Silicon Carbide Bulletproof Plate : 1. Excellent Thermal Shock Resistance 2. Excellent Oxidation Resistance 3. Very Low Friction Coefficient 4 High Hardness, Out Standing Wear Resistance 5. High Strength Over A Wide Temperature Range 6. Low Thermal Expansion and High Thermal Conductivity.
Conductive Ceramic Evaporation Boat Ceramic evaporation boat is the very good material for vacuum aluminizing strict requirements which has special electrical and thermal properties. It is made of electrically conductive advanced ceramic composites ( Boron Nitrideï¼?Titanium Diboride and Aluminium nitride), and can meet the strict requirement for metal film and paper with good thermal shock resistance and good chemical inertness of liquid aluminum. BN evaporator boat� has the advantages of long service life, uniform evaporation, fast heating speed and high evaporation efficiency. Boron nitride ceramic evaporation boats is widely used in vacuum aluminium plating packing factory, capacitors metallized coating, screen coating, bronzing coating, anti fake mark coating, reflective coating and paper. Features: Good chemical stability Excellent thermal shock resistance ability and bending resistance The molten aluminium spreads easily and evenly. A good resistance to molten aluminium or any other molten metal corrosion increases the boatâ??s life. Technology standard: Working currentï¼?400-900A Working voltageï¼?5-15V Operating temperatureï¼?1300-1750â?? Evaporation rate� ï¼?0.3-0.5ï¼?g/min/ cm�²ï¼? Service lifeï¼?15-20/h Densityï¼?2.8-3.2g/cm�³ Resistivityï¼?200-300�¼�©/ cm Coefficient of thermal expansionï¼?(4-6)*10-6K Bending strengthï¼?>150Mpa.
It is a ceramic rubber composite board, which can be fixed in the truck bucket because the hardness of the ceramic is higher than the metal, the rubber can play an excellent role in buffering.� It can� increase the life� of your transportation equipment by� 10 times. Ceramic mesterial 92% alumina Ceramic size �?20*8 mm cylinder ceramic liner Rubber wear liner size 500*500*20 mm Rubber wear liner size weight About 17.2 kg/piece Sample time 1-5 days 92 Alumina Ceramic Liners Al2O3:â?¥92% Density:â?¥3.6g/cm�³ Porosity:ï¼?0.25 compressive strength:â?¥1050Mpa Rockwell Harndess â?¥85.5HRA Vickers Hardness Hv20: â?¥1050Mpa Fracture Toughness(KIC): â?¥3.7MPa.m1/2 Bending strength: â?¥220Mpa Wear Volume:â?¤0.25cm3 Appearance: white Product description: Also named wear cermaic parts, wear rubber ceramic plate, wear resistant ceramic pads. Ceramic rubber composite pads&plate is use of rubber vulcanization process, to embed the wear-resistant ceramic vulcanized into rubber, stick it on the inner all of equipment with the adhesice paste.As customers' requirment, it also can be vulcanized together with steel plate, with bolts or not. Features: It combines wear-resistance of ceramic of ceramic and impact-resistance of rubber, apply to conveying systems equipment work under normal temperture,and can bear some impact. Impact-resistant and wear-resistant ceramic rubber composite lining board (three-in-one lining board) is mainly used in the thermal power industry (falling coal pipe lining board), the steel industry (blast furnace hopper, cylindrical mixer), the cement building materials industry (clinker clinker) Chute), smelting industry (hopper), machinery industry (hopper), coal industry (transportation station chute), mining industry (initial break, medium and fine breakage, transfer chute hopper), chemical industry (chute), organic silicon industry (level two) Heavy-duty cyclone dust collector), coal chemical industry (falling coal pipe), port terminal (ship unloader hopper), commercial industry (mixer liner), automobile manufacturing and other heavy-wearing industries.
