Bed Side Screen (four Fold) Overall approximate size: 1675 mm (H) x 2440 mm (W). Strong and precise steel tubular frame work with four folds, each 610 mm wide. The two outer folds fitted with two castors each and two inner folds with one castor / two castors each, all of 50 mm dia. Supplied with spring cords and curtains. Pre treated and Epoxy powder coated.
Saline Stand All stainless steel tubular construction with five pronged base mounted on 50 mm dia swiveling castors. Stainless steel rod with four hooks. Adjustable height. Mirror polished finish.
The following is the operation of the product 1, insert the used syinge needle to the destorye mouth. 2.Move the handle down to close the destroyer mouth and cut off the needle 3, move the handle up to open the destroyer mouth, now the needle has been destroyed, 4, move the handle to facilitate needle falling into the container The following is more detail information of our products: 10 units/ctn, 48cm*45cm*19cm, G/w:10kg/ctn
The following is advantage of the syringe needle destroyer 1.It is used for processing after using needle . so the product is helpful to protect the environment and useful for hospital,medical organization and government. 2.The product is manual operation ,not electrical,so it not only can save the electric power but also more safety. 3.The cutting edge can be replaced, and it can cutting more than 50,000 times of needles according to the Quality Inspection Center Test Report (ICTR). 4.The materials of products is stainless steel. Which is not rust and looking very beautiful. The following is the operation of the product 1, Insert the used syringe needle to the destroyer mouth. 2.Move the handle down to close the destroyer mouth and cut off the needle 3, Move the handle up to open the destroyer mouth, now the needle has been destroyed, 4,Move the handle to facilitate needle falling into the container The following is more detail information of our products: (CE Cettificated)Min Order QuantitY:3000Units N/W: 0.814KG/UNIT Volume of the container: 350ml Size of the cutter:16.5*8.5*14cm Quantity of the needle hub:900-1000pcs according to the size of the needle hub Samples delivery Time: anytime Products delivery Time: according the quantity you ordered. Payment Terms: T/T Package: 46.5*45*17cm 10box/ctn, G/W:10.8KG/CTN
Model No. : RSU-131 Product Name : Portable Suction Unit Specification : Type Portable Voltage AC 110/220V Current 1.0/0.5A Max. HP 25W Vacuum pressure 680~700 mm/Hg Max. flow rate 30 liter/min Max. volume 1,000c.c. Foot switch No Noise 50 dB Using pump oil-less N.W. 4.3 KGS G.W. 5.5 KGS Packing (LxWxH) 43X22X32cm Standard Accessories : Suction tube 180cm 1pc Suction catheter 1pc Filter (small) 2pcs Fuse 2pcs
Model No. : RAU-123 Product Name : Portable Autoclave Specification : Type Portable Voltage AC 110/220V Power supply 1KW Designed temperature 140C Sterilizing temperature 121/128C Sterilizing pressure 1.2/1.6 kg/cm Chamber size 23X41cm Chamber capacity 17 Liters Auto dry No Auto add water No Safety device Yes N.W. 18 KGS G.W. 25 KGS Packing (LxWxH) 60X34X42cm Standard Accessories : Sterilizing box 1pc Sterilizing tray 1pc Heating element 1pc Silicone door seal 1pc
Syringe pump with bodyweight
Copper stylette Used for adult. Rounded-end, soft malleable, hollow, pass oxygen through this stylette. SS stylette with adjustable lock. Used for infant.
Fiber optic laryngoscope Features: lightweight quality 304 stainless steel blade with satin, non-glare finish.Cool light source.No electrical contacts in blade for increased reliability. Sizes: American machintosh-1, 2, 3, 4. English machintosh-1, 2, 3, 4. Miller-0, 00, 1, 2, 3.
Conventional laryngoscope Features: Fit with any standard conventional laryngoscope handle. Crafted with the finest , lightweight, medical grade SS 304 stainless steel with a satin matte finish.Replaceable screw-in lamp(Clear / Frosted / Led). Sizes: Machintosh: 0, 1, 2, 3, 4. Miller-00, 0, 1, 2, 3, 4. Flexitip: 2,3,4 Type: English and American are available.
It is made by injection moulding of ps plastic, non-toxic, non-irritant. It can adjust at will, smooth edges from plastic resin-less, apprehension from patients. For single use only, sterile unless package is opened or damaged, sterilized by ethylene oxide. Size: L, M, S. Carton size: 52*39*32 cm G.W.: 6kg Single polybag, film, blister.
