Aviation Kerosene colonial grade 54 jet fuel MOQ: 500,000 Barrels per Month MAX: 5,000,000 Barrels per Month Origins: Azerbaijan Shipping Inspection - SGS or equivalent at the loading port Next steps - If the above sounds good, let's discuss and we can get a more precise quote based on your exact requirements.
ADDITIVES Antioxidant in hydro processed fuel Mg/I Min 17 Antioxidant non hydro processed fuel Mg/I Max 24 Static dissipater first doping ASA-3 Mg/I Min 24 Stadis 450 Mg/I Min 1 COMBUSTION PROPERTIES Smoke point mj/lkg Min 18.4 D4808 Specific energy, net Mm Min 19 D1322 Luminomitter number Min 45 D1740 Naphthalenes % volume Max 3 D1840 COMPOSITION Total Acidity mg KOH/g Max 0.01 354 D3242 Aromatics % vol Max 22 158 D1318 Sulphur, Total % mass Max 0.30 107 D1266/2622 Sulphur, Mercaptan % mass Max 0.003 342 D3227 Doctor, test 30 D4952
JET FUEL A1 - KAZAKH ORIGIN - FOB ROTTERDAM on DIP and PAY payment terms Initiate the buy process by sending us your LOI upon which we will share our SCO. Following procedure: 1 Buyer sends ICPO in line with seller working procedures alongside his/her Tank Storage Agreement (T.S.A.) on receipt and acceptance of Seller's Soft Offer 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller within its validity 3. Upon receipt and review of the signed C.I., seller issues Dip Test Authorization (D.T.A) to be completed and signed by buyer/ Buyer's logistics in order for Dip Test to be conducted alongside counter-signed copies of the C.I 4. Buyer returns the Dip Test Authorization (DTA) fully completed and signed within its validity and upon successful review of the completed DTA, seller issues the below full POP documents: - A. Fresh SGS Report (Not older than 72 hours); B. Product Reservoir Receipt; C. Accreditation Certificate; D. Product Passport (Quantity and Quality Analysis); E. Authorization to Sell and Collect Certificate (ATSCC); F. Pre-Injection Report (PIR); G. NCNDA/IMFPA (To be completed by all intermediaries); H. Certificate of Product Origin; Authority to Verify (ATV) either physically or otherwise. 5. Upon receipt and confirmation of the above POP Documents, Buyer provides its testing officials (SGS or INTERTEK) and the needed test are carried out on the product in seller's tanks; 6. Buyer upon successful Dip Test makes full payment by MT103 / TT wire transfer for the total product and Seller pays commission according to NCNDA/IMFPA to all intermediaries involved in the transaction within 24 hours after confirmation of buyer's payment and injection commences immediately. 7. Seller issues a contract for buyer's desired duration upon successful completion of the trial order.
FOB ROTTERDAM | JET FUEL A1 | Non-Sanctioned origin | Only with SBLC or BG
VDA-certified AdBlue from European EU manufacturer Available in 1.000l IBC container, 10l canister, 210l barrel and 25.000l tank truck For the offered AdBlue�?�® applies: MOQ: one complete truck load / Full Truck Load Delivery time Germany: 2 to 4 working days Delivery time Austria: 3 to 5 working days EU goods VDA certified manufacturer All analyses & certificates available Payment Terms: Prepayment Payment by Paypal with 3% fee acceptance possible Incoterms: EXW or DDP Conclusion of framework agreements for the purpose of securing free contingents possible
Jet A-1 is a kerosene grade of fuel suitable for most turbine engined aircraft. It is produced to a stringent internationally agreed standard, has a flash point above 38 degree Celsius and a freeze point maximum of -47 degree Celsius. It is widely available outside U.S.A. Jet A-1 meets the requirements of British specification DEF STAN 91-91, ASTM specification D1655 and IATA Guidance Material (Kerosine Type), NATO Code F-35. Our Jet Fuel A-1 specification: Minimum order: 100,000 MT=1 million barrels CIF to your destination. Price: $85/ barrel USD. Client needs to send LOI, BCL, and his TSA to initiate a transaction. Limited Time Special Send in your LOI from now to February 25 entitled you to a special price of $75/barrel USD
