Product description of simplex tactical fiber optic cable for broadcast television communication In the gyts cable, single-mode/multimode fibers are positioned in the loose tubes, while the loose tubes strand together around the strength member into a compact and circular cable core.The strength member would be covered with polyethylene (pe).The water-blocking materials are distributed into the interstices of the cable core.Then the cable is completed with a pe sheath. ?product features of simplex tactical fiber optic cable for broadcast television communication 1.Excellent mechanical and temperature performance.Critical protection to fibers. 2.Excellent ultraviolet prevention with pe sheath. 3.Excellent crush resistance and flexibility. 4.The following measures are taken to ensure the water blocking performance of the cable: - single steel wire strength member used as the central strength member - special water-blocking filling compound in the loose tube - 100% cable core filling
Product Description 1) Gel filled mulit loose tube provide good protection for the coating fiber 2 Steel wire/FRP as central tension strength 3) Good ultra violet radiation resistant 4) Double sheath and conrrugated steel tape armored..Good moisture-resistance. 5) Single mode G652D fiber type . APPLICATION 1) Adopted to Outdoor Direct buried,Aerial, Duct installation 2) Access network and local network in high electromagnetic interfering places. Information OF 12CORE GYTA53 FIBER CALBE No. of Tube 2Looses tube+4Filler tube No. of fiber/Tube 6Fibers No. of fiber 12 Fibers Approx. Cable Diameter 13.4~19.6mm Loose Tube Material PBT Filling compound (Tube) Thixotropic Jelly Strength Member Steel Wire or FRP Water Blocking Water Swell able Material Corrugated Steel Tape Nom. 0.25mm Thick. Outer Sheath Nom. 2.7mm Thick. Black MDPE Mechanical & Environmental Performance Tensile Strength Long Term: 1000N, Short Term: 3000N Crush Resistance Long Term: 1000N, Short Term: 3000N Bending Radius Long Term: 10D, Short Term:20D Storage Temperature -20~+60°C Optical Fiber Performance Fiber Type G.652D,125.0±1.0µm Mode Field Diameter 9.2 ± 0.2µm at 1310 nm Cladding Diameter 125 ± 1µm Cladding Non-Circularity: = 1% Coating Diameter 245 ± 10µm Attenuation Coefficient = 0.36dB/km at 1310nm, = 0.22dB/km at 1550nm Chromatic Dispersion =3.5ps/nm/km at 1285~1330nm, =18ps/nm/km at 1550nm Zero Dispersion Wavelength 1300~1322nm PMD Coefficient = 0.2ps/vkm
Single mode and multi mode SC fiber optic patch cables, SC-LC, SC-ST, SC-FC, SC-MU, SC-MTRJ, SC-E2000, 9/125|¨¬m, 50/125|¨¬m, 62.5/125|¨¬m, SM, MM, UPC, APC, PC. Customized design cables are available. The SC fiber optic patch cord is one of the earliest type and one of the most commonly used fiber optic cable, it is convenient to use and cost saving, It is the most cheapest type fiber optic patch cable. SC fiber patch is widely uesed in fiber optic networks. SC fiber patch cable is with zirconia sleeve and plastic housing. SC Fiber Optic Patch Cord Features: Low insertion loss. High return loss. High stability and reliability. SC Fiber Optic Patch Cord Applications: FTTH, LAN, PON & Optical CATV Local ring net Optical fiber communication system Optical fiber test equipment Optical fiber sensor 1pc/PE bag,100-300pcs/CTN.
Housing metal With flange for fixture Snap-in fixing Version MM/SM ROHS as per factory, also OEM
The MPO / MTP patchcords are simplex multi-fiber Cable using the MPO / MTP connector in fiber counts of 4, 8, 12, 24 or 48. They offer Male and Female MPO / MTP connectors on each end. Available in 4~48 fibers versions as well as multi-mode (62.5/125, 10G OM2 / OM3 / OM4, Bend-insensitive fiber, etc.) and single-mode (G652D, G657A1 etc.) fiber types.