Good Wear Resistance 1 Super wear-resistant alloy's hardness HRC 56, have good wear resistance and thermal stability. 2 Good shock resistance, metal bonding properties, thermal shock resistance 3 Good heat resistance and corrosion resistance 4 The composite of low cost and good quality 5 Transportation, installation and easy to use
Rubber wear liner size 500*500*32 mm Rubber Ceramic Wear Resistant Liner Supplier Ceramic mesterial 92% alumina With or without bolts Without Ceramic size Cylinder �?20*20 mm Rubber thickness 8 mm Steel plate thickness 6 mm Seam tolerance 3�±1mm Rubber wear liner size weight 29.6 kg/piece Sample time 1-5 days Product description: Also named wear cermaic parts, wear rubber ceramic plate, wear resistant ceramic pads. Ceramic rubber composite pads&plate is use of rubber vulcanization process, to embed the wear-resistant ceramic vulcanized into rubber, stick it on the inner all of equipment with the adhesice paste.As customers' requirment, it also can be vulcanized together with steel plate, with bolts or not. Features: It combines wear-resistance of ceramic of ceramic and impact-resistance of rubber, apply to conveying systems equipment work under normal temperture,and can bear some impact. Applications: Raw material feeding system: belt head hopper, belt head hopper, trolley tee bucket, and feed hopper. Batching system: mixing silo, primary mixing cylinder, secondary mixing cylinder, mixing disc, pelletizing disc. Sintering material conveying system: beneficiation hopper under the vibrating screen, long-distance beneficiation hopper, silo. Dust removal and ash discharge system: dust removal pipe, elbow, tee, dust falling pipe, and tail dust removal pipe. Coking system: coke hopper. Iron-spraying coal injection system, medium speed mill: cone bucket, separation baffle, outlet pipe, pulverized coal pipe, and burner cone. Steel ball mill: outlet pipe, coarse powder separator, fine powder separator, coal powder pipe, elbow, inner shell of powder discharge machine. Steel rolling workshop: slag flushing pipeline. Impact-resistant and wear-resistant ceramic rubber composite lining board (three-in-one lining board) is mainly used in the thermal power industry (falling coal pipe lining board), the steel industry (blast furnace hopper, cylindrical mixer), the cement building materials industry (clinker clinker) Chute), smelting industry (hopper), machinery industry (hopper), coal industry (transportation station chute), mining industry (initial break, medium and fine breakage, transfer chute hopper), chemical industry (chute), organic silicon industry (level two) Heavy-duty cyclone dust collector), coal chemical industry (falling coal pipe), port terminal (ship unloader hopper), commercial industry (mixer liner), automobile manufacturing and other heavy-wearing industries. If you want to get a quick quote, please send us these details: 1.Sample quantity, bulk order quantity 2. Application industry 3.Target price 4. Sample shipping address 5. If you need customization, please send us the specific composition, size and drawing
Rubber wear liner size 500*500*32 mm Ceramic mesterial 92% alumina With or without bolts Without Ceramic size Cylinder �?20*20 mm Rubber thickness 8 mm Steel plate thickness 6 mm Seam tolerance 3�±1mm Rubber wear liner size weight 29.6 kg/piece Sample time 1-5 days Product description: Also named wear cermaic parts, wear rubber ceramic plate, wear resistant ceramic pads. Ceramic rubber composite pads&plate is use of rubber vulcanization process, to embed the wear-resistant ceramic vulcanized into rubber, stick it on the inner all of equipment with the adhesice paste.As customers' requirment, it also can be vulcanized together with steel plate, with bolts or not. Features: It combines wear-resistance of ceramic of ceramic and impact-resistance of rubber, apply to conveying systems equipment work under normal temperture,and can bear some impact. Applications: Raw material feeding system: belt head hopper, belt head hopper, trolley tee bucket, and feed hopper. Batching system: mixing silo, primary mixing cylinder, secondary mixing cylinder, mixing disc, pelletizing disc. Sintering material conveying system: beneficiation hopper under the vibrating screen, long-distance beneficiation hopper, silo. Dust removal and ash discharge system: dust removal pipe, elbow, tee, dust falling pipe, and tail dust removal pipe. Coking system: coke hopper. Iron-spraying coal injection system, medium speed mill: cone bucket, separation baffle, outlet pipe, pulverized coal pipe, and burner cone. Steel ball mill: outlet pipe, coarse powder separator, fine powder separator, coal powder pipe, elbow, inner shell of powder discharge machine. Steel rolling workshop: slag flushing pipeline. Impact-resistant and wear-resistant ceramic rubber composite lining board (three-in-one lining board) is mainly used in the thermal power industry (falling coal pipe lining board), the steel industry (blast furnace hopper, cylindrical mixer), the cement building materials industry (clinker clinker) Chute), smelting industry (hopper), machinery industry (hopper), coal industry (transportation station chute), mining industry (initial break, medium and fine breakage, transfer chute hopper), chemical industry (chute), organic silicon industry (level two) Heavy-duty cyclone dust collector), coal chemical industry (falling coal pipe), port terminal (ship unloader hopper), commercial industry (mixer liner), automobile manufacturing and other heavy-wearing industries.