Transformer oil is a mineral insulating or cooling oil derived from crude petroleum. It is a mixture of various hydrocarbons consist partly aliphatic compounds These are the petroleum products, like Napthenic based transformer oil and Paraffinic based transformer oil. Napthenic based transformer oils are known for their heat distribution, which is one of the main problems with transformer. This also has a good flowing feature under low temperature and it is wax-free. These type of oils are better for low-temperature. Even though it oxidises easier, the product formed by this process (i.e sludge) is soluble. Hence, it won't obstruct the cooling system of the transformer. Paraffinic based transformer oil is obtained from paraffinic crude oil using solvent separation methods. This is known for its good thermal and oxidation durability and good high temperature viscosity feature. Because of its high viscosity index due to the presence of wax, though the oxidation rate is lower than the napthenic oils, the precipitant or the sludge is formed due to the oxidation. This might become an obstruction for the heat dissipation. Packing : 20 MT flexi bags & in Mild steel drums Offered in : FOB/ CIF / CFR basis in USD / EURO International approvals : DOBLE , LABORELEC TEIAS, TNB , BHEL , SAUDI ELECTRIC , ABB , SIEMENS Sample : Available on customer request Grades available : IEC 60296 , IEC 296 class 1 , IS 335 Payment terms : LC at sight , Advance by TT
Light liquid paraffin oil / White Mineral Oils - Pharma grade are severely Hydro treated Base Oils, ranging from low viscosity to very high viscosity grades. All products and processes comply to National & International Standards and Pharmacopoeias such as IP, BP, USP & EP. The product is also approved and certified by GMP ,KOSHER , HALAL , ISO , NSF , FDA lndia. White Mineral pils are used as a blending base for Pharmaceutical such as creams, lotions, hair oils, petroleum jelly, ointments, laxatives etc. It also find application in many other industrial segments such as polystyrene manufacturing, food packaging industries, protective coatings for fruits and vegetables, food preservatives, veterinary preparations etc. Product is offered in HDPE Drums / IBC and bulk Flexi bags or ISO tanks Global customers/ importers are offered in USD on FOB ,CIF ,CFR basis. We are one of the premier Manufacturer & Exporter & export to more than 60 countries worldwide
White petroleum jelly, soft paraffin or Vaseline. Petroleum jelly has excellent hydrating characteristics and forms a sealing barrier on dry and damaged skin, which locks the moisture and helps in speeding up natural recovery process of the skin. This generates high demand for petroleum jelly in pharmaceutical and cosmetics industries
Light liquid paraffin oil / White Mineral oil - Technical grades represent the Technical White Oils with slightly different test requirements and are developed for applications in polymers, plastic industries and animal feeds besides certain non-critical applications in packaging and food machinery lubrication where minimal food contact is expected. Technical.grades are available in all viscosity grades starting from 8 cSt @ 40 deg C to 100 cSt @ 40 deg C and with pour points ranging from -5 to -30 deg C.
HEAVY LIQUID PARAFFIN OIL ( Technical & Pharma grade available) . Heavy Liquid Paraffin Oils produced from severely refined hydro cracked / hydro treated base oil with high degree of purity to meet IP / BP / USP specifications have excellent oxidation / UV stability. These oils are suitable for Pharmaceutical, Cosmetics and Food Industries for Direct & Indirect Food Contact.
Fuel oil, also called furnace oil, fuel consisting mainly of residues from crude-oil distillation. It is used primarily for steam boilers in power plants, aboard ships, and in industrial plants. Commercial fuel oils usually are blended with other petroleum fractions to produce the desired viscosity and flash point.
Dear sir We, Athena Minerals and metals corporation are ready and able to buy the following commodity in the quantity as specified in the terms and conditions as stated below; .Product:Jet A1, Colonial Grade 54 Origin: Russia Quantity:Max 2.0 mio bbl Contract: spot Delivery Port: Rotterdam product in tank storage Payment:MT103 after SGS REPORT NO UPFRONT PAYMENT NECESSARY Price: Platt Rotterdam, Discount minus 6 USD TO THE BUYER. Kindly confirm Thanking you Shajeev cp 00919840428182
UCO for Biodiesel.
