Corrugated Board production line is comprise of Mill roll stands for medium, liner, Pre-heaters, Single Facers for A-B-C-E flute, delivery units, Glue Units, Drying sections with cooling systems, slitting, creasing, cut-offs, and stacker. We can produce the three plyíófive ply and seven ply corrugated production line. Widths from 1400 to 2500mm, production speeds from 60-250 meters/min. Customerí»s specific needs catered for by experienced Corrugated Company. We can supply a complete corrugator or individual parts to complement your own line
Corrugated Board production line is comprise of Mill roll stands for medium, liner, Pre-heaters, Single Facers for A-B-C-E flute, delivery units, Glue Units, Drying sections with cooling systems, slitting, creasing, cut-offs, and stacker. We can produce the three plyíófive ply and seven ply corrugated production line. Widths from 1400 to 2500mm, production speeds from 60-250 meters/min. Customerí»s specific needs catered for by experienced Corrugated Company. We can supply a complete corrugator or individual parts to complement your own line
1. Computer order storage and adjustment, faster order update and convenient operation.
2. Complete machine wallboard and other important pieces are all made by high precision process center and grinded by digit-controlled grinder.
3. All the transmission axle and rollers are made of high-quality steel with high-precision dynamic balance, plated with rigid chrome and grinded surface.
4. The transmission gear adopts the high-quality steel, which is grinded after heat-treatment, after long use, it still maintains the high topping precision.
5. The main machine transmission parts adopt the hand-free connection ring to eliminate the interval, suitable for long-term high speed printing.
6. The whole machine undergoes the spray lubrication and is equipped with engine oil automatic balance facilities.
7. It possesses the print, die-cutting, slotting memory function, which could return to Zero and Re-set automatically.
8. PCLINK control network, MCGS software, Siemens low voltage electric appliance and host frequency conversion control, 30% electricity saving.
9. Double axle slotting to configure whole machine production management computer control system and single axle slotting to configure whole machine production management computer control system
Optional: remote computer diagnosis system
Flute profiles: AíóBíóCíóE etc. available discretionarily.
Drive decelerate box adopts oiliness lubricate. light noise, adopt small gimbal transmission. separate power.
Lift-lower of upper corrugating roller, pressure roller and gelatinizing roller are completed by pneumatic control.
Cardboard transmitting method adopts vacuum equipment, with wind control. keep flute profiles stable of the lower-roller in the condition of running up.
Axletree of corrugated and pressure roller adopts high temperature resistant lube.
Gelatinizing parts auto supply glue circularly.
The upper-lower corrugating roller are made of high quality chrome molybdenum alloy steel and heat-treatment. The rigidity is HRC55-62,the surface are whetted.
The glue part surface are treated by special mesh snicked and chromeplated.
Adopt Electromotion or handle separate glue equipment.
Glue part can be running independently and non-independently while stopped. Adopt main motor
YHA Automatic Pillow Type Packaging Machine
Applications:
Suitable for packing instant noodles, chocolate,ú¼biscuits, soaps, snow-biscuits, frozen foods and solid matter, etc.
Features:
Design of machine is reasonable, which makes the operation easy and convenient.
Function of automatic stop at fixed position
Function of digital indicator which shows the size of the film, packing speed , capacity and temperature , etc.
PLC to be adopted reduces the mechanical contact and makes the system more stable ,reliable and easier to maintenance
The inverter is convenient and simple to adjust the motor speed.
The photo sensor is used to test marks, and control the double -tracing without contact.
Fittings:
Printer; Air Switch
PLC----OMRON (Japan)
Photo Switch----OMRON (Japan) BANNER (America)
Converter----PANASONIC (Japan)
Switch (earth leakage protection) ----FUJI
Solid-state Relay----XUANRONG (TAIWAN)
Button Switch: KUN HUAN (South Korea)
Simple structure, high automation, high speed and stable operation
Double-drive long sealer and automatic switch structure
Center height of the end sealer can be adjusted with the height of packing items
Feeding position can be adjusted at any time during operation
Low noise, light vibration and easy maintenance
Electrical features:
Intellectualized, digital servo motor control system
Operating status, parameters and malfunction can be set and displayed through the lcd screen
Frequency control, convenient, accurate and reliable
Color mark tracking point can be positioned and tracked automatically
Length of packing bag can be measured and memorized automatically
Capacity: 50 to 200 packs/minute
Bag size:
Length: 70 to 400mm
Width: 30 to 150mm
Height: 5 to 88mm
Floor space (l x w x h): 5, 400 x 1, 020 x 1, 750mm
Power consumption: 4.56kw
Net weight: 1, 000kg
Features:
1.Provided with the functions as adjusting the regular & irregular paper folding quickly.
