Handheld OTDR is the newest instrument designed for testing FTTx network According to clients needs.
HR manufactures a wide variety of Prisms. Custom designs including right-angle, equilateral (dispersing), and cube Prisms, dove Prisms, roof Prisms, penta Prisms, and retroreflectors. These Prisms are available in a wide variety of materials, including glass, Germanium, Silicon, ZnSe , ZnS , Fused Silica, Quartz and calcium fluoride. Dimension 2mm to 500mm.
United Photonics Technology, Inc.-ISO9001 Company Mirror Mirror is a reflecting surface that forms an image of an object when light rays coming from that object fall upon it. Usually mirrors are made of plate glass, one side of which is coated with metal or some special preparation to serve as a reflecting surface. UPT offers dielectric coated mirrors and metal coated mirrors which are made of substrate such as Bk7, K9, Fused Silica, CaF2, Sapphire. Specifications: Material: BK7 Grade A Optical Glass or other material, Typical Diameter (�¦mm) 8.0, 10.0, 12.7, 15.0, 20.0, 25.4, 30.0, 50.8 Typical Thickness (mm) 2.0, 3.5, 5.0, 6.5 Diameter Tolerance (mm) +/-0.2 (General), +0.0/-0.02 (High Precision) Thickness Tolerance (mm) ±0.2 (General), ±0.05 (High Precision) Clear Aperture >80% (Small Size), >95% (Large Size) Parallelism 6 min. (General), 3 sec. (High Precision) Surface Quality 80/50 (General), 10/5 (High Precision) Flatness (per 25mm@633nm) (General), /10 (High Precision) Bevel (face width x 450)
Penta Prisms / Beamsplitter Penta Prism / Wedge / Right Angle Prisms / Corner Cube Retroreflectors / Anamorphic Prisms / Dove Prisms / Rhomboid Prisms / Reflection Prism / Dispersion Prisms Penta Prisms Penta prism can deviate an incident beam without inverting or reversing to 90.The deviation angle of 90 is independent of any rotation of the prism about an axis parallel to the line of intersection of the two reflecting faces. It is commonly used in Plumb Level, Surveying, Alignment, Range finding and Optical Tooling. The reflecting surfaces of this Prism must be coated with a metallic or dielectric coating. The standard Penta Prism reflecting surfaces are coated with aluminum or enhanced aluminum. Specifications: Material: BK7 Grade A Optical Glass Dimension (mm): 2.5x2.5 ~ 100x100 Dimension Tolerance (mm): +/-0.2 (General), +/-0.05 (High Precision) 90 Deviation Tolerance: 1 arc min.(General),3 arc sec.(High Precision) Angle Tolerance: 3 arc min. (General), 3 arc sec. (High Precision) Surface Quality 80/50 (General), 10/5 (High Precision) Flatness (per 25mm@633nm) (General),/8 (High Precision) Reflection: 90%@400-700nm Note: (1). Besides N-BK7 glass, other optical glass is available for custom-made Penta Prisms. (2). Penta Prism at bigger size is available. (3). Typical deviation tolerance is 1 minute, better precision such as 30 sec, 10 sec, 5 sec or 3 sec is available. (4). Typical reflection is >90% by Al coating, other metal coating such as Ag, Cu, or High Reflection Dielectric Coating is available. (5). Besides uncoating, Anti-Reflective(AR) coating is available upon request. United photonics Technology
Product Description The Auto Splicer functions as a central element for smooth, continuous operation, fast and helps to increase production output and saving production cost during the corrugated cardboard production process. Auto Corrugated Plant Automatic Splicer Function: 1. No paper tail connecting, reduce the loss of the base paper (the overlap of the base paper about 40mm width). 2. When the paper truck remove, automatically transferred out,vacuum-adsorbed, easy to operate, and fully automatictension control, paper-connecting zero error. 3. All adopt PLC automatic control. 4. When the buffer wheel pull for the first time, it's easy to pull and aligned automatically. 5. Collecting paper controlled by cylinder, will not cause the broken tile and blistering problem. Design speed: Model 300-280 m/min(Flute liner)250m/min(Top liner) Model 400-380 m/min(Flute liner)250m/min(Top liner) Paper Connection: overlap connecting Design width: the maximum paper width can reach 2550mm Weight of the original paper: 50g/m2~350g/m2 Paper reaction completion time: about 1 second Gas source: a minimum of 0.6MPa dry clean air source Power demand: power supply:380V, 50Hz, 20A control power:12V,24V Paper frame brake: pneumatic brake/ magnetic powder brake