Product description: Also named wear cermaic parts, wear rubber ceramic plate, wear resistant ceramic pads. Ceramic rubber composite pads&plate is use of rubber vulcanization process, to embed the wear-resistant ceramic vulcanized into rubber, stick it on the inner all of equipment with the adhesice paste.As customers' requirment, it also can be vulcanized together with steel plate, with bolts or not. Features: It combines wear-resistance of ceramic of ceramic and impact-resistance of rubber, apply to conveying systems equipment work under normal temperture,and can bear some impact. Impact-resistant and wear-resistant ceramic rubber composite lining board (three-in-one lining board) is mainly used in the thermal power industry (falling coal pipe lining board), the steel industry (blast furnace hopper, cylindrical mixer), the cement building materials industry (clinker clinker) Chute), smelting industry (hopper), machinery industry (hopper), coal industry (transportation station chute), mining industry (initial break, medium and fine breakage, transfer chute hopper), chemical industry (chute), organic silicon industry (level two) Heavy-duty cyclone dust collector), coal chemical industry (falling coal pipe), port terminal (ship unloader hopper), commercial industry (mixer liner), automobile manufacturing and other heavy-wearing industries. Rubber wear liner size 500*500*10mm Ceramic mesterial 92% alumina Bolts Without Ceramic size 20*20*6mm Rubber thickness 4mm Seam tolerance 3�±1mm Rubber wear liner size weight 6.8kg/piece Sample time 1-5 days Other size for your reference: 300*300*8mm 515*515*8mm 500*500*10mm 400*200*14mm 302*302*15mm 300*300*10mm 500*500*15mm 291*288*18.5mm 500*500*20mm 500*500*29mm 500*500*50mm 300*300*63mm 500*250*95mm 500*500*28mm 500*400*30mm 500*100*30mm 500*500*50mm 500*500*20mm 390*190*25mm 300*300*33mm 415*240*32mm 292*444*32mm 500*500*32mm 390*190*63mm 390*390*63mm
Rubber wear liner size 500*500*10mm Ceramic mesterial 92% alumina Bolts Without Ceramic size 20*20*6mm Rubber thickness 4mm Seam tolerance 3�±1mm Rubber wear liner size weight 6.8kg/piece Sample time 1-5 days Product description: Also named wear cermaic parts, wear rubber ceramic plate, wear resistant ceramic pads. Ceramic rubber composite pads&plate is use of rubber vulcanization process, to embed the wear-resistant ceramic vulcanized into rubber, stick it on the inner all of equipment with the adhesice paste.As customers' requirment, it also can be vulcanized together with steel plate, with bolts or not. Features: It combines wear-resistance of ceramic of ceramic and impact-resistance of rubber, apply to conveying systems equipment work under normal temperture,and can bear some impact. Impact-resistant and wear-resistant ceramic rubber composite lining board (three-in-one lining board) is mainly used in the thermal power industry (falling coal pipe lining board), the steel industry (blast furnace hopper, cylindrical mixer), the cement building materials industry (clinker clinker) Chute), smelting industry (hopper), machinery industry (hopper), coal industry (transportation station chute), mining industry (initial break, medium and fine breakage, transfer chute hopper), chemical industry (chute), organic silicon industry (level two) Heavy-duty cyclone dust collector), coal chemical industry (falling coal pipe), port terminal (ship unloader hopper), commercial industry (mixer liner), automobile manufacturing and other heavy-wearing industries.
