Applications: Determination of geothermal gradients Correction of other logs Measuring tool head tension Specification : Measuring range Mud resistivity: Mud temperature: Tension :-2, 200 lbs~+6, 000 lbs ¨-1, 000 kg~+2, 700 kg Measuring accuracy Mud resistivity: 10% of the measured value Mud temperature (1 + 1% of the measured value) Tension : (68kg + 3% of the measured value) Resolution Mud resistivity: 1% Mud temperature:32.18 ¨h (0.1 ) Tension:10 lbs (4.54 kg) Max. Logging speed:32 ft/min (10 m/min) Tool od:3.6 in. (92 mm) Make up length:66.6 in. (1, 692 mm) Shipping length:84.1in. (2, 135 mm) Tool weight:92.6 lbs (42 kg)
Features: The latest Complex Programmable Logic Devices and Digital Signal Processing are used to ensure the fastest amd most reliable operation. The system design optimies the human / machine interface for simplicity of operation and ease of use. Applications: Logging control Power supply for logging sondes Data processing Data recording Plotting Tool calibration Data acquisition Display Data playback and editing Measuring Range : Operating Temperature:0 Centigrade to 50 Centigrade (32 Fahrenheit to 122 Fahrenheit) Storage temperature: -20 Centigrade to 75 Centigrade(0 Fahrenheit to 167 Fahrenheit) Relative humidity:
Features: Multi-array induction tool coil system adopts asymmetry structure with one transmitter coil and eight receiver coils. It works at three frequencies. Multi-dsp and array coil system are adopted in the tool. The multi-channel, multi-frequency weak signal pick-up in the tool is achieved by real-time calibration, digital filtering and digital phase-sensitive detection technology. A lot of mechanical and electronic measures have been taken for reaching the desirerable tool stability and high reliability. Due to the excellent performance, high reliability and high accuracy of multi-array induction tool, many oil companies decide to adopt multi-array induction tool as one important part of their logging program. Specification : Temperature:311 ¨h(155 ) Pressure :14503.8 psi (100 mpa) Data transmission:430 kbps/100 kbps Accuracy: Vertical resolution : 0.75 ms/m or < 2% 1.81 in., 23.62 in., 47.24 in. (30cm, 60cm, 120cm) Investigation depth:9.84 in., 19.69 in., 29.53 in., 59.05 in. 88.58in. (25cm50cm75cm150cm225cm) Applications: Accurate formation resistivity measurement with three vertical resolutions and five investigation depths Accurate oil/water saturation evaluation (both oil saturation and residual oil saturation) Thin layer analyses in laminated reservoirs Oil/water zone identification by resistivity profile images in many difficult cases, like deeply-invaded formations etc. Resistivity measurement in oil-based mud or air-filled boreholes.
Grades: j55, n80-1, n80q, l80, c95, p110
Grades: PSL1B Standard: API 5L
Grades: 20G, 15CrMoG, 12Cr1MoVG
Grades: E75, X95, G105, S135 Specification
Series jzs engine oil regeneration system is mainly for regenerating the waste engine oil, this equipment can effective separate water, gas, particles, deeply oxides, free carbon, colloid, asphalt and wax from oil, making black engine oil become transparent golden color. This equipment has the functions of dewatering, degassing, discolor. Improving the engine oil's properties, restoring the oil's performance and lowering wear to ensure the engine can work normally and safely, prolonging the engine and engine oil lifetime.
Series tya vacuum lube oil purifier is mainly for purifying unqualified lubricating oil, hydraulic oil, compressor oil, refrigeration oil and other industrial oils, this machine can rapidly separate water, gas, particles and volatile matter (such as alcohol, gasoline, ammonia, etc.) from oil, restoring oil viscosity, flash point and performance. The treated oil can reuse again in various industrial equipments. It is widely applied in petroleum, chemical, mining, metallurgy, electric power, transportation, machinery manufacturing, railway etc.
F series mud pump is applicable to the requirement of high pump pressure in oilfield and high pump pressure in oilfield and high displacement technology of well drilling with its soild and compact structure, small volume and outstanding operation performance. F series mud pump has long stroke maintaining operation at lower frequency resulting in enhancing the performance of giving water effectively and prolonging the lifetime of the consumable hydrokinetic parts. The air-suction kit is advanced in structure and reliable at operation to reach the optimized absorbing target of air suction into linepipe. F series mud pump powering side adopts the combined lubrication of forced and flashing lubrication featured with reliable lubrication and adding the operation lifetime of powering part. F series pump is produced strictly according to api spec 7k "the equipment specification of well drilling and repairing", and performed the ex-work test under the specification thereof.
Dynamic, volumetric.
