Find Verified Cold Rolled Coils Suppliers, Manufacturers and Wholesalers

Antibacterial wet wipes, mobile chargers, mobile usb cable, paper cup, roasted coffee beans, espresso, steel coils, razor, belts, sesame seeds, face shield, tapioca starch, tapioca chips, aluminum ingots, zinc ingots, samsung usb chargers, iphone charger, silica sand, basil leaves, onion.

With multi-direction air flow supply, automatic swing wind, users can set auxiliary wind gap to send part of air to other place, so as to improve the indoor temperature and the air flow uniformity. System adopts big diameter vortex centrifugal fan to make running silently, and optional anion generator to make pure and fresh indoor air. Ultrathin frame, min-thickness for frame is only 260mm, users can chose installation direction for connection pipe depending on spot situation, the overall dimension for part of unit is only 590x590mm easy installation with low installation cost. Remote control is available, flexible control method. High lift water pump design (750mm); Disposal of condenser water pipes is easy and flexible. Water level switch protection ensures no water leakage, water in the discharge pan can be discharged manually; and the water holder pan is designed with discharge hole, which can discharge the remaining condenser water on time, so as to reduce the possibility for bacteria growth, meanwhile discharging dirt in the regular time reduces clogging probability for water pump. â??Câ?? type heat exchanger can aid terminal air flow and the uniformity for cooling system, the effect for 4-way air-out can be more balanced, and system leak out possibility can be lower. Hydrophile aluminum coil fin can greatly reduce condensation water remaining on the fin, therefore it reduces the windage and the effect for heat exchange is also improved. Available for BMS concentrate intelligent control system. And some more designs for easy installation including built-in water valve (optional) for easy exterior connection installation, hand protection grilling and stainless steel soft pipe connection.

Because of the bright future of the universal requirement for DRI briquette over the next two decades, a new method was created in 2009 in Iran to produce a cold briquette of CDRI (Patent No. IR60923). Cold-Briquetted Sponge Iron (CBSI) was the name given to the new product. Afterward, following pilot-scale and performing various laboratory studies, Cold-Briquetted Iron and Carbon (CBIC) was invented in Iran as a premium product over CBSI because of the prior�¢??s higher carbon content sand higher efficiency through processes of steelmaking (Patent No. IR84090). Owing to the fact that the cold-briquetting process of DRI is being done under high pressures, the density and mechanical strength of CBIC should be higher and the surface area and also porosity should be less than DRI�¢??s. thus, the oxidation rate, dust and fine generation rate, and the moisture adsorption capacity of DRI will considerably decrease through the process of cold briquetting. These improvements would have big technical, economic and environmental effects on direct reduction and industries steel manufacturing and will push them heading for more sustainability

Corrugated cartons, telescopic top and bottom box, die cut trays, assembled partitions and single face corrugated rolls for cushioning and protection, and wax lined cartons for frozen products.

Organic insecticides and repellents.

Although the usage of Bitumen refers to the ancient time and millenniums before BC for excellent adhesive and waterproofing, still, it has a significant impact in modern lives, construction, surfacing airfield runways, taxi tracks, waterproofing, rolling roads and highways. Today the world's demand for Bitumen accounts for more than 100 million tons per year, which is approximately 700 million barrels of Bitumen consumed annually. Applying experience gained in the industry, our highly qualified staff are backing Arij's mission to provide their customers with goods manufactured to the highest standards of Bitumen. We have established long-lasting and close partnerships with manufacturers and refiners from the gulf regions which brings us valuable complements of supplying all types and grades of Bitumen such as Penetration Grade Bitumen (Asphalt), Viscosity Grade (VG) Bitumen, Performance Grade (PG) Bitumen as well as other special types such as Polymer Modified Bitumen (PMB), Bitumen Emulsion (Asphalt), Oxidized Bitumen (Blown Asphalt) and Cutback Bitumen, in any kinds of packages based on customers' requirements

Steel Billet, also called bar stock, is technically a semi-finished casting product that needs further processing before becoming a finished material. Actually, since billet is grained in its structure as a metal it processes very intricately. Steel Billet is, in fact, a length of metal with a square or round cross-section. It is used in general and structural purposes. Pipes and wires are 2 of the main products made with billets. Billets are also used as raw materials or feedstock in forging, rolling and other metal-processing operations. The range of semi-finished products above 155 mm x 155 mm is called blooms. Blooms have rectangular cross-sections. The name Bloom comes from Bloomery. Another condition for a bloom is that the cross-section must be greater than 36 sq. inches. We in Arij supply high-quality Cast Square Billets of varied lengths and cross-sections. However, standards for steel billets vary and each must feature the chemical composition necessary for producing the desired product. We provide international specifications including BS, ASTM, EN, etc. or any other tailor-made requirements of our clients. different grades: 5Sp 3sp different cross sections: 150*150 mm 130*130 mm 125*125 mm