Size: 300*300*8mm,515*515*8mm,300*300*10mm,500*500*63mm,390*190*25mm, 495*435*30mm 146*300*32mm, 240*240*32mm etc. Ceramic rubber composite board is divided into two in one and three in one. Among them, two-in-one refers to ceramic and rubber, which is a two-layer structure. It is mainly used for parts that are easy to install and parts with a circular arc shape, such as a circular cone funnel, a driving roller of a belt conveyor, and the like. The connection method of the two-in-one ceramic rubber composite board uses a special rubber adhesive, and the composite board is bonded to the steel plate of the device with a high-strength adhesive to form a strong, cushioning wear-resistant layer. Three-in-one refers to the ceramic-rubber-steel composite plate, which is a three-layer structure. The three-in-one composite plate comes with bolts for easy installation. It is mainly used for the protection of the blanking point of the square chute, blanking tube, and bulk materials. Terminal transportation equipment, mine transfer equipment, etc.
Size: 300*300*8mm,515*515*8mm,300*300*10mm,500*500*63mm,390*190*25mm, 495*435*30mm 146*300*32mm, 240*240*32mm etc. The wear-resistant ceramic plate is special corundum ceramic with AL2O3 as the main raw material, rare metal oxide as the flux, and a high-temperature roasting of 1,700 Baidu. Therefore, the wear-resistant ceramic plate has the characteristics of high-temperature resistance, acid and alkali corrosion resistance, and good wear resistance. It is widely used for anti-wear of mechanical equipment and is also widely used for anti-wear of steel pipes, power plants, chemical industry, cement building materials industry and other systems. The following is a detailed introduction to the application of wear-resistant ceramic plates in steel mills: Raw material feeding system: belt head hopper, belt head hopper, trolley tee bucket, and feed hopper. Batching system: mixing silo, primary mixing cylinder, secondary mixing cylinder, mixing disc, pelletizing disc. Sintering material conveying system: beneficiation hopper under the vibrating screen, long-distance beneficiation hopper, silo. Dust removal and ash discharge system: dust removal pipe, elbow, tee, dust falling pipe, and tail dust removal pipe. Coking system: coke hopper. Iron-spraying coal injection system, medium speed mill: cone bucket, separation baffle, outlet pipe, pulverized coal pipe, and burner cone. Steel ball mill: outlet pipe, coarse powder separator, fine powder separator, coal powder pipe, elbow, inner shell of powder discharge machine. Steel rolling workshop: slag flushing pipeline.
Vulcanized rubber parameters- No Item Unit Test result 1 Hardness Shore A 57 2 Adhesion of ceramic rubber kN/m 3.8 3 Steering strength MPa 10.6 4 Elongation at break % 468 5 Permanent Deformation % 17.8 - Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc. - Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc. - Hexagonal tile: S12.5xT3~20mm, S23.5xT6-25mm - Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples) - Ceramic Block: 40x40x40mm, 45x45x50mm,32x32x22mm, 38x38x38mm,etc. - Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.
Vulcanized rubber parameters 1 Hardness Shore A 57 2 Adhesion of ceramic rubber kN/m 3.8 3 Stearing strength MPa 10.6 4 Elongation at break % 468 5 Permanent Deformation % 17.8 FAQ Q: Are you a trading company or manufacturer? A: We are a?factory. Q: Is the sample free? A: Yes, we offer free samples. ? ? The sample air shipping fee will be returned when the bulk order. Q: How long is your delivery time? A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity. Q: What are your terms of payment? A: 30% T/T in advance, balance before shipment. Q: Accept customized? A: Yes. Kindly send all your details to our worker
Activated Alumina Ball For Air Dry , H2o2 Production,desiccant 100% Original Material, No Recycle
CERAMIC CUPS FROM FAMOUS CERAMIC ARTIST IN CHINA-MASTER CHENG GUI HUA. BIG PROMOTION IN NEW YEAR ORDER: BUYING 2 FREE 1 FOR EVERY KIND OF CUTE GIFTED CUPS WITH ANY TYPE CUSTOMER DESIGNS.