Combining 12~144 fiber trunk cable with 12F MPO/MTP and generic connectors, Gigalight;trunk cable assemblies contain MPO to MPO and MPO hybrid types. Plug and Play Reels, Pulling eye are designed to be quickly pulled and connected to Plug and Play Modules and Adapter Plates. Customized configurable to precise application requirements, these reels or pulling eye are efficiently put high-performance, high-density fiber connections exactly where you need them.
Low insertion loss. High return loss. High reliability and stability. Excellent exchangeability and durability. FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO, etc is available. PC, UPC or APC polishing. Single mode and multi-mode available. Simplex, duplex or fan-out available. ;0.9, ;2.0, ;3.0 available. Length: 1m, 1.5m, 2mor customized. PVC, LSZH or Hytrel available. Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
Low insertion loss. High return loss. High reliability and stability. Excellent exchangeability and durability. FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO, etc is available. PC, UPC or APC polishing. Single mode and multi-mode available. Simplex, duplex or fan-out available. ;0.9, ;2.0, ;3.0 available. Length: 1m, 1.5m, 2mor customized. PVC, LSZH or hytrel available. Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
Low insertion loss. High return loss. High reliability and stability. Excellent exchangeability and durability. FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO etc. is available. PC, UPC or APC polishing. Single mode and multi-mode available. Simplex, duplex or fan-out available. ;0.9, ;2.0, ;3.0 available. Length: 1m, 1.5m, 2mor customized. PVC, LSZH or hytrel available. Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
Savofil, Savoflod, Vitagel Cable Filling Compounds & Optic Fibre Compounds Telecommunication Compounds Telecommunication Compounds are used in the manufacture of Copper Cables as well as Optic Fibre Cables. These compounds are gels manufactured by blending specially selected Base Oils with waxes and thermoplastic elastomers. The resulting gels are used as filling compounds and flooding compounds in Copper Cables as well as Optic Fibre Cables. Applications The compounds fill voids in polyethylene insulated and sheathed Telephone Cables. Their basic function is to prevent moisture penetration into the cables in case of any damage to the cable sleeve. The filling compounds used in Optic Fibre Cables have to meet specification related to moisture tolerance, softness at low temperature down to -40 deg C and stability at a high temperature of 150 deg C. Savita offers wide range of products meeting these requirements of customers across the Globe. Products offered Savita offers two products for Copper Cables â?? Savofil and Savoflod. Savofil is used as a filling compound, while Savoflod is used as a flooding compound. Both products meet the requirements and specifications of national and international customers. For the Copper Cable industry, Savitaâ??s products for filling and flooding can be processed by melting as well as by pressure filling. For filling with pressure, gel is designed with appropriate thixotropic properties. For the Optic Fibre Cable industry, Savita offers 2 products â?? Vitagel MS and Vitagel F, meeting national & international standards. Characteristics The products for Copper Cables - Savofil & Savoflod - for filling and flooding respectively can be processed either by melting or application of pressure. For filling with pressure, gels are designed with appropriate thixotropic properties. Vitagel MS, used in Optic Fibre Cables, is a filling compound which is directly in contact with sensitive Optic Fibre. This gel has excellent low temperature and high temperature properties. It is stable over the temperature range of -40 deg C to 150 deg C and meets national & international standards. The product also has very good rheological properties making it suitable for processing under pressure. Savitaâ??s flooding gel, Vitagel F, is also designed to meet national and international specifications. Gels For Cable Connectors These are gels made from specially selected Base Oils, new generation polymers such as thermoplastic elastomers and special hydrophobic silica. The Connector Compound CN 11 is designed for high thermal, oxidative and hydrolytic stability.
High quality zirconia ferrules. Good repeatability and interchange. Flame-retardant, rugged and durable jacket. Printing helps clarify and recognize different cables. Factory terminated and tested for insertion loss, return loss and end face. Standard connectors LC, SC, ST, FC, E2000,DIN, MTRJ, MU are available. �· Singlemode (OS2) and multimode (OM1, OM2, OM3, OM4, OM5) are available Application Data Center Enterprise Fiber to the X (FTTX) Local Area Network and Wide Area Network (LAN and WAN) Community Antenna Television Network (CATV Network) Telecommunications Network
The fibers, 125μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core. Then the cable core is covered with a thin polyethylene (PE) inner sheath, which is filled with jelly to protect it from water ingress. After a corrugated steel tape armor is applied, the cable is completed with a PE outer sheath.
