Can be applied directly on rusty steel( rust layer ¡ü45um)! Color and appearance: grey or others Coating thickness um: 50¡à5mm Solid content % : 69¡à3% Overcoating interval: minimum: 4 hours max: unlimited Recommended substrate conditions and temperature: 1.Remove all oil or grease, soluble contaminants and other foreign matter. All surfaces to be coated should be clean, dry and free from contamination. 2.If applied on the rusty surface, the rusty layer thickness should be below 45 um 3.Apply in good weather, don¡¯t let coating contact any liquid like water or other solvent before completely dry. No painting be carried out in rainy day outdoor , if the humidity is above 85%, please stop painting 4.The temperature of substrate should be above 5¡ãc, lower temperature might not dry or cause a long time to dry Air spray:nozzle orifice: 1.5-2.5mm Nozzle pressure: 0.3-0.5mpa Airless spray:nozzle orifice: 0.4-0.5mm Nozzle pressure: 12-15mpa Brush : use soft bursh Recommended finish: rsl series finish Shelf life: 12 months Over coating time Substrate Temperature 5¡ãc 15¡ãc 25¡ãc 35¡ãc 45¡ãc Minimum interval 24hrs 7hours 4hours 3hours 2hours Maximum interval Unlimited storage temperature : 5-30¡ãc in well ventilated warehouse 20l/barrel or 20kg/barrel
Hjsil 150 Characteristics Hjsil150 is a hydrophilic fumed silica with a specific surface area of 150 ©o/g. It is a kind of high purity white colloidal powder. Applications Htv and rtv silicone rubber Adhesives and sealants Paints and coatings Properties Reinforcement filler in elastomers Rheology and thixotropy control of liquid systems, binders, polymers, etc. Used as anti-settling, thickening, anti-sagging agent Improvement of free flow and anti-caking characteristics of powders 3-layer kraft paper bag, 10kg per bag.
Reinforcement filler in elastomers Rheology and thixotropy control of liquid systems, binders, polymers, etc. Used as anti-settling, thickening, anti-sagging agent Improvement of free flow and anti-caking characteristics of powders High transparency 3-layer kraft paper paper bag, 10kg per bag
Pilot pest control 25 ltr.
Aadhya shellac as a leading manufacture , producer, supplier and exporter of shellac, shellac flakes, dewaxed shellac flakes, dewaxed bleached shellac powder, bleached shellac , shellac buttons, seed lac, and other shellac products in india since 2000. Shellac is being used in fruit coating, french polish, varnish, enteric coatings , food coating , confectionery glaze , tablet coating , medicine coating printing ink , wood polish , surface coating, and many more purpose. Cooton bag
Aadhya shellac as a leading manufacture , producer, supplier and exporter of shellac, shellac flakes, dewaxed shellac flakes, dewaxed bleached shellac powder, bleached shellac , shellac buttons, seed lac, and other shellac products in india since 2000. Shellac is being used in fruit coating, french polish, varnish, enteric coatings , food coating , confectionery glaze , tablet coating , medicine coating printing ink , wood polish , surface coating, and many more purpose. Cotton bag
Calcium carbonate - talc powder - kaolin - bentonite
Disposable painting-overall with hood -size s, m, l, xl, xxl -extremely comfortable with elastic sleeves and trouser legs -abrasion resistant, hard wearing, antistatic, breathable fabric. -material is polyester -zipper on the front, hidden Carton
Protects your walls from fungus and humidity, anti-termite, fire resistant, anti-microbial and anti-bacterial. Useful for maintaining cleanliness and hygienic atmosphere in restaurants , hotels, ships, office and residential premises. Kleenkot does not merely inhibit the growth but kills broad spectrum of bacteria on its surface. 20 litres/ 4 litres / 1 litres
Protects surface applications from industrial accidents and operational hazards like fire, corrosion and chemical reactions. Metalkot is heat and abrasion resistant Metalkot retains the gloss on the surface. 20/4/1 litre or kgs.
Protects wooden surfaces from fire and humidity. It is also acid, alkali and water resistant. It is also anti- termite and anti-fungal. 1, 4, 20 litres
Protects furnishings, fabrics, curtains, mattress, coir, uphoistery, draping material, carpets etc against fire. Also useful for clothing Doesn’t affect the colour, texture and flexibility of the fabric. The effect of the coating is retained even after dry cleaning. 20 kg.