CERAMIC CUPS FROM FAMOUS CERAMIC ARTIST-MASTER CHENG GUI HUA IN CHINA. BIG PROMOTION IN NEW YEAR ORDER: BUYING 2 FREE 1 FOR EVERY KIND OF CUTE GIFTED CUPS WITH ANY TYPE CUSTOMER DESIGNS.
CERAMIC CUPS FROM FAMOUS CERAMIC ARTIST-MASTER CHENG GUI HUA IN CHINA. BIG PROMOTION IN NEW YEAR ORDER: BUYING 2 FREE 1 FOR EVERY KIND OF CUTE GIFTED CUPS WITH ANY TYPE CUSTOMER DESIGNS.
CERAMIC CUPS FROM FAMOUS CERAMIC ARTIST-MASTER CHENG GUI HUA IN CHINA. BIG PROMOTION IN NEW YEAR ORDER: BUYING 2 FREE 1 FOR EVERY KIND OF CUTE GIFTED CUPS WITH ANY TYPE CUSTOMER DESIGNS. Any Further Information And Order
100*45*25 100*40*38 100*70*13 100*75*25 100*25*25 100*80*25 100*84*25 100*95*25 100*50*6 100*50*8 100*50*10 100*50*12 100*50*13 100*50*15 Densityâ?¥4.0� g/cm3 Al2O3â?¤22% SiO2â 30% Compression strength 6900N Vickers hardnes 10 Gpa Wear Volume 1.2g/kg.h
Category CH90 CH92 CH95 Density 3.50 3.60 3.65 Al2O3 90% 92% 95% ZrO2+Y2O3 / / BendingStrengthMPa 180 220 250 CompressionstrengthMPa 970 1050 1300 FractureToughnessMPam1/2 3.5 3.7 3.8 HVHardnessN/mm2(MPa) 900 950 1000 WearVolume 0.28 0.25 0.20 Different kinds of products: Ceramic Mosaic Pieces, Ceramic Pipe Tiles, Ceramic Curved Tiled(with or without holes), Ceramic Tapered Tiles, Ceramic Cylinders, Stell Lined with Ceramic Tiles, Irregular Shaped Tile, Clipping Ceramic Tiles Interlocking Bricks. We have so many kinds of sizes. And we are also accept customized. Mineral Processing equipment operates in some of the harshest and remote locations. It is crucial to the Mineral Processing industries that this equipment continues to operate efficiently and its lifecycle is maximized to minimize downtime. By appropriately protecting equipment from the extreme wear caused by the high speed and flow rates of ore when processed as a slurry ensures better equipment longevity. The slurry is highly abrasive and can not only cause wear damage to wet processing equipment but also with the inclusion of chemicals and heat, there is a constant risk of corrosion and dangerous leakage. Wear Protection ceramic Linings are used throughout Mineral Processing to protect the steel surfaces of equipment from wear and corrosion. They are used on a range of equipment including pipes, tanks, chutes, pumps, flotation cells, thickeners, launders, and feed spouts or chutes 92% 95% Abrasive Alumina Ceramic Wear Liner
Nano Ceramic Universal Restorative Magma NT Nano Ceramic restorative is visible light curing composite designed for use in anterior and posterior restorations. Magma NT is a low shrinkage composite with filters in combination of nano silica and zirconia filter Indications Direct anterior and posterior restorations Core build-ups Splinting Indirect restorations Product Benefits Easy handling due to high viscosity Very high wear resistance High polishability