The rapid expansion of high-power EAFs (Electric Arc Furnace) has increased the interest to use DRI as a great option for the continuous charging of electric furnaces in developed countries. Sponge iron is a valuable source of iron for the production of high-quality steel. With the Direct Reduction technology that has been developed considerably in recent years, sponge iron melting in electric arc furnaces has more qualitative advantages than scrap metal smelting for steel making. Some of the benefits include: More specific chemical composition Low levels of impurities (gangue, sulfur, and phosphate) The impossibility of using cheap scrap Easy storage and shipment Continuous automatic charging Predictable price structure Fixed power of input electricity Relying on the knowledge, valuable experience and history, and empowerment of our team, we, Arij Global Trading Co. are supplying our high-quality gas-based DRI to the far destinations in containerized and bulk shipment. As a supplier of gas-based Sponge Iron with a great history and experience, we also provide cost-effective solutions for the shipment to our customers in complete accordance with their needs, which ultimately fulfills the goal of providing satisfying service.

HBI is the preferred DRI product for the merchant metallic market; Because it is much denser than CDRI, which reduces the re-oxidation rate. In fact this enables HBI to be stored and transported without special precautions under the International Maritime Organization (IMO) code for shipping solid bulk cargoes. Besides we can use it the EAF, BF, and BOF. Consequently, HBI which is the product of compressing DRI discharged from the MIDRE Shaft Furnace at 650 C into pillow-shaped briquettes; with a typical size of 30 x 50 x 110 mm and a density 5 gm/cc. No binder is used to make HBI.

In different countries, rebar is produced based on different standards, and in each standard, there is a definite classification in relation to the mechanical properties of steel. Most of the steel mills production complies with the Russian standard which is divided into three types of A-1, A-2 and A-3 steel. The A-1 grade is of a flat type. The yield strength and tensile strength (rupture stress) are 2400 and 3600 kg / cm2, respectively. The A-2 grade is of an indented bar type with the yield strength of 3400 and a tensile strength of 5000 kg/cm2. The A-3 grade is also of an indented bar type with a yield tolerance of 4000 and a tensile strength of 6000 kg/cm2. Arij Global Trading, with years of experience in supplying steel products, supplies the best quality of Rebar according to the world standard properties.

Wire Rod is used in the industry in two types of indented and plain with the size of 5.5 mm to 16 mm. Wire Rod is manufactured in the factories up to the size of 12 mm, and the higher sizes are produced according to the order. Also, the indented wire rod is divided into two categories of A2 and A3. Wire Rod is used for different products and is the raw material for the wire drawing units, fasteners, automobile components, and hardware manufacturers. With a successful history of supplying and exporting steel products, we have effectively positioned Arij Global Trading to meet the various requirements of our clients in different countries with the highest standards of quality of Wire Rod.

It is obvious that Cement is a very useful binding substance in construction. The usage of cement over diverse fields of construction has made it a very significant civil engineering material. Arij Global Trading is an Ordinary Portland Cement supplier connected to well respected Portland Cement manufacturers in the area. Our precious contacts in this industry empower us to comply with most inquiries for Portland cement at exceptionally competitive prices. Ordinary Portland cement (usually referred to as OPC) has different types and classes for different uses and applications. We are a Portland Cement supplier who provides different types of this commodity from General purposes use to high sulfate resistance conditions; From Moderate Heat of Hydration to Low Heat of Hydration and high early strength cement depends on your demands. Arij Global Trading also provides all cement types based on their applicants.

Ordinary Portland Cement Clinker is the core component in producing cement which is formed by sintering limestone. In the manufacturing of Portland cement, clinker formed by sintering or fusing together without melting to the point of liquefaction, alumina-silicate materials such as clay and limestone during the cement kiln stage and happens as 3 millimeters (0.12 in) to 25 millimeters (0.98 in) in diameter, Ordinary Portland Cement Clinker is then ground to a fine powder and used as the binder in many Cementous goods. Sometimes, a little gypsum is also added. If stored in dry conditions, Cement Clinker can be kept for several months without considerable loss of quality. Because of this fact, and because it can be easily handled by ordinary mineral handling apparatus, Cement Clinker is highly traded intercontinentally in large quantities. At their cement plants, cement manufacturers which purchase clinker usually grind it as an addition to their own clinker. Producers also tend to ship their clinker to grinding plants in zones where cement-making raw materials are not available. Arij Global Trading LLC, one of the independent traders of different types of clinker, gray and white in the area, supplies tons and tons of clinker annually. Arijâ??s special performance has led us to strong partnerships with global cement manufacturers as well as end-users. The Arij Global Trading has aggressively expanded its sources for clinker as well as other related merchandises to offer the most competitive rates under both CFR and FOB terms.