2.Adjusting the size of standard and non-standard paper.
3.Provided with top quality acicular bearing, which extended the service life of machinery.
4.Quickly adjusting the thickness of various pieces of paper.
5.Attached with paper-feeding pressure adjuster. Therefore, smooth paper feeding could be guaranteed.
6.Provided with new style width paper feeding roller, which ensure the accurate paper folding.
7.Attached with velocity-adjuster for paper folding.
8.Attached with automatic permutation paper collector. Therefore, ordered paper collecting is achieved.
9.The machine could be mounted with line pressing wheel, dotted line wheel and tangential wheel.
1.Dt-280 belt coding machine can use together with vertical packaging machine and horizontal packaging machine, it can be used in intermittences coding such as power, tablet, liquid, particle and etc.
2.It can print date of production, lot number; this machine takes the motor journey switch and touches off controlling by itself. It is applicable for many kinds of packing materials such as plastic, leather, cloth, paper and etc.
Name: 12 tracks stick sachet granule packing machine
Model: dxd-6012kb
Bag style: rear-center sealed, stick sachets
Bag size: l30-140mm single lane film width:30-60mm
Capacity: 480bags/min
Control style: adopt advanced plc controlling system and conveniente touch screen.
Pneumatic request:0.24cbm/min, 0.6mpa
Voltge:a c380v 3 phases 50hz
Power: 6.5kw
Weight:g.W 850kg
Demension :l120 w240 h260 cm
Functions:this 12 tracks stick sachets granule packing machine, with high capacity and reliable quality, adopts advnced plc system and conveniente touch screen, easy to operate and maintain, it can automatically make bags, weigh, fill, seal, cut, print codes etc. They can be used to pack all kinds of granules or grains, such as, coffee, sugar, salt, seasoning, pepper, desiccant powder, etc.
As the upgrade model of dt-430, dt-530n boasts such features as micro-computer control, automatic temperature adjustment and accurate printing & counting.
The printing position could be set through the input of numbers: the printing position could be freely set within the scope of 0001-5000ms.
Output pre-set: the output could be set within 1-99999. Meanwhile, the acousto-optic is also available.
Friendly operate: humanized design, pvc film introduced on the control panel, soft touch on the 9 keys and open-and-shut 6-digit led.
Malfunction self-test: it is equipped with 5 indicator lights such as operation, heating, character printing, position and pre-set, so as to reflect various operation conditions of the machine.
Easy maintenance: each electric equipment introduces the plug-and-play connector so as to conduct the upgrading conveniently.
Automatic sleeve wrappe &pe thermal shrink packaging machine
1. Up and down magnetic switch control system to prevent the mistake of sealing and protect the operate meanwhile
2. Schneider programmable logic controller (plc) with stable performance
3. Schneiderac contractor, intelligent temperature control
4. Large power conveyor motor, stepless speed regulating, ensure smooth feeding
5. Up and down large power fan system to ensure the excellent effect of shrinking in one time
6. Super cooling system to ensure the perfect shape of products quickly after shrinking
Sutiable for packing line with limited space
Save time, labor & space.
Top & bottom wrapping sensored by photoelectric detection, 2 sets of safety protection switches to protect both machine and the operator.
Ideal for wrapping light and loose pallet loads.
Wrapping size l1300 x w1300 x h2100 m/m
(diagonal 1800m/m)
Capacity 2.5t
Wrapping speed 0~5m/min adjustable
Pe size core doa 76m/m
Pe thickness 15u~35u
Machine size l1900 x w600 x h2200 m/m
Machine weight 135kg
Automatically folds top, bottom and side flaps speedily and smoothly
Driven by 4 sets os belts: top, bottom and sides.
Adopts pneumatic pressure to fold side flaps, which makes folding easier.
Easy to operate, standard components available.
Custom design available.
Power supply 110/220v , 50/60hz , 1phase
Carton size l200~600 , w150~500 , h150~500 mm
Sealing capacity 1~15 cases/min
Tape width 2"(2 1/2" , 3" optional)
Table height 630mm (adjustable range 600~700mm)
Air pressure 5 kg/cm2
Weight 260kgs
Size l1680 x w810 x h1640 mm
Movable, compact, and easy mobility.