Rapid industrial paints Epoxy finishing paints Rapid finishing paints Solvent based epoxy paints Epoxy primer Rapid primer Epoxy shop primer Self leveling epoxy finishing Road marking paint (with chlorine and rubber resin) Synthetic-based anti-rust Ceiling paints Matte plastic paint with silicone Interior paint with silicone and plastic Exterior paint with silicone Silicone based exterior primer Marley pvc adhesive
The equipment adopts the resistance heating in the vacuum chamber, to melt and vaporize the metal wire (aluminum wire) cling to the resistance wire. The vaporized metal molecule deposit on the substrates, to gain the smooth film as well as high reflectivity. Thus the surface of the items can be decorated and beautified. Characteristic: reasonable structure, even film, good-quality film forming, quick pumping speed, the cycle of short, high efficiency and easy operation, low energy consumption and performance advantages of stability. Applied industry: Widely used in automotive, audio and various small appliances, computers, clocks and watches, toys, cell phones, reflective Cup, cosmetics, toys, tableware, sanitary ware, shoe heel, ABS, PS, PP, PC, PVC, PET, nylon, metal, Boli, glass, ceramics, TPU, etc. Electroplating effects: general electroplating-face, dumb-(semi-mute, all dumb), the electroplating process wrinkles, lampworking, raindrops, seven colors Coating color:gold, silver, red, blue, green, purple, multi color, and so on. Coating color: gold, silver, red, blue, green, purple, and so on. All vacuum coating machines are environmental prodection products and sooner or later will replace traditional galvanization industrial. Technical parameter: Mode Dimension ZZ-1200 ZZ-1400 ZZ-1600 ZZ-1800 1200*1400mm 1400*1600mm 1600*1800mm 1800*2000mm Mainly Application Plastic decorative coating , glass decorative coating and protective film coating Film Type Semitransparent film, non-conducting film, gold, silver, red, blue, green, purple, seven color, etc. Power source Type Thermal evaporation power, ion bombard power, RF power Vacuum chamber structure Vertical double/single door, horizontal single door, pump system postposition Ultimate vacuum 8.0*10-3Pa Vacuum system Diffusion pump +Roots pump +Mechanical pump +Holding pump Pump time Pump from atmosphere to 5.0*10-2, 6 minutes Workpiece motion mode Public rotation/Frequency control Control mode Manual/Automatic all-in-one mode, Touching screen+PLC compress air the pressure is 5~6kg. water-cooling system Cool water 5~25 supplier, the flux is 5T/H and the pressure is 0.15~0.25MPa. Features Bright delicate aluminum coating, coating speed, simple operation, equipment stability, and the production of high-grade plastic decoration products indispensable a necessary equipmen flat container
Ceramic gold coating machine can coat tin, tic, zrn, crn, ti, ni, cr, cu and other compounds film, multi-layer super-hard film, nitrogen-doped titanium film and the alloy film, and in a very short time to complete all the machining process, it is a highly efficient multi-functional coating equipment. Technical parameter: Mode Dimension Lh-800 Lh-1100 Lh-1250 Lh-1600 Lh-1800 800*1000mm 1100*1000mm 1250*1500mm 1600*1800mm 1800*1800mm Maily application Metal decorative coating and ceramic decorative coating Coating mode and main confirguration Eight multi-arc targets Ten multi-arc targets Twelve multi-arc targets Twenty multi-arc targets Twenty two multi-arc targets Power source Electric-arc power, filament power, Process gas control Mass flowmeter + electromagnetic ceramic valve Vacuum chamber structure Vertical side opening door, pump system postposition, double water cooling Vacuum system Molecule pump +roots pump +mechanical pump(8.0*10-5pa) Diffusion pump +roots pump +mechanical pump(8.0*10-4pa) Workpiece baking temperature Normal temperature to 350 centi-degree pid control, radiation heating. Workpiece motion mode Public rotation frequency control: 0-20 rotation per minute Measure mode Number display composite vacuum gauge: from atmosphere to 1.0*10-5pa Control mode Manual/automatic/pc/plc + hmi/pc four choice of control mode Remark We can design the dimension of the equipment according to customers special technique requirement. 40gp container per set