Hanzhong Brisun Optics Co., Ltd. Is the high High precision optical element manufacturer provides customized production of Various optical lenses, including spherical lens, cylindrical lens, optical window, mirror, prism, filter, metal base mirror and other high-precision optical elements. The base materials include various optical glass, fused quartz, calcium fluoride (CaF2), zinc selenide (ZnSe), germanium (GE), silicon (SI), sapphire, metal and other materials. And provide antireflective film, high reflection film, spectroscopic film, metal film and other optical coatings. Prism is an optical element that turns the light according to the specific angle between the outgoing light and the incident light. In the optical path, the prism can change the angle between the outgoing light and the incident light (such as 90 �°, 180 �°, etc.), offset the light and change the image direction. Prisms are widely used in laser research, laser optical system, optical imaging, machine vision, life science, biomedicine and other fields or products. Borisun optics can provide various prisms in stock standards, such as K9 standard precision right angle prism, K9 high precision right angle prism, UV fused quartz standard precision right angle prism, UV fused quartz high precision right angle prism, K9 pentagonal prism, K9 Dawei prism, K9 ridge prism, K9 angle reflector (K9 pyramid prism), UV fused quartz angle reflector (UV fused quartz pyramid prism), wedge prism, etc. While providing various prism standards, we can also provide you with prism customization services according to your actual needs, such as the change of prism size, the improvement of parameter indicators, the change of coating requirements, etc. Welcome your inquiry and we will serve you wholeheartedly Technical parameters: Material: optical glass, H-K9L (N-BK7), quartz Radius of curvature: ± 1mm - ± 50000mm ± 1% Outer circle: 3mm-500mm ± 0.1mm Center thickness tolerance: ± 0.05mm (we can process to ± 0.01mm with high precision) Center deviation: 3²(we can process to 30 ³with high precision) Surface accuracy:/ 8 (high precision, we can process to 1 / 10�») Surface quality: 60/40 (we can process to 10-5 with high precision) Effective caliber: 90% Coating: according to the customer requirements In addition, we have thousands of kinds of stock, such as quartz plano convex lens, quartz plano concave lens, quartz biconvex lens, quartz biconvex lens, cylindrical lens, prism, filters, windows, beamsplitter and so on. The price is preferential and the quality is excellent, which can meet your demand for a small order. If you are interested it, welcome to inquiry us or search "Hanzhong Borisun Optics Co.,Ltd "to know about more details.
Equal to:jdsu mts-2000 fiber optic otdr Wavelength(nm):1310/1550nm Event blind zone (m):
Fiber Optic Pocket Otoscope, It contains LED Bulb 4mm fiber built in for brilliant light through..
Features: Top-grade quality View Tester in Far East Elegant design butterfly-shape appearance, High grade plated-film used in all optic lenses. This deivce is applicable to ophthalmology department of hospitals and spectacle store for precision measurement of visual functions such as myopia, hyperopia, astigmatism, eyesight balance, heterophoria, stereoscopic vision and eyesight amalgamation Specification: Sphere power range:+16.75D to 19.00D w/minimum reading 0.25D or 0.12D (when using +0.12D auxiliary lens or optional±0.12D lens) Cylinder power range:0 to -6.00D, w/minimum reading 0.25D or 0.12Dï¼?auxiliary lens) 0 to -8.00D(-2.00D auxiliary lens) Astigmatic axis scale: 0 to 180° in 5° steps Cross cylinder:±0.25D, reversal type (synchronized with astigmatic axis) Rotary prism:0 to 20 D in 1 D steps P.D. adjustment:48-80mm; step 1 Forehead rest adjustment:16mm Convergence:the optical axes of the lenses are aligned at a distance of 400mm from enable convergence=57mm to 80mm. Corneal distance:2mm forward and 5mm backward from standard plane with scale? Effective field of view:19mm Product size:291-323mm*315mm*85mm Package size:470mm*440mm*220mm N.W./G.W.: 5kgs / 6.5kgs
Eco pg & uv lens tester
Jht640-75 is based on a higher resolution 640,480, 17,m pitch detector for long range surveillance, optional 320,240, 17,m pitch detector for medium range is also available. The binocular can be effectively used 24h, delivery high quality picture help personnel find the heat signature of people or other threat if hiding under trees and bushes even in total darkness, smoke and fog environment. Features: L integrating function of capture photo, record video and reviewing, which can be output by usb L power control, contrast and brightness adjustment, image polarity conversion and 2,, 4, digital zoom L binocular viewer display, contact with external display device is also available L support up to 32gb sd card L complete, free from dents, blister, cracks, chipped or sharp corners and other visible defects that can effect its serviceability and appearance L small size, light weight and easy operation L compact structure and high reliability.
