Attapulgite suspension agent is a thixotropic anti-sinking thickener, which is made of natural rare minerals processed by high-tech special technology, and its main composition is crystalline magnesium aluminum silicate hydrate. It has good anti-sinking and thickening effect in both water-based and solvent-based systems. Specification Powder Colour Grayish white Viscous ,CPS 2000, no precipitation. Mesh Number 200 Moisture,% �¢?�¤12 PH 8-10 Proportion 2.35 Packing Density, g/cm3 : �¢?�¤0.50 Application areas: High-grade putty, paint, ink, liquid fertilizer, pesticide, lubricating oil, fine chemical, printing and dyeing paste, etc. 1. Good thickening. The paint film is plump and the can opening effect is good. 2. Good suspensibility. Prevent paints and paints from precipitation and delamination 3. Good shakiness. It is easy to brush, thinning under the action of shear force and thickening after rest. 4. Good thixotropy. Direct addition, good compatibility, no need to change the process and formula 5. Good leveling. Anti-shrinkage hole and fisheye, not easy to hang 6. Good weather resistance. It has strong acid and alkali resistance, corrosion resistance and mildew resistance. 7. Good thermal insulation. High temperature resistance, thermal insulation, insulation 8. Good environmental protection. Chemical inertia, no pollution, inhibit the growth of microorganisms, absorb toxic volatile components, green environmental protection. As the suspension agent and carrier of pesticides, attapulgite is widely used in pesticides, fungicides, herbicides and so on because of its high oil absorption rate and moderate pH. It can prolong the efficacy, prolong the shelf life and reduce the production cost of pesticides.
Rhodium and iridium we need a buyer for this product the FBO Dar es Salaam
The P2O5 powder we offer has a minimum purity of 36% and can be conveniently packaged or transported in bulk. Our mining site, located in Luanda,Angola monthly production capacity of 25,000 tons.
Hi, i'm selling mill scale, 30000 tones available, text me on whatsapp for more information
Plese study Neutrized Gypsum from KOrea PH 9% MIN. FREE MOISTURE (wt%): 15% MAX. Combined H2O :19% MIN. CaO : 30% MIN. SO3 : 40% MIN. Cl(wt%) :0.01% MAX. CaSO4ã?»2H2O : 90% MIN. TOTAL P2O5(wt%) :1.0% MAX. W/S P2O5(wt%) : 0.05% MAX. SIZE(0~50mm) : 100% INSOLUBLE RESIDUE : 4% MAX.
Magnetite concentrate, in the form of fine powder. Available for sale in the domestic market (Brazil) and also for export (mainly USA and Middle East). Chemical analysis: 62% Fe. Shipment Sao Francisco do Sul/SC, Brazil.
Hematite is a high purity ground Iron Oxide (Ferric Oxide ). Used to increase the density of drilling fluids in Oilfield Drilling Applications . It can also be substituted or blended with barite in all types of mud systems. It is grinded to a Size Suitable for Drilling and removing Impurities. HEMATITE POWDER ADVANTAGE 1) It has a lower attrition rate than barite, being harder has less chances of particle size degradation 2) It improves rheological properties in muds. 3) It provides a higher rate of penetration. 4) It is more resistant to particle size degradation and is more environmental friendly than barite 5) Due to its higher Specific Gravity the Muds have lower Solid Content as compared to Baryte Muds 6) Elevate your drilling endeavors with our specialized chemicals engineered for specific challenges. Our portfolio includes a diverse range of solutions, from wellbore stability to reservoir Hematite optimization. Explore our collection of specialty drilling chemicals today.
We have beryllium and other minerals ore here in Nigeria. We have sites where you can even come yourself to mine it. The price is per tonne for beryllium which other ores prices are different.
Lost Circulation Material popularly known as LCM in Oil & Gas drilling industry. It is of many types like Cellulose fibre, Mica / Muscovite / Nut plug / Quick seal / etc. We manufacture all type of LCM Material.
Main Properties Dark brown powder pH of 1% soln.: 9.5 Water solubility: >80 % Application Maintains Rheology Controls Filtration loss Maintains pH. Packing 25kg HDPE bags 25kg Paper bags Customised packing
Synonyms: Amorphous silica, Diatomaceous earth, Siliceous clay, Silicone dioxide & Kieselguhr. SiO2 content >85%, Al2O3 < 5%, Fe2O3 < 2%. Reactive Silica> 95%. Size 100 to 350 mesh. 20' container: 12-14 MT
LCM/Lost Circulation Material/Lost Circulation Additive: Cellu-Seal/Max-Seal/Pills is a versatile lost-circulation material engineered to mitigate both significant lost circulation and minor seepage losses.) is specially crafted flaky material out of eco-friendly Cellulosic fibres, used & compatible for all type of fluid system i.e., Water base, Oil Base & Synthetic based. It evenly mixes and does not form lumps. With negligible effects on rheology, it replaces Muscovite & Calcium carbonate flakes. Available in Coarse, Medium & Fine grades help sealing pores and pore throats of permeable formations encountered during drilling of depleted zones. This is equivalent to MIX-II of SLB, Baro-Fibre of Halliburton, CHEK-LOSS of Baker Hughes and so on. Other products include Qwik-Seal equivalent of SLB's MI-SEAL, Nut Plug, Super-Sweep & Mica Flakes
Acts as a thinner and dispersant in drilling mud systems. Enhances fluid loss control for efficient drilling. Stabilizes rheological properties to maintain drilling fluid consistency. Extends temperature limits for high-temperature drilling. Assists in oil emulsification to stabilize drilling fluids. Reduces flocculation to prevent particle aggregation. Stabilizes water-based drilling fluids for overall drilling efficiency.