No forklift required during operation.
Top & bottom wrapping sensored by photoelectric detection, 2 sets of safety protection switches to protect both machine and the operator.
Wrapping size l1300 x w1300 x h1600 m/m
(diagonal 1800m/m)
Capacity 2000kg
Wrapping speed 0~5m/min adjustable
Pe size core dia 76m/m
Pe thickness 15u~35u
Machine size l1900 x w2000 x h2150 m/m
Machine weight 159kg
Movable, compact, and easy mobility.
Save time, labor & space.
Top & bottom wrapping sensored by photoelectric detection, 2 sets of safety protection switches to protect both machine and the operator.
Ac/ad power supply(fully charged battery can wrap 45 pallets).
Wrapping size l1300 x w1300 x h1600 m/m
(diagonal 1800m/m)
Wrapping speed 0~5m/min adjustable
Pe size core dia 76m/m
Machine size l1690 x w1020 x h2180 m/m
Machine weight 250kg
It is suitable for the combined sealing packing for capsules, tablets and food, chemical industrial products and electronic components etc.
Punch frequency: 30times/min 1 sheets/times
Capacity: 20-40 thousand pcs/h
Stand. Sheet: 80X57mm (or as request of customer)
Packing material
PVC hard piece: Width 50~105mm Thickness 0.25mm
PTP Aluminum foil: Width50~105mm Thickness0.02mm
Power: 220V 50HZ 1.8Kw
Overall dimensions:900X500X900mm
Net Weight: 175kg
Exported wooden case 1 case
size: 1000X600X1000mm
Weight: 200KGS
PLC
Photo-eye auto-height sensing pallet height
Separate top ,bottom & up-down Wrap Counter Selector
Overwrap time is set to create an overwrap
Reinforce wrap times is set to better secure 2 loads placed on top of each other
Film Tension Control adjustment on the panel
Separate start, pause and emergency stop buttons
Power indicator
Manual carriage up/down
Variable Turntable Speed
Carriage up/down speed control
Manual/automatic exchangeable
Turntable
1650mm diameter structural steel plate
85mm height floor to top of turntable
Turntable drive
0-12rpm variable turntable speed by frequency changer
position turntable alignment
soft start
Film carriage
powered pre-stretch system up to 200% to min film consumption
carriage door opens for effortless roll change and thread film
film delivery variable speed by separate dc drive motor
electronic film tension control adjustment on panel
film dancer-bar with variable speed output
Film carriage drive
heavy duty double-chain carriage lift, calm and safety
film carriage variable speed by frequency changer
Option
ramp
top plate
auto film attach and cut off system
packing height:1800, 2400mm
turntable diameter: 1800mm, 2000mm
Standard features
Stainless steel construction
Servo motor controlled film pull belts
Servo motor controlled jaw seal actuation
Mitsubishi touch screen operator interface
Mitsubishi plc - based control system
Automatic program set-up
Instant program changeover
Mark sensor (fiber optic) registration control
Quick change former assembly
Product clamp and settler
Full safety guarding and interlocks (option)
Ce approved electrical
Accessories and options
Polyethylene seal systems
Material stopper
Load shelf for heave bag support
Tear notches
Nitrogen gas flush systems
Hole punch (round or euro)
Vacuum assist units
Static eliminators
Gusseted device
Special power requirement
Transformers for non-standard voltage
Special end-seal configurations
Model bx-400 bx-600 bx-700
Bag width: 50-160mm on pillow bag 75-240mm on pillow bag 90-285mm on pillow bag
Bag length: up to 200mm on a single pull up to 300mm on a single pull up to 330mm on a single pull
Speed: max. 100bpm(single pulling)
Max. 50bpm(double pulling) max. 100bpm(single pulling)
Max. 40bpm (single pulling) max. 100bpm(single pulling)
Max. 40bpm(double pulling)
Actual speeds are dependant upon product characteristics, bag size, packaging material, filling system etc.
Electrical 220 vac +5%/-10%, 1° with ground (pe), 50 hz 3.5kw service required
Air consumption 0.2m3/min @ 6 bar for 100 bpm
Temperature nominal ambient 10-35¦c (50-95¦f)
Humidity less than 90% non-condensing
850kg 1700*1500*1900mm
6711 Packaging Machinery Suppliers
Short on time? Let Packaging Machinery sellers contact you.