Nd filters include absorptive and reflective filters, which are used in attenuating lasers and other optical signals. Absorptive filters minimize back reflections, which can be reduced further by adding an antireflection coating to the filter. Reflective filters are available with either a bk7 or uv fused silica substrate. Specification: Materials:bk7 optical glass and fused silica etc Diameter tolerance: +/-0.20 Thickness:0.5-3.0 mm Parallelism 85% Optical density tolerance:+/-5% Coating:specified by customers
SFP RJ45 10/100M Cisco Compatible Copper-T SFP Optical Transceiver Module Specification Data rate: 10/100M Type: Copper Distance: 100M Connector: RJ45 DDM: Yes Place of origin: Made in China Port:Shenzhen Features 1.Hot-pluggable SFP footprint 2.Extended case temperature range (0°C to +70°C ) 3.Fully metallic enclosure for low EMI 4.Compact RJ-45 connector assembly 5.It supports RX_LOS(Loss of Signal) function 6.Compatible with IEEE802.3u 7.Access to physical layer IC via 2-wire serial bus 8.A 10/100BASE-TX/ 100BASE-FX converter Optical module used in Ethernet, SDH, Sonet,Can be compatible with CISCO 2900 Series,CISCO 4000 Series, CISCO 5000 Series,HUAWEI, the pole into, D-Link, ZTE, HP, juniper and other equipment. Our products require strict testing standards,standard packing form,to provide customers with quality service and timely delivery cycle. Scope of application: switch, Ethernet, data center, SDH, SONET, ATM Package type: Individual package or 10pc/package 10G SFP+ optical transceiver ETU Model Cisco Model Allied Telesis Product description ESP8592-3LCD03 SFP-10G-SR AT-SP10SR***â?? 10G SFP+ SR MM 850nm 300M LC connector with DDM ESP3192-3LCD02 SFP-10G-LRM 10G SFP+ LR MM 1310nm 220M LC connector with DDM ESP3192-3LCD10 SFP-10G-LR AT-SP10LR***â?? 10G SFP+ LR SM 1310nm 10KM LC connector with DDM ESP5592-3LCD40 SFP-10G-ER ESP5592-3LCD40â?? 10G SFP+ ER SM 1550nm 40KM LC connector with DDM ESP5592-3LCD80 SFP-10G-ZR AT-SP10ZR80/I***â?? 10G SFP+ ZR SM 1550nm 80KM LC connector with DDM SFP optical transceiver ETU Model Cisco Model Allied Telesis Product description ES8512-3LCD05 GLC-SX-MM AT-SPSX 1.25G SFP MM 850nm 550M LC connector with DDM ES3112-3LCD10 GLC-LH-SMD â?? 1.25G SFP SM 1310nm 10KM LC connector with DDM ES3112-3LCD40 GLC-EX-SMD ES3112-3LCD40â?? 1.25G SFP SM 1310nm 40KM LC connector with DDM ES5512-3LCD80 GLC-ZX-SMD AT-SPZX80â?? 1.25G SFP SM 1550nm 80km LC connector with DDM ES3103-3LCD2 GLC-GE-100FX 155M SFP MM 1310nm 2KM LC connector with DDM ES-T1-RJ45 GLC-T 1000M Copper-T RJ45 100M -
I.High power optical amplifier - features 1. The olah is a fiber amplifier and power supply integrated in a 1ru&2ru shelf. Multiple output ports can be chose. 2. The olah incorporates electrical control circuitry wit a digital signal Processor and includes photodiodes for monitoring the optical Input and output power through tap couplers. 3. Double cooling system can protect the pump laser to work in a long time. 4. Rj45 and rs 232 port, snmp management system. 5. Good stability, vfd displays the working conditions, good trouble alarm system.
Superintelligent eye screener. With superpowerful AI. AI-Optic combines infrared photorefraction with the Deep Learning Algorithm of Artificial Intelligence. Taking eye scans to a whole new level. Maximum precision.200% more accurate.Artificial Intelligence makes AI-Optic the most accurate handheld autorefractor on the planet. Twice as precise when compared to other handheld vision screeners. Capable of measuring up to desktop devices. Minimum price.Pay 90% less AI completely redefines what an eye screener is and how it is manufactured, reducing production costs dramatically.
