristics of the original light. This is different from other light-reflecting objects that do not preserve much of the original wave signal other than color and diffuse reflected light. Material:B270, H-K9L,etc; Surface quality:40-20; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Parallel tolerance:0.002mm.
Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3'; Parallelism tolerance:3'.
Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3'; Parallelism tolerance:3'.
Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3'; Parallelism tolerance:3'.
Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3';
A mirror is an object that reflects light in such a way that, for incident light in some range of wavelengths, the reflected light preserves many or most of the detailed physical characteristics of the original light. This is different from other light-reflecting objects that do not preserve much of the original wave signal other than color and diffuse reflected light. Material:B270, H-K9L,etc; Surface quality:40-20; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Parallel tolerance:0.002mm.
A mirror is an object that reflects light in such a way that, for incident light in some range of wavelengths, the reflected light preserves many or most of the detailed physical characteristics of the original light. This is different from other light-reflecting objects that do not preserve much of the original wave signal other than color and diffuse reflected light. Material:H-K9L,H-BaK7,B270,etc; Dimensional tolerance: plusmn 0.05 mm; Surface quality:40-20; Surface accuracy:lambda; Parallel tolerance: plusmn 0.002 mm
A mirror is an object that reflects light in such a way that, for incident light in some range of wavelengths, the reflected light preserves many or most of the detailed physical characteristics of the original light. This is different from other light-reflecting objects that do not preserve much of the original wave signal other than color and diffuse reflected light. Material:B270, H-K9L,etc; Surface quality:40-20; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Parallel tolerance:0.002mm.
Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3'; Parallelism tolerance:3'.