Br5000a type portable endoscopic imager is applied to the routine inspection of ear, nose, throat and other parts of human body or post-operative examination and evaluation; with the portable, integrative , small-size, and lightweight design, it is convenient for users to operate the imager by one hand; with the unique light source supply system and high-quality rod lens, the high-resolution imaging system is able to display high-definition image for doctors to observe the external auditory canal, tympanic membrane, blood vessels of ear, nasal cavity, throat and other parts of human body easily and clearly, which helps doctors to develop the appropriate medical treatment programs; this system can be widely applied in hospitals, clinics, medical centers, beauty institutes and household use. Size: 42x33x15 cm3 Weight: 6kg
Iber optic anesthesia laryngoscope We offer the best quality and best quality anesthesia laryngoscopes in many models. We use the best materials to produce our anesthesia fiber optic laryngoscopes. Product description The laryngoscope blades are available in a full range of sizes, from infant to large adult, and in all popular styles including miller, macintosh. Features Solid, sturdy chrome blades. Optic fibre illumination system is applied in the blade. The blade is made of stainless steel and can be sterilized at 134íµ. Halogen bulb is fixed in engagement of the blade. High impact plastic case - for ease of transport Complete sets of most popular laryngoscope blades Most economical Mac 2\mac3\mac4 Mill0\mill1
With high intelligent, it can judge in time and solve automatically when it meet some small problems. It can make sure prevent tissue form being injured, can automatically track feedback, remove some error in accumulating, position orderly, operate reliably. The users can set two program and choose any one according to different tissue. If the power is switched off suddenly, the machine can go on work and correct mistake automatically when the power switch on again. The lcd is make the communication between user and machine easily. The sterilization system can clean , sterilize and exhaust the harmful air which exist from the evaporation of reagent . Technical data: 1)total containers: 12 (9 for reagent + 3 for medical paraffin) 2)station capacity:2000ml (1000ml for 12p) 3)processoring time: 0~99 hrs 4)temperature range: 0~99f¦ 5)delay boot -strap time set arbitrarily in 1~96 hrs (4 days) 6)hydraulic stop time: 20~120 seconds 7)remaining infiltration time; 20 seconds 8)tissue protective hydraulic: container 5 9)normal voltage and frequency: ac200fa 10% 50hz fa 1hz 500wfa 10% 10)temperature of environment: 0~40f¦
Ultrasonic cleaner is a kind of science technology, which is by ultrasonic cavitations, by the principle of ultrasonic transducer librated and emitted, it can clean thoroughly dirty, deposit on the article, the result of cleaning is obvious and inturtionist.It is a complete ultrasonic cleaner that collects washing, cleaning and sterilizing. Cxq-30a ultrasonic cleaner Available for: Home:jewelleryíówaterproof-watchíóbadgeíóstickpiníóglassesíódiscíófake toothíótoothbrush Machine:parts for caríómotorcycleíógolf appliance Lab:test tool commodity pant lab equipment and fittings Supplier of electronic horologe artware Features: Transparent cover clear and reduces the noise effectively Time can be adjusted Stainless steel tank capacity is 600ml Ultrasonic power:30w, ultrasonic frequency:40khz Dimension(l*w*h):210*165*140mm
Low-vacuum (amniotic fluid) suction apparatus Model DYX-1A 1. Max vacuum: 18+1.5kpa(135+11mmhg) 2. Vacuum range: 2kpa(15mmhg)-max vacuum 3. Flow rate: l/min 4. Noise:ü55db(a) 5. Jar capacity: 1000ml(pc) 6. Power supply: ac220và10%, 50hz 7. Power input: 30va 8. Gw: 3.5kg; nw: 2.5kg 9. Dimension: 63.8cm17.6cm32.5cm(one set) 40cm 37cm34cm (two sets).
* Modern and very quite, high performance motors as well as special spindles are used to realize precise and steady movement. * A new design motor arm with an electrical height adjustment, for loads up to 90KG. * The stoppers are infinitely variable from 00-3300 * Speed: 40mm/s * Vertical travel: 690mm * Optional air brake system can be adapted to various safety requirements and construction facilities. * Movement angle: 00-3200 horizontal, up +210 down -240. CARTONS
New external counterpulsation device(product model: p-ecp/t) is based on modern medicine, biomedical engineering, gas dynamics, computer technology, embedded technology, modern control technology and modern industrial design. Higher precision control, greater security of the treatment and better therapeutic effect of external counterpulsation are reached. The new device is not only stable and comfortable, but equipped with the characteristics of refined appearance, small size and low noise. Currently, we have already developed five types ecp products. Type p-ecp/t is split-type product which divide the machine to two parts, the bump and the bed. Type p-ecp/ti integration product which integrates the bump in the machine body. Type p-ecp/tm product is mobile external counterpulsation device which has smaller size and can be moved conveniently. Type p-ecp/tc is professional machine for children. All the types above can give external counterpulsation on legs and buttocks, and we can support these types with upper limb cuffs. Type p-ecp/tf product is external counterpulsation for familyí»s health care. External counter pulsation, external counterpulsation, ecp, ecp machine, ecp therapy, ecp devices
New external counterpulsation device(product model: p-ecp/t) is based on modern medicine, biomedical engineering, gas dynamics, computer technology, embedded technology, modern control technology and modern industrial design. Higher precision control, greater security of the treatment and better therapeutic effect of external counterpulsation are reached. The new device is not only stable and comfortable, but equipped with the characteristics of refined appearance, small size and low noise. Currently, we have already developed five types ecp products. Type p-ecp/t is split-type product which divide the machine to two parts, the bump and the bed. Type p-ecp/ti integration product which integrates the bump in the machine body. Type p-ecp/tm product is mobile external counterpulsation device which has smaller size and can be moved conveniently. Type p-ecp/tc is professional machine for children. All the types above can give external counterpulsation on legs and buttocks, and we can support these types with upper limb cuffs. Type p-ecp/tf product is external counterpulsation for family's health care.
New external counterpulsation device(product model: p-ecp/t) is based on modern medicine, biomedical engineering, gas dynamics, computer technology, embedded technology, modern control technology and modern industrial design. Higher precision control, greater security of the treatment and better therapeutic effect of external counterpulsation are reached. The new device is not only stable and comfortable, but equipped with the characteristics of refined appearance, small size and low noise. Currently, we have already developed five types ecp products. Type p-ecp/t is split-type product which divide the machine to two parts, the bump and the bed. Type p-ecp/ti integration product which integrates the bump in the machine body. Type p-ecp/tm product is mobile external counterpulsation device which has smaller size and can be moved conveniently. Type p-ecp/tc is professional machine for children. All the types above can give external counterpulsation on legs and buttocks, and we can support these types with upper limb cuffs. Type p-ecp/tf product is external counterpulsation for familyí»s health care.