Custom Bundle No Lens Coating Multi-Coated MPN BAA837SA Item Width 67 mm Modified Item No Item Length 199 mm Item Height 146 mm Size Mid-Size Country/Region of Manufacture Japan Maximum Magnification 20x Weight 1235 g Non-Domestic Product No Model MONARCH 5 20-56 Optical Design Roof/Dach Prism Objective Lens Diameter 20-24 mm Item Weight 1.23 kg Application General Purpose Brand Nikon Color Black Type Binoculars
UPT can provide customized products such as uncoated plano optical, polarizer waveplates, windows, polarizing beam splitters, prisms, scanning galvanometer etc. plano optical component with high specs Like 10-5 L/10 Waveplate, Window, PBS - high power,D200 wedge and 12 inch window. The output methods are flexible and cost-effective.
Uses of Optical Prisms Dispersion: Prisms can be used to separate white light into various colors, a process known as dispersion. When light is refracted through a prism, rainbow colors can be seen, and this is the principle behind the rainbow colors. Reflecting and redirecting light: Prisms can be used to reflect and redirect light, making them useful in optical systems such as telescopes, cameras and binoculars. Measuring Angles: Prisms can be used to measure angles by reflecting a laser beam onto a scale or detector. Beam Control: Prisms can be used to control laser beams in aerospace, medical and industrial applications. Polarization: Prisms can be used to separate light into its polarized state, which is useful in applications such as LCD displays, 3D glasses and polarization measurements. Imaging: Prisms are used to create images such as in periscopes, microscopes and endoscopes. Optical assemblies: Prisms can be used in combination with other optical elements and mechanical parts to create optical assemblies for a variety of applications. Interferometry: Prisms are used to split a laser beam into two or more beams, which can later be recombined to analyze the resulting interference pattern. Overall, the versatility of prisms allows them to be used in a wide range of applications such as scientific research, telecommunications, medicine and military technology. Optical Prism Manufacturer Hongsheng is a leading manufacturer and supplier of optical prisms, offering a wide range of optical products for various industries. Our company specializes in manufacturing a wide range of high precision prisms with specifications including flatness, angle, size, transmitted wavefront, through aperture, surface quality and cusp. Our products include a wide range of prisms such as right angle prisms, penta prisms, aiming prisms, triangular prisms, angular cone prisms, dispersion prisms, rhombic prisms and more. Our team of advanced optics specialists has industry knowledge and expertise in prism manufacturing processes, technologies, manufacturing techniques, manufacturing equipment and metrology to deliver prism optics with superior performance.
orner cube is a high-quality product designed to meet the needs of businesses looking to laser measurement. This product offers a range of features and benefits that make it an ideal choice for businesses of all sizes. Features: Retroreflector prism consists of three mutually perpendicular reflecting surfaces that form an angular cone structure with an internal angle of 90 degrees. When light is incident on any of the reflecting surfaces, it undergoes three reflections and eventually leaves the prism in a direction almost exactly opposite to that of the incident light. This triple reflection ensures that the direction of the reflected light is highly aligned with the direction of the incident light, enabling accurate retroreflection of the light, even if the angle of incidence changes. Benefits: a. UV Material b. High Flatness c. High Volume d. Cheap Price We believe that our corner cube offers an unbeatable combination of quality, performance, and value. If you have any questions about this product or would like to learn more about how it can benefit your business, please don't hesitate to contact us. We are dedicated to providing excellent customer service and helping our customers achieve their business goals. Thank you for considering corner cube. We look forward to the opportunity to work with you and help you achieve success.
Prisms: Right angle prism, Dove prism, Beam splitter, Penta Prism, Corner prism, Trapezium Prism, Rhomoboid Prism, Roof  Prism, Cube prism, customized prisms, etc. Description Of Light Guide Prism. Specifications Of Light Guide Prism Flatness 2/10 Surface Quality 80/50-10/5 Angle Tolerance 3-15 Clear Aperture >85%-95% Chamfer 0.3mm 45°-0.1mm 45° Coating As per customers requirement As a light guide manufacturer, we provide light guide rod, guide rod light, custom light guides, etc. For more information, please feel free to contact us! If you are looking for a reliable custom lens manufacturer, don't hesitate to contact us!
