All-dielectric self-supporting optical cable products series Single sheath adss (loose tube layer stranded structure, non-metallic strength member, semi-dry water-blocking, aramid yarn strength member, pe outer sheath)
Indoor optical Cable: 1)Tight Buffer Fiber, 2)Simplex Cable(SXC), 3)Zipcord Interconnect Cable(ZCC), 4)Flat Fiber Ribbon Cable(RBC), 5)Multi Purpose Break-out Cable(BOC), 6)Multi Purpose Distribution Cable(MPCâ?¤12f), 7)Multi Purpose Distribution Cable(MPC>12f), 8)Waterproof Cable(GJA), 9)Bow-type Drop Cable(GJXFH), 10)Self-supporting Bow-type Drop Cable(GJYXFCH), 11)Bow-type Drop cable for duct(GJXFHA)
CAT6A, UTP CAT6 CABLE OUT-OIL FILLED CABLE, UTP CAT6 LSOH CABLES, FTP CAT6 CABLE OUT, FTP CAT5E CABLE, CAT5E LAN CABLE OIL-FILLED, FTP+ MESSENGER CABLE-CAT5E LAN CABLE, UTP- CAT5E CABLE FTP CAT5E NET CABLE, LSZH-UTP CAT5E CABLE, UTP CAT6 CABLE, UTP CAT6 CABLE OUT, FTP CAT6 CABLE,
·Description The optical fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides. Then the cable is completed with a black or color LSZH sheath. ·Characteristics · Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property; · Two parallel FRP strength members ensure good performance of crush resistance to protect the fiber; · Simple structure, light weight and high practicability; · Novel flute design, easily strip and splice, simplify the installation and maintenance; · Low smoke, zero halogen and flame retardant sheath. Storage/Operating Temperature : -20â?? to + 60â?? Need a quick quote ,please send your requirement to our Email:selia@ksdcable.com www.ksdfibercable.com
·Description The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, the cable is completed with a PE sheath. ·Characteristics · Good mechanical and temperature performance · High strength loose tube that is hydrolysis resistant · Special tube filling compound ensure a critical protection of fiber · Specially designed compact structure is good at preventing loose tubes from shrinking · PE sheath protects cable from ultraviolet radiation · The following measures are taken to ensure the cable watertight: - Single Fiber Reinforced Plastic as the central strength member - Loose tube filling compound - 100% cable core filling - APL moisture barrier ·Standards GYFTA cable complies with Standard YD/T 901-2001as well as IEC 60794-1. Want to know the details,please send your requirement to email:selia@ksdcable.com www.ksdfibercable.com
·Description indoor fiber optical cable is made by evenly applying strands of Aramid yarns as the strength member over tight buffer fibers and then is completed with a flame-retardant sheath. ·Characteristics · Good uniformity of the outer diameter of tight buffer fiber and excellent strippability · Good performance of flame-retardant · Low induced attenuation within the operating temperature range · Excellent geometrical dimension of the fiber ·Application · Data communication · Making connector · Installation: riser, plenum, etc. · Places where waterproof is not strictly required · Making jumper, pigtail and building distribution ·Description · 1fiber, Φ900μm or Φ600μm Tight buffer fiber, Aramid yarn, PVC Jacket. ·Standards · Comply with Standard YD/T 1258.2-2003, ICEA-596, GR-409, IEC794, etc; and meet the requirements of UL approval for OFNR and OFNP. Want to know the price,please contact us. www.ksdfibercable.com email:selia@ksdcable.com
Description The Simplex fiber optic cable uses single 900µm tight buffered Tube structure as fiber optic transmission medium, covered with aramid yarn and armored as strength member then extruded with thermoplastic polyurethane Application : 1. Military Communications 2.Coal, oil, natural gas, etc. 3.Geological exploration Communications 4. Broadcast television, 5.Emergency reopened optical fiber communication
Description: Outdoor FTTH Drop Fiber Optic Cable is consists of GJXFH/GJXH cable and an additional stranded messenger wire. Application : 1. All types of fiber cables with different structures 2. High performance optical network operating 3. High speed optical routes in buildings (FTTX) Note: 1.Cables can be supplied with a range of single mode or multimode fibers. 2. The dimensions and raw materials can be designed according to the demand of the customers. 3. Standard Reel Length: 2000m/reel: other lengths available on request.
Description: Loose Tube Optical Ground Wire is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires. are the most widely used cables ,their design is fully adapted to the most common electric line needs. Application:Aerial/ground(earth) wire. Note: 1.Cables can be supplied with a range of single mode or multimode fibers. 2.Specially designed Cable structure is available on request. 3.Cables can be supplied with dry core or semi dry core
Description: The central Al-covered steel tube is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires. Al-covered Stainless Steel tube design increases the cross section of AL, to reach a better fault current and lightning resistance performance. Apply to the transmission line which requires small diameter and large fault current. Application: Aerial / ground (earth) wire. NOTE: 1.Cables can be supplied with a range of single mode or multimode fibers. 2.Specially designed Cable structure is available on request. 3.Cables can be supplied with dry core or semi dry core
Description: KSD simplex fiber optic cable comes with a single buffered fiber,aramid yarn strength members and low smoke zero halogen(LSZH)/PVC/TPU outer jacket. Application : 1. Terminated with various types of connectors 2. As pigtail of communication equipment 3. Suitable for communication equipment served Note: 1.Cables can be supplied with a range of single mode or multimode fibers. 2. The dimensions and raw materials can be designed according to the demand of the customers. 3. Standard Reel Length: 2000m/reel: other lengths available on request.