Automotive parts and engine oil..Shipping/ forwarding.
AVIATION FUEL, D2 DIESEL, EN590 10PPM, DIESEL 50PPM, MAZUT M100, D6, LPG, LNG, ESPO, LIGHT CYCLE OIL, BITUMEN 40/50, 60/70, 80/100, 85/100. Rice, Sugar, Icumsa 45
Origin: Kazakhstan The detailed specification: Meets all International Standards Total Spot quantity order: 2.000.000 BARRELS The price and discount: - FOB ROTTERDAM: DISCOUNT $4 PER BARREL FROM NWE PLATTS CODE LINE â??PJAAV00â?? Shipment: - TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per conditions in Seller`s FCO Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via MT103 Payment Procedure: According to the terms of the contract, to be mutually agreed upon by Buyer & Seller. Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST
Mazut is a heavy, low quality fuel oil, used in generating plants and similar applications. In the United States and Western Europe, mazut is blended or broken down, with the end product being diesel. Mazut may be used for heating houses in the former USSR and in countries of the Far East that do not have the facilities to blend or break it down into more conventional petro-chemicals. In the West, furnaces that burn mazut are commonly called "waste oil" heaters or "waste oil" furnaces. Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75 (not active), GOST 10585-99 Oil fuel. Mazut is almost exclusively manufactured in the Russian Federation, Kazakhstan, Azerbaijan, and Turkmenistan. This product is typically used for larger boilers in producing steam since the energy value is high. The most important factor when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a dirty oil product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil (Bunker C), and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.
Jet Fuel A1 is a specialized type of kerosene designed for use in aircraft powered by gasturbine engines It meets stringent international specifications ensuring optimal performance and safety for aviation applications Primary Characteristics Appearance Clear to strawcolored liquid Odor Characteristic petroleum or kerosene odor Density Typically around 080 kgl at 15C Flash Point Minimum of 38C 100F Freezing Point Maximum of 47C 53F Specifications Jet Fuel A1 adheres to the stringent international standards set by organizations like ASTM American Society for Testing and Materials and DEF STAN UKs Defence Standard Applications Civil Aviation Preferred fuel for commercial airlines and most civil aircraft Military While some military aircraft use Jet Fuel A1 others might utilize specialized fuel blends Advantages Stability Resistant to thermal breakdown ensuring safe operations in hightemperature environments like jet engines Purity Contains minimal contaminants reducing the risk of engine deposits Low Freezing Point Suitable for highaltitude flying where temperatures can be extremely cold
Gasoil, often referred to as diesel oil or simply diesel, is a middle distillate derived from the crude oil refining process. It possesses properties between those of lighter fuels like gasoline and heavier fuels like lubricating oil. Gasoil is used as both a fuel and a processing element in various industries. Primary Characteristics: Appearance: Clear to slightly hazy, ranging in color from light straw to amber. Odor: Characteristic petroleum smell. Density: Varies based on specific grade and blend but generally denser than gasoline. Cetane Number: Indicator of the combustion speed of diesel fuel and compression needed for ignition. Specifications: Gasoilâ??s quality and classification often adhere to standards set by organizations such as ASTM (American Society for Testing and Materials) or equivalent regional standards. Variations include Ultra-Low Sulfur Diesel (ULSD), Low Sulfur Diesel, and others. Applications: Automotive: Fuel for diesel-engine vehicles, such as trucks, buses, and cars. Industrial: Used in various industrial machines and engines, including generators. Marine: Fuel for certain types of marine vessels. Heating: Used in some regions as heating oil for homes and businesses. Power Generation: Fuel for diesel-powered electricity generators. Advantages: Energy Dense: Provides more energy per gallon compared to gasoline, leading to longer fuel economy in diesel engines. Efficient: Diesel engines often convert fuel to energy more efficiently than their gasoline counterparts. Reliable: Known for its durability and reliability in heavy-duty applications.
