Mazut is a heavy, low quality fuel oil, used in generating plants and similar applications. In the United States and Western Europe, mazut is blended or broken down, with the end product being diesel. Mazut may be used for heating houses in the former USSR and in countries of the Far East that do not have the facilities to blend or break it down into more conventional petro-chemicals. In the West, furnaces that burn mazut are commonly called "waste oil" heaters or "waste oil" furnaces. Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75 (not active), GOST 10585-99 Oil fuel. Mazut is almost exclusively manufactured in the Russian Federation, Kazakhstan, Azerbaijan, and Turkmenistan. This product is typically used for larger boilers in producing steam since the energy value is high. The most important factor when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a dirty oil product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil (Bunker C), and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.
Naphtha is a flammable liquid made from distilling petroleum. It looks like gasoline. Naphtha is used to dilute heavy oil to help move it through pipelines, to make high-octane gas, to make lighter fluid, and even to clean metal. It is a liquid petroleum product that boils from about 30�°C (86�°F) to approximately 200�°C (392�°F), although there are different grades of naphtha within this extensive boiling range that have different boiling ranges. The term petroleum solvent is often used synonymously with naphtha. On a chemical basis, naphtha is difficult to define precisely because it can contain varying amounts of its constituents (paraffins, naphthenes, aromatics, and olefins) in different proportions, in addition to the potential isomers of the paraffins that exist in the naphtha boiling range. Naphtha is also represented as having a boiling range and carbon number similar to those of gasoline a precursor to gasoline.
MARINE GAS OIL (MGO) describes marine fuels that consist exclusively of distillates. Distillates are all those components of crude oil that evaporate in fractional distillation and are then condensed from the gas phase into liquid fractions. Marine gasoil usually consists of a blend of various distillates.
Heavy Fuel Oil (HFO) is a residual fuel incurred during the distillation of crude oil. It is primarily used to generate motion and/or heat that have a particularly high viscosity and density. Mainly used in industrial boilers and other direct source heating applications. It is also used as a principal fuel in marine applications and large diesel engines. Generally HFO typically includes bitumen, asphaltenes and long chain polycyclic aromatic hydrocarbons.
Aviation Kerosene Colonial Grade 54 Jet Fuel JP 54: Jet fuel A-1. Jet fuel designed for use in aircraft powered by gas-turbine engines. It is clear to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1 are produced to a standardized international specification.
Speciality The products offered by Matr Consulting are 3 wide range of Industrial Lubricants, Automotive Lubricants & petroleum. Products with standard specifications are made by reputable companies and delivered to us. These products are prepared and delivered to the customer based on the type of customer request. All financial payments are in cash Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. Unlike petrochemicals, which are a collection of well-defined usually pure organic compounds, petroleum products are complex mixtures. The majority of petroleum is converted to petroleum products, which includes several classes of fuels Lubricants (produces light machine oils, motor oils, and greases, adding viscosity stabilizers as required), usually shipped in bulk to an offsite packaging plant
JET FUEL A1 The gold standard in aviation fuel, Jet A1 is renowned for its purity and reliability. Meeting stringent international standards, it powers aircraft worldwide with optimal performance and safety, making it the preferred choice for airlines and military operations. Delivery Terms: CIF / FOB Shipment. Payment Term: MT103 TT Wire Transfer. Quality : Q&Q test report will be conducted at the loading port by SGS equivalent at the expense of the seller. Products Origin: KAZAKHSTAN. Contract Term: 12 Months minimum after first successful trial (with rolls and extensions). PORT OF LOADING: JURONG PORT, SINGAPORE, AKTAU, PAVLODAR, KURYK, FUJAIRAH, VLADIVOSTOK, ROTTERDAM AND HOUSTON.
We are the serious supplier. I have 10 Millions MTs available in Rotterdarm/Hoston port every month now. If you are interested in it, we can discuss more details. Quantity MIN 2 Million MT per months * Origin: Kazakhstan, Russia Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: The price we can discuss. Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months or more with possible rollovers. * Inspection: SGS or similar
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
**Professional Fuel Supply Offer** **Product:** - DIESEL, GAS , OIL , EN590, JET A-1, D1 , D2 D-6 - Monthly Quantity: 50,000 MT - 10,000,000 MT **Pricing:** - Prices: Negotiable - CIF terms available - EN590 FOB - Jet A-1 Fuel FOB - D1 FOB - D2 FOB - D6 FOB **Contact Information:** WhatsApp: +17705881989 WeChat: +14043768928 Email: wpaul@pbwmanufacturing.com **Requirements for Proceeding:** - Buyer to issue Irrevocable Corporate Purchase Order (ICPO) along with company Certificate - Buyer must have TSR **Storage Information:** - Fuel is stored at Vopak and Kinder Morgan, renowned Tier 1 Tank Storage Facilities in Rotterdam, Houston, Fujairah, Duqum, and Qatar. . TTT Procedure for FOB Dip and Pay, Rotterdam Port (E-tank / Non-negotiable) 1. Initial Steps: The buyer issues an Irrevocable Corporate Purchase Order (ICPO), company registration certificate, data page of the buyer's passport and an Authorization to Verify (ATV) the Tank Storage Agreement with the E-Tank provider. (Proof of funds will be waived if the ATV is successful.) 2. TSA Verification, CI and DTA: The seller verifies the TSA and upon successful verification, issues the Commercial Invoice (C.I). The buyer signs and returns the CI to the seller within 48 hours. The seller will also issue a DTA ( Dip Test Authorization) to be endorsed by the buyer and buyer's tank farm. 3. Proof of Product and Injection Schedule a. Injection Schedule: The seller releases the injection schedule to the buyer and the buyer's tank farm company. The buyer and their tank farm must sign and return these documents to the seller within 48 hours. b. Proof of Product (POP) Documents: Concurrently, the seller issues the following documents to the buyer: (a) Fresh SGS report (b) Product Passport (c) Injection Report (d) Unconditional DTA (e) Authorization to Sell and Collect (ATSC) (f) AuthorizationtoVerify(ATV) Option A �¢?? seller injects fuel into the buyer�¢??s tank. 4. Tank Storage Receipt: The buyer�¢??s tank storage company will issue a TSR for at least 5 days. The Lessee�¢??s name will include both the Buyer and the Seller. The refinery�¢??s name will also be included. 5. Injection of product into Buyer�¢??s tanks: Upon Buyer�¢??s confirmation of the POP documents in clause 5, Seller will commence injection of product into the Buyer�¢??s tank. 6. Dip Test: The Buyer is responsible for ordering SGS to conduct a dip test of the product in the Buyer�¢??s tank at the Buyer's expense. 7. Payment and Delivery: Following a successful SGS dip test, the Buyer must make a 100% payment via MT103/TT wire transfer for the total product within forty-eight (48) hours. The Seller will pay commissions to all intermediaries involved in the transaction within forty-eight (48) banking hours after confirmation of the Buyer's payment.
En590, jeta1 and d6.
Jet A1
Kazakhstan origin aviation fuel, Jet Fuel A1 direct from Kazakhstan refinery available. Tank to tank transaction in Rotterdam port or Houston port. Minimum order quantity is 1 million barrels. Very competitive price offer by refinery
We have direct contacts with several refineries and can therefore offer any type of fuel..( Jet Fuel , D6 ,EN590 ..etc..) at good market prices. If you have any questions, please contact me via Whatsapp or by mail. NON-Russia..
Fuel oil ( containing some solvent) Fuel oil ( free from solvent) Diesel off spec ( Dark color) Diesel off spec ( mild yellow color)