Description Micro air blown fiber optic cable is mainly used in access network and metropolitan area network. By air blowing installation technology, without excavation surface in tiny pipe installation, also can be installed in the existing cable pipe,save pipeline resources, meet the real time capacity of the network. We communication provides the micro optical cable technology can reduce the early stages of the fiber optic cable construction cost,increase investment according to the demand of the network, to speed up the return on investment, is an good solution of FTTH. Note: 1. Cables can be supplied with a range of single mode or multimode fibers. 2. The dimensions and raw materials can be designed according to the demand of the customers. 3. Standard Reel Length: 3000m/reel: other lengths available on request.
Description: The ST fiber patch cord use a long 2.5mm diameter ceramic ferrule (or stainless alloy / plastic ferrule). It mates with an interconnection adapter and is latched into place by twisting to engage a spring-loaded bayonet socket. It is the most popular connector for multimode fiber optic LAN applications Features 1. Compliance with IEC, JIS, Telcordia 2. Twist-lock bayonet coupling mechanism which ensures quick, highly repeatable, low-loss connections 3 Simplex, duplex, and multi-fiber assemblies in standard and custom configurations 4. Single mode and Multimode 5. PC finish Applications 1. Premise installations 2. Telecommunication networks 3. Metro networks 4. Local Area Networks (LANs) 5. Data processing networks 6. Instrumentation Our Fiber Patch Cord and Fiber Pigtail range offers choices of any length, connector types and either PVC or LSZH sheath, All of our cable assemblies are composed of our top quality Ceramic Ferrules and Fiber Connectors housings ensuring a stable performance at a high quality level. Besides standard Fiber Patch cord, we also offer other types of Fiber Patch cord assemblies,Armored fiber patch cord, Waterproof fiber pigtail for different applications.
Description: GJDFBV flat ribbon cable uses fiber ribbon as optical transmission medium, covered with aramid yarn as strength member, then extruded with a PVC sheath. Other sheath materials, like LSZH and TPU, are available on request. Application : 1. Ribbon fiber flexible connection jumper 2. Various indoor cabling solutions. Especially used in good laying conditions. 3. Interconnection between apparatuses Note: 1.Cables can be supplied with a range of single mode or multimode fibers. 2. The dimensions and raw materials can be designed according to the demand of the customers. 3. Standard Reel Length: 2000m/reel: other lengths available on request.
Description: Composite or Hybrid Cables are cables that have a number of different components laid up within the bundle. These types of cables allow for multiple transmission paths by various components, whether they be metal conductors or fibre optics, and allow the user to have a single cable, therefore reducing the overall cost and lead time for installation. Application: 1.Used in outdoor applications that require both optical fiber and copper wire elements for communication and power 2.Copper wire can power remote electronics used in fiber optic communications 3.Copper wire can also be used for low data rate data transmission 4.Deployable cables have been used in network and private broadcast applications around the world 5.Cables can be designed for your custom applications Note: 1.Different conductor specification can be make as required. 2.Different Fiber specification can be make as required.
Applications: 1.Telecommunication Network 2.CATV Network 3. Local Area Network 4.Active device termination 4.Data system networ Features: 1.Compliant with: IEC, JIS, Telcordia 2.Customer length 3.Minimum loss
Description: SC-LC/PC multimode duplex fiber optical patch cord 1. CE,RoHS,ISO9001 2. High reliability,low insertion loss 3. 100% Manufacturer 4. IL=55d 5. full tested for all of productes customersâ?? ordered 6. free samples provided Features: 1.Using high precision ceramic ferrule 2.rubbing exactitude and testing completelly 3. low insertion loss and high return loss 4. high stability and repeat 5.be according with the telcordia GR-326-CORE standard 6.ferrule:excellent quality and high intensity zirconium dioxide ceramic ferrule Application 1.Telecom Network 2.LAN and WAN 3.CCAV and cable TV 4.Multimedia 5.Active device termination 6.Testing equipment 7.Data processing system 8.Premise installation
3g-sdi fiber optic extender offers the digital transmission of fully uncompressed sdi (270mbps), hd-sdi (1.485gbps) , 3g-sdi(2.97gbps)by single fiber overbroadcast quality with audio, rs485/rs232/rs422 serial data, loopback output and ip ethernet transmission. It is broadcasting quality, could compatible with asi, ts stream.
Plano-convex lenses are useful for a wide range of applications. These lenses are manufactured from BK7A grade A (or customer design) optical glass and are supplied uncoated. Anti-reflection coatings are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may also be used as mirror blanks if a convex surface mirror is required. When used to focus a collimated beam, the light should be incident on the curved surface of the lens. These plano-convex lenses may be combined with other lenses to form compex imaging systems.