High dense space.Ceramic ferrules connector.Low insertion loss.High return loss.Excellent mechanical endurance.High credibility and stability
The 40ch DWDM MUX DEMUX is designed by FIBERWDM, wavelength fromC21 toC60(1560.61nm~1529.55nnm), in accordance with the ITU-T G.694.1 100GHZ grid, it maximizes the capacity of the C-band range. The 40ch DWDM with 1310nm port is totally passive DWDM device, and support low insertion loss( wavelength ports 3.5dB; 1310nm port 0.8dB).And it conjunct with The DWDM amplifiers and DCM device, the 40ch DWDM transfer system can support a long distance transmission.
We are looking at approx. 582 km of fiber optic cable. Necessary documentation and additional information will be sent via e-mail.
1. Descriptions Mechanical Splice, namely Quick Splice, is a fast connection method of Optical Fiber, very easily installable and re-usable, no need splicing machine or adhesive, mainly used for drop cable quick repair 2. Features Proven mechanical splice technology, accurate Optical Fiber alignment A-level Zirconia ceramic V-groove design, high Optical Fiber docking accuracy, low Insertion Loss of 0.15 dB Precise metal alloy components coaxial autocollimator on the core, durable connection Low thermal expansion/contraction coefficient core material , strong environmental adaptability High tensile strength 50N Simple operation - without fusion splicing, fast installation - 10s splicing, high success rate - 99% Applicable Optical Fiber Cable 2.0mm, 3.0mm, 2.0*3.0mm Suitable Optical Fiber 250/900um SM/MM Different models for different scenarios, Black or White color usually Long service life 10 years, simple and convenient later maintenance Product warranty 12 month, no quality worry 3. Applications FTTX deployment Optical Fiber Cable repair Data communication 4. Specifications Insertion loss: average: 0.15dB, max. 0.20dB Return loss: 50dB Tensile strength: 50N Working temperature: -40C - +85C Repeated assembly times: 10 Splice size: 38*6.4*3.9 mm Protector size: 90*8.6*7.4 mm Package: 50 pcs/box 5. Advantages & disadvantages Advantages: price just 30% - 40% of top quality Optical Fiber Mechanical Splice like 3M, Fujikura, Corning, etc. Disadvantages: insertion loss (IL) 0.15dB, a little higher than top quality, whose insertion loss (IL) 0.10dB, but still lower than 0.20dB ~ 0.30dB of many other suppliers Conclusion: economic product
It is used for high-speed Ethernet signal transmission, which can transmit network signals over a long distance through two-core cables, and is suitable for places where network cable transmission is inconvenient.
CPRI fiber patch cable is the ideal design for outdoor fiber cable applications. Such product can meet the FTTA(fiber to the Antenna) program requirements for outdoor environment conditions. Especially in the 3G, 4G, Base station (BBU to RRU). CPRI fiber patch cable are rapidly becoming the standard connector interface. Product feature Ideal for outside cabling application Armored steel tape for rodent resistance Pressure resistance Fully water-blocked Moisture blocking loose tubes Fiber 2 core or 4 core Easy Operation, reliable and cost-effective Applications FTTA & FTTH Base station, BTS installation, BBU to RRU Indoor/outdoor building cabling Harsh environments application Long haul networking Direct burial and aerial lashing
Application: - Telecommunication network - CATV system - Local Area Network - Active/Passive device Feature & Benefits - Meets Telcordia GR-326-core, JIS C-5973, TIA/EIA 604 - Customer length - Various connector type available - Environmental stable
LC APC -LC APC 1 meter LSZH SM 1 Meter : 0.65$ 5 Meters : 0.78$ 10 Meters : 0.95$ 20 Meters : 1.4$ 50 Meters : 2.9$ Payment : T/T Or LC . ( Credit available from second order )