White Cement which is extensively used in designing and decorative construction is highly in demand and has extremely white display color as against the normal cement. White cement due to its whiteness is mainly used for architectural beauty, interior and exterior decorations, floorings, ornamental concrete products White Cement can be used in different construction products. Some of them are listed below: Architectural precast construction Exterior cladding & siding products White masonry & colored mortars In-ground pools & pool finishes Manufactured stone veneer Concrete roof tile Tile adhesives And etc. Arij Global Trading works as a white cement supplier and one of its main activities is dedicated to seaborne exports of White Cement in break bulk and containerized bags. The White cement is procured from supreme manufacturers to give you an elite product. In another word, Arij Global Trading is connected to well-respected Cement and Clinker manufacturers in the area. Our precious contacts in the Mining industry empower us to comply with most enquiries for a different type of Portland Cement and also White Cement at much competitive prices. We only work with reliable factories and select the cement on hard quality criteria. That is also why you are not just one step away from getting any type of Portland cement delivered. So please send your specifications in order to receive a competitive rate under both CFR terms. 42.5 R White Cement is commonly used in decorative concrete products and tiles. White Cement grade 42.5 R is suitable for all other applications where the very high strength 52.5 cement is not required. 42.5 N White cement is similar to grey Portland cement but the only vary is in the color and fineness. This color of this cement is determined by its raw materials and the process of manufacture

White Portland Clinker or White Ordinary Portland Clinker is resembling Ordinary Gray Portland Cement in all features except for its high grade of whiteness. In white cement, the index of whiteness is a very significant parameter to be controlled. Nevertheless, white cement encompasses a very low volume of iron because it diminishes the whiteness, which infers negligible content of C4AF. Therefore, white clinker encompasses three major ingredients: Alite as C3S, Belite as C2S, and Celite as C3A. Unlike Gray Cement Clinker, the White Clinker does not contain Felite or Tetracalcium Aluminoferrite as C3AF which is the only dark-colored phase. Gaining this white color needs considerable alteration to the method of production, therefore, White Clinker is to some extent more expensive than the gray product. In Arij Global Trading Company, we are honored to inform our dear customers from all over the world that we supply White Cement Clinker with two different specifications. White Clinker can be delivered either in bulk vessel or in 1 to 1.5 MT of Jumbo bag and then stuffed in the container or be shipped in the break-bulk vessel, as per our dear customers request. If you need to know more about White Cement Clinker, please do not hesitate to contact us through

Ground Granulated Blast Furnace Slag (GGBFS) is a by-product from the manufacture of Iron and a high-performance substitute to traditional cement that will rise the technical presentation of your application, improve its appearance and minimize its environmental impact. GGBS is used in combination with Portland cement to produce superior longer-lasting concrete. GGBS will improve performance in any situation, from housing to civil engineering applications. GGBFS also improves the concrete toughness, reduces preservation and repair costs, progresses workability and compression features, extensions compressive and flexural strengths, decreases cement and water consumption, advances concrete grading and also improves impermeability and water resistance. Arij Global Trading LLC is a professional Ground Granulated Blast Furnace Slag supplier. We are a global company operating in the fields of the mineral industry, trade, and logistics. Reliable and responsible entrepreneurship, combined with flexibility and innovative logistics solution, plus our motivated and skilled employees, our core proficiencies and efficient work processes, we continuously achieve an above-average value contribution. GGBFS Ground Granulated Blast Furnace Slag (GGBFS) is gained by grounding the Granulated Blast Furnace Slag into the desired fineness. This product is usually intended to be used in concrete either as an element of composite cement such as Blast furnace Cement/High Slag Blast Furnace Cement or as a straight addition to the concrete mix by the concrete producer. GBFS Granulated Blast Furnace Slag GBFS can be used like sand as an additional aggregate for building materials. Granulated Blast Furnace Slag is obtained by quickly chilling (quenching) the molten ash from the furnace with the help of water. Throughout this procedure, the slag becomes fragmented and changed into amorphous granules (glass).

Bentonite referred to as either Calcium Bentonite or Sodium Bentonite is generally one of the most multi-functional minerals. Basically, the inherent physical properties in Bentonite provide a wide range of industrial applications and since the Middle East is specifically rich in this mineral resource; therefore you can locate the best quality of varied grades of Bentonite in here. The quality and grade of Bentonites modifies their applications in particular. However, the demand for Bentonite varies significantly from country to country. Our expert commercial team in Arij is well-prepared to supply from lump size to fine powder in suitable packaging for different sizes. Here are the major application areas of Bentonite: Foundry: Building agents for special molding sands, Bindings agents for synthetic molding sands, core sands, binding agents for anhydrous casting sands and for thickening blackwashes. Drilling Industry: Borehole scavenging for saltwater/Thixotropic suspensions for borehole scavenging Building Industry: Supporting suspensions for cut-off diaphragm wall constructions and shield tunneling/subsoil sealing (e.g. dumps) anti-friction agents for pagejacking and shaft sinking additive for soil concrete, concrete and mortar. Ceramics Industry: Plasticizing of ceramic compounds, Improvement of strength, fluxing agents. Paint and Varnish: Thickening, Stabilizing and anti-setting agents for paints, varnishes, coating materials, sealing cement waxes and adhesives. Ore Production Industry: Binding agents for ore pelletizing. Paper Industry: Pigment and color developer for carbonless copying paper/adsorption of impurities in the white water system.