Property: 1. Excellent chemical resistance 2. Excellent electric insulativity 3. Excellent adhesive force 4. High degree of hardness - good mechanical property Application used for : 1. Coating metal cabinets, 2. Electric distribution boards, 3. Lighting components, 4. Metal shelves, 5. Air conditioners, 6. Office furniture. Solidifying condition: 20min/180-190 degrees. Trademark: rengui Packing: 20kgs/carton or 25kgs/carton Origin: china Production capacity: 600 tons/month 25kgs/carton, sealed plastic bags with brown carton
Property: 1. Excellent chemical resistance 2. Excellent electric insulativity 3. Excellent adhesive force 4. High degree of hardness - good mechanical property Application used for : 1. Coating metal cabinets, 2. Electric distribution boards, 3. Lighting components, 4. Metal shelves, 5. Air conditioners, 6. Office furniture. Solidifying condition: 20min/180-190 degrees. Trademark: rengui Packing: 20kgs/carton or 25kgs/carton Origin: china Production capacity: 600 tons/month 25kgs/carton
Property: 1. Excellent chemical resistance 2. Excellent electric insulativity 3. Excellent adhesive force 4. High degree of hardness - good mechanical property Application used for : 1. Coating metal cabinets, 2. Electric distribution boards, 3. Lighting components, 4. Metal shelves, 5. Air conditioners, 6. Office furniture. Solidifying condition: 20min/180-190 degrees. Trademark: rengui Packing: 20kgs/carton or 25kgs/carton Origin: china Production capacity: 600 tons/month 25kgs/carton
Plative PLP4500 plating layer protective paint Brief description Plative PLP4500 plating layer protective paint, is designed to protect the plating layer by improving abrasion resistance, scratch resistance, chemical corrosion resistance, insolation and heat stability. The paint of transparent has no effect on the color of plating layer, besides the paints of colorful can make the plating layer with different coloration. Operational guidance Prefabricated, diluted plative PLP4500 to a proper consistency and add 15% -25% to total plative SN30, mix completely. Clean and dry the plating layer, make sure no oil, no dust. To paint the layer with prepared paint by spraying, immersion or drawing. Then forced dry at 120 ¡æ in 50 minutes, or air dry in more than 12 hours. Annotation Before use, low-speed mixing of plative PLP4500 is required; dilute the product with special solution alative PLP4500, or else it could lead to paint deterioration. Plative PLP4500 plating layer protective paint brief description Plative PLP4500 plating layer protective paint, is designed to protect the plating layer by improving abrasion resistance, scratch resistance, chemical corrosion resistance, insolation and heat stability. The paint of transparent has no effect on the color of plating layer, besides the paints of colorful can make the plating layer with different coloration. operational guidance Prefabricated, diluted plative PLP4500 to a proper consistency and add 15% -25%to totalplative sn30, mix completely. Clean and dry the plating layer, make sure no oil, no dust. To paint the layer with prepared paint by spraying, immersion or drawing. Then forced dry at 120 in 50 minutes, or air dry in more than 12 hours. Annotation Before use, low-speed mixing of plative plp4500 is required; dilute the product with special solution alative PLP4500, or else it could lead to paint deterioration.
Plative DPP3800 deplate protective paint Brief description Plative DPP3800 deplate protective paint, the paint is prepared from a special process with special resins, special solution and other materials. Specific features are no affect on plating coat, acid and alkali resistance, against corrosion, and so on. Commonly used in deplating process where can protect the plating coat from damage. The plating coat such as aluminum, nickel, copper, tin, chrome and so on. Operational guidance First, to clean and dry the plating layer, make sure no grease, no dust. Second, to paint the surface where prevent from being processed next (alative DPP3800 can be used to dilute the product). Then forced dry at 70 before deplating. After deplating, the coating can be cleaned or not, with special cleanser. Annotation Before use, low-speed mixing of plative dpp3800 is required; dilute the product with special solution alative dpp3800, or else it could lead to paint deterioration.