1. Screens with high open area are more suitable for the construction of high-quality water wells, oil wells and gas wells. 2. Low cost operation screens with high open area shall favor groundwater infiltration. Abundant water shall reduce the water level¡¯s down, thus to save energy consumption. 3. Reduce the abrasion of the pump Under the same condition, high open area can make the speed of groundwaters entering into the screen much slower than any other filtration apparatus, which will avoid sand¡¯s entering into screen because of high pressure, thus reduce the abrasion of the pump. 4. Extend the life span of wells Comparatively, groundwater¡¯s entering into screen with higher open area is much easier than the entering into lower open area screen. The slow water flow shall extend the life span of wells. Slotted pipe Api od:60.32-508mm Thickness:4.24-16.13mm Length:5-10m Material: api j55, api k55, n80, p110
Application This machine is special for recovering and purifying various kind of high-precision lubricating oil such as hydraulic oil, mechanical oil, coolant oil, fear oil, heat treatment oil and so on. Features 1. Strong capability of breaking emulsification 2. The combination of coalescing separation and vacuum dewatering 3. More deeply and precisely fh rectangular filtering system 4. Zn unique technology---H.P.M high polymeric absorbing material. Wooden
Application: This machine is designed for treating unqualified turbine oil, especially the seriously emulsified turbine oil. It can remove water, gas and impurities rapidly and effectively and make the oil regenerated. Features: 1. Fully breaking emulsification by means of polymeric material 2. High-effectively dewatering with once and for two steps dehydrator method, ty series can thoroughly remove the liquid water, free water and 80% of dissolved water 3.With zn q distinctive removing impurities technique filtering through double fh trapezoidal network and absorbing by polymeric material, this machine can make the surpass or equal to 200 and make the cleanness not cleanness not surpass grade 6 (nas 1638) 4. With the trapezoidal, spiral, automatic back flushing system 5. With the advanced dielectric condensation devices 6. On-line oil purification can be carried out with turbine or water turbine automatically Advantages: After demulsification by this machine, the treated oil is hard to be emulsified again. Its dehydration volume is large and it can drain off the water on line. Ty series, which prevent lubrication system from damage, can effectively extend the lifetime of oil and protect turbine and other machines. Wooden
Application: This machine is designed for treating wide range of unqualified insulating oil, including aging transformer oil, mutual inductor oil, switch oil ect. Features: 1.Bi-infrared liquid duplex 3d stereo-evaporation technology, dewatering and degassing effectively 2.Distinctive removing the impurity technology of filtering through double fh trapezoidal network and absorbing by high polymer without the mechanical power 3.Bi-infrared liquid level automatic controller system 4.Trinity inter locked preventive device 5.Either for vacuum oiling machine or vacuum drying machine 6.Automatically testing oil dielectric strength and printing out the result Advantages: This machine is a new-type of high-effective vacuum oil purifier with the duplex 3d stereo-evaporation technology and g technology. Adopting the technology which removes the impurities by using double fh trapezoidal network and high polymer absorbing without any mechanical power. It has 5-8 times effective than common vacuum oil purifiers. Low consumption of energy and less wearing materials are needed. Wooden
Application: This machine is particularly used in such industry as mines, metallurgy, electric power, transportation, mechanical manufacture in which lubrication oil like hydraulic oil, engine oil, car/motor oil, cooling oil etc are used. Gas engine oil used in the field of transportation like shipping, land-carriage etc. also can be treated with regeneration by LYE series machines. Product description: LYE series oil filter machine can treat with regeneration of waste gas engine oil. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource. Features: 1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil. 2. Completely removing water and harmful gas from the waste oil. 3. Recovering the color of the treated oil as fresh oil. 4. Simple operation, safe and reliable. 5. As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements. 6. This system adopts advanced indefinite oil temperature control device, which can set the top and bottom oil temperature discretionarily to avoid frequent motions of beating AC contract and prolong the service life of AC contract. 7. This plant is equipped with integrated protection devices. Through each executive component, it can realize overall self-protection to the temperature, pressure, vacuum level, ultra-pressure etc. wooden
Model yz/xz32-2 screw oil press is the biggest national continuous pre-press and one-tme pressing equipment and suitable for the oil plant to process the seeds containing more oil such as peanut kernels, cottonseed kernels, safflower seed and sunflower kernels. Such equipment has the following advantage: high processing ability; low power consumption; low operation expense, defatted cake being loose but not crushed, is helpful to sovent penetration; low esidual oil rate. The press is the ideal oil press equipment both for large size and middle size oil plant. A.Processing capacity:260-300t/d b.Esidual oil rate of deffatted cake:16-20% c.Power :110kw D.Dimension:4100*2270*3850mm e.N.W :11500kg
Working loads rang from 250t to 500t, and cover pipe sizes from 3¨ö; to 6¨ý od, iu, eu, or ieu. 395kgs
Api 3/4¡± class sm slim hole sucker rod coupling 1) material: aisi 5140 2) standard: api spec 11b 3) main specification: Od:1-1/2" (38.1mm) Id: 1-1/16"(26.99mm) Length: 4" (101.6mm) Weight: 0.47kg 4)other size: 3/4¡±; 7/8¡±;1¡±; 1-1/8¡± 5)smoothness: 3.1*10-3 6)coat thickness(in): 0.01in ~ 0.02in 7)basic hardness: hrc 16-23 8)surface hardness: hrc 55-62 9)bonding strength(mpa): 484 10)hole rate: 180 days 15) package: wooden case, 1000pcs each case. 16) usage: oil exploration equipment, accessories, oil sucker rod coupling We are the manufacturer of sucker rod couplings and can supply the high quality sucker rod couplings in low price with the hope to establish a long-term relationship with you. If any of the sucker rod couplings interests you, please contact me for more information about the sucker rod couplings. Wooden cases
Model:HH24-60 Size:2.4*6.0m Heating area():45.22 Volume(m3):27.13 Chain weight plastics(t):16.3 Tire weight(t):6.78 Segmentation tire weight(t):10.85. No
