White cement paint colors
Waterproof cement paint used for exterior and interior decoration for walls, its main ingredient is white cement, it is available in different shades, it can long lost for 2 to 3years on exterior walls and 3 to 4years on interior walls
25 kg laminated gunny pack/polythean bag (17"x27")
Rust preventive dipping compound
Complete and permanent solution for rust prevention. Also helps in preventing minor damages on the component due to its protective coating.
Resist-a-flame
Water soluble, non-toxic spray-on, brush-on, roll-on fire coating for all substrates - inhibits flame spread and smoke development with an astm e19 & e84 a-rating. Lab tested to 1800+ degrees.
25 & 50 lb bags of granular material to be mixed with hot water @ 4.5 lbs per gallon
Anti corrosive paint
Based on epoxy modified phenolic having good resistance to solvents, water, saline atmosphere, resistance to mild acids, alkali and chemicals. It is suitable for pipelines structures inside chemical factories, under frames of railway coaches, frames of lorries and buses, jetties, marine installations, barrage gates
Colour:
Selected colours
Viscosity:
80 +/- 10 in ford cup b-4
Solids:
45 +/- 2
Coverage:
9-10 sq mts. / ltr/coat
Drying time:
Surface dry 4-6 hr.
Hard dry:
32 -48 hr.
Full curing in:
7-8 days
Flash point :
Above 30 c
Recommended dry film thickness:
15 to 20 microns
Method of application:
Brush/dip/ spray
Thinner:
P-71
Cross cut adhesion:
Passes
Bend test 1/2":
Passes
Resistance to salt spray test:
Passes 150 hr. Test
Surface preparation mild steel surface:
Requires wire brushing or acid pickling followed by phosphating. After surface preparation polyvar-rop - 701 is applied for best results
For marine application & chemical atmosphere
Polycoat -rop 801 epoxy primer can be used.
Heat resiting paint
Based on heat resistant silicone resin medium with aluminum pigment for protection of steel at high temperature up to 650°c
Gives brilliant lustre with excellent weather resisting properties.
Colour:
Aluminum
Solids:
48± 2
Coverage:
9-10 sq mts. / ltr/coat
Drying time:
Dust free in 4-5 hours recoat after 24 hours or heatinh at 225 for 1 hour.
Flash point:
Above 30° c
Recommended dry film thickness:
15 to 20 microns
Method of application:
Brush/spray
Thinner
P-73
Storage life:
6 month
Surface preparation:
Mild steel surface
Requires wire brushing or acid pickling to get an absolutely clean metal surface free from rest.
Precaution:
Not to be used in areas of high acidity or alkalinity
Does not cure and remains soft until temperature reaches 200°c
At the time of application metal must be at room temperature
Avoid applying thick coat since that may cause blistering.
Uses:
In industry for painting chimney stocks, exhaust sustems
Copal varnish is made from wood rosin(biroza) & finds its application in industries like paint, polishes
Basically used for giving a shining look on wood, glass, ceramic surfaces.
Winstrip KAL 1200 cold paint stripper "PH 12-14 strongly alkaline"
Specially developed for modern powder coatings.
Can be used at temperatures up to approx. 35�°C. (The product evaporates more quickly at higher temperatures)
The product is ideal for parts made of iron, steel, aluminum, zinc, chrome, etc.
Call us and we will be happy to advise you
Winstrip 2 phase hot paint stripper Alu B
Size
5 litres
10 litres
25 litres
200 litres
Winstrip 2-phase hot paint stripper "for aluminum" Phase B "PH 10-12 alkaline"
Highly alkaline hot paint stripper. Used in the dipping process.
Very quickly removes dried KH, nitro and 2-component paints.
Suitable for removing paint from aluminum and metal parts.
Optimal effect at 40-80C, ideal for paint stripping systems.
Call us and we will be happy to advise you
Winstrip 2-phase hot paint stripper "for aluminum" Phase A "PH 10-12 alkaline"
Highly alkaline hot paint stripper. Used in the dipping process.
Very quickly removes dried KH, nitro and 2-component paints.
Suitable for removing paint from aluminum and metal parts.
Optimal effect at 40-80�°C, ideal for paint stripping systems.
Call us and we will be happy to advise you.
Protects metal from tarnishing, for painting or spraying, for indoor and outdoor use.
Size
750ml
5kg
Protects metal from tarnishing, for painting or spraying, for indoor and outdoor use. Zapon varnish is a colorless, non-yellowing protective coating for all bare iron and non-ferrous metals. The original appearance of the surface is not changed.
Low-odor and colorless primer. Highly alkali-resistant, for solidifying mineral substrates and for promoting adhesion for subsequent coats.
Size
5 litres
10 litres
25 litres
Low-odor and colorless primer. Highly alkali-resistant, for solidifying mineral substrates and for promoting adhesion for subsequent coats of paint. Works as a pore-spanning and sealing agent for highly absorbent substrates. On concrete, sandstone, cement, sand-lime brick, Eternit, plaster, etc. (Strongly crumbly substrates cannot be solidified.
Fast-drying, water-clear and easily sandable wood primer for all hard and soft woods indoors.
Size
750ml
5 litres
25 litres
Fast-drying, water-clear and easy-to-sand wood primer for all hard and soft woods indoors. The pores are sealed so that the subsequent varnish has better filling properties. Protects the wood from moisture and prevents the varnish from sinking. For all wood and wood materials.
Winoil solvent-based insulating primer for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc.
Size
1 kg
5kg
10kg
20kg
Winoil insulating primer based on solvents for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc. Can be used as a primer outdoors. Wood can be insulated against the penetration of the wood's ingredients. Winoil insulating primer can be painted over with any conventional solvent-based or emulsion paint. Can be painted over after approx. 20 minutes. Color: White
Colorless special adhesion promoter (primer) for almost all types of plastics. Transparent for subsequent painting. Sand plastics and prime once with primer spray.
Well-adhering cutting oil foam for targeted application to the area to be worked on. Lubricates and cools cutting tools when drilling, thread cutting, turning, milling, sawing, etc. Extends tool life, water-soluble and washable with clean water. Biodegradable, free from chlorine, sulphur and mineral oils
Weight 0.5kg
Size
500ml
6500 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