Release stuck pipes at relatively low cost. Release of drill pipes that are stuck due to differential pressure between wellbore and the formation. It is equivalent to SLBs Pipe-Lax
We are a mini g company from Turkey. We can supply sepiolite 1. Water < 10 2. Viscosity >6000cps 3, sepiolite raw ore, without any additives High purity, no impurities 5, light white, yellow white, meat white colour.
Glass GRADE "Glass grade properties" typically refer to the specific characteristics and qualities of glass that determine its suitability for various applications. Glass comes in a wide range of types and grades, each with its own set of properties that make it suitable for different purposes.High grade silica sand manufacturer for Glass Industries serving both Float glass as well as container glass Industries. We are manufacturing around 3000 to 5000 Tons of Glass Grade Sand per month. Here are some important glass grade properties: Properties: 80 - 100 ppm 130 - 150 ppm 150 - 200 ppm 200 - 250 ppm 250 - 300 ppm 300 - 500 ppm Transparency: Glass is known for its transparency, allowing light to pass through. The level of transparency can vary based on factors such as the type of glass, its thickness, and any coatings or treatments applied to it. Hardness: Glass is a hard material, but its hardness can differ based on the specific type of glass. Some glasses are more scratch-resistant than others.
Ball clay, or plastic clay as it is also known, is an extremely rare mineral, only found at a handful of locations around the world. It is a kaolinitic clay that commonly consists of 20 - 80% kaolinite, 10 - 25% mica, 6 - 65% quartz as well as organic matter. Ball clay is formed from the weathering and transportation by water of parent rocks which are deposited in ancient river basins from where it is extracted. Applications: - Ball clays are prized for the production of traditional ceramics such as sanitaryware, tableware, wall and floor tiles as well as for technical ceramics and electrical porcelains. Ball Clay products are immensely used in the manufacturing of Ceramics, Sanitaryware, Vitrified Tiles, Glazes and Engobes ultramarine and in various other purposes. As per requirement Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. BRIGHTNESS: - 96+ AS PER REQUIREMENT Index Compound Result 1. Silica - (SiO2) 50 - 65 % 2. Alumina - (AI2O3) 20 - 35 % 3. Iron - (Fe2O3) 0.33 - 2 % 4. Titanium - (TiO2) 0.31 - 3 % 5. Potash - (K2O) 0.19 - 2 % 6. L Value 60 - 88 %
China Clay is a naturally hydrated Aluminum Silicate. It is one of the most abundantly available clay in the Earth's crust. Pure grade of China clay or kaolin clay produced by the processes of levigating. China Clay is also called KAOLIN, it is one of the essential Raw materials for Ceramic Industries, China Clay does not swell on adding water & Alumina present in Clay do not form Isomorphism series with any other metallic compound. Applications: - China clay products are immensely used in the manufacturing of ceramics, papers, paint colors, vitrified tiles, soap, ultramarine and in various other purposes Available Mesh Size : As per requirement Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders.
Dolomite mineral is a double carbonate of calcium and magnesium and it exhibits a granular structure. It has high natural whiteness and it's noted for their ease of dispersion. Its use improves properties such as weather ability, reduces shrinkage, fissure development and water absorption. Natural Dolomite Powder is of White Colour and is used as Filler in many applications such as Soap & Detergent, Paints, Ceramics and many other Industries. Applications: - Soap & Detergent Leather Cloth Industry Cable Industries Rigid PVC Pipes Iron, Steel, and Ferro-Alloys Industries Paints, Inks, Powder Coating Ceramic Industry Rubber Industry Glass Industry Available Mesh Size: - 100 TO 700 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. BRIGHTNESS: - 92 TO 96 AS PER REQUIREMENT Index Compound Result 1. Silica - (SiO2) 10.41 % 2. Alumina - (AI2O3) 01.15 % 3. Iron - (Fe2O3) 00.21 % 4. Titanium - (TiO2) 00.18 % 5. Calcium - (Cao) 30.02 % 6. Magnesium - (MgO) 18.41 % 7. Soda - (Na2O) 00.34 % 8. Potash - (K2O) 00.07 % 9. Loss on Ignition - (LOI) 38.91 %
Introduction: - Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for many applications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR Applications: - CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Available Mesh Size: - 100 - 500 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index ompound Unit Result 1. Silica - (SiO2) % 66 - 68 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.03 - 0.06 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 - 3 8. Potash - (K2O) % 10 - 12 9. Loss on Ignition - (LOI) % 0.10 - 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 - 72 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.10 - 0.15 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 0.05 - 0.20 6. Magnesium - (MgO) % 0.10 - 0.15 7.Soda - (Na2O) % 9 - 10 8. Potash - (K2O) % 0.50 - 0.20 9. Loss on Ignition - (LOI) % 0.10 - 0.20
