Spring nuts are one-piece, self-locking nuts that secure screws and prevent them from loosening due to vibration. Long spring channel nuts are used to secure screws in framing channels, cable management conduits, and ducting systems. They consist of a nut with grooves on the side that fit over the side of the channel edge and a screw hole. Tightening a screw in the nut causes teeth in the grooves to lock into the channel edge, holding the nut in place. spring channel nuts are used to place and secure fittings, electrical panels, junction boxes, or piping clamps within channels or conduits.
Square weld nuts have four small projections in their back ends to facilitate their welding onto the surface of other metals. The most significant advantage of using these nuts is that they can be welded into even imperfect and irregular surfaces without losing their balance. The vast majority of weld nuts are manufactured in low carbon steel or stainless steel. They come with a pilot hole using which fasteners can be inserted. The pilot hole is used for precision feeding of fasteners, allowing them to be inserted quickly and accurately on the metal. These nuts are used in automobile and other industrial applications. Aftermarket products such as zinc plating are sometimes used to coat low carbon weld nuts giving it the rust-resistant properties of stainless steel at a substantial cost saving. In addition to possessing very high shear strength, they can also be used in applications that need to resist extremely high torque. At HELLARY it is available in stainless steel, carbon steel, and alloy steel.
A T-nuts are also known as a blind nut, which can however also refer to a rivet nut or an insert nut, and it is a type of nut used to fasten a wood, particle, or composite materials workpiece, leaving a flush surface. It has a long, thin body and a flange at one end, resembling a T in profile. The flanges of T-nuts often have hooks or serrations on the prongs that dig into a wooden workpiece as the bolt is tightened from the opposite side of the piece, providing better retention.
A taper nut is a type of locknut that has an undersized root diameter. This creates interference between the nut and the fastener, plastically deforming the threads on the fastener. Due to this deformation, they are usually only used on permanent or semi-permanent installations. A variation of this nut is the tapered nut. It utilizes a tapered thread to achieve interference. At HELLARY it is available in different materials like stainless steel, alloy, nickel, and many more.
A wing nut or a butterfly nut consists of two large metal wings, one on each side. These wings are applied for easy tightening and loosening using hands, without using tools. The benefit of wing nut is its more ergonomic design that has two tabs that look like wings. It makes it easier to install and remove. Wingnuts are also available in several types as classified by the American Society for Mechanical Engineers (ASME). Type A wing nuts, for instance, are cold-forged. Type B wing nuts, on the other hand, are hot-forged. There are also Type C wing nuts that are die-casted, as well as Type D wing nuts that are made via metal stamping.
- Spring Nut for Profile assembly accessories - Self locking nuts and bolts are now being offered a great importance at different industries. - As far as the self locking nut standard is concerned, this must remain high so that it can be used for irrigation purpose without any hassle. - The m4 nuts and bolts you find here are of great strength and prevent nut loosening under high vibration.
- Hanger Nut For construction - Self locking nuts and bolts are now being offered a great importance at different industries. - Self locking nut standard is concerned and it can be used for irrigation purpose without any hassle. - The m4 nuts and bolts are great strength and prevent nut loosening under high vibration.
- Square Nut used for For tightening - These nuts are very durable and come with a great strength as well as anti-loosening feature. - Tightening the m6 square nut is easy and takes less time. - - Nuts can reduce the working hours to a huge extent. - Use of such nuts can promote safety on a high node.
- Hexagon nut is used for tightening - IMJINST strive hard to supply only the top quality m6 square nut for the market. - These nuts are very durable and come with a great strength as well as anti-loosening feature. - such nuts can reduce the working hours to a huge extent. - Use of such nuts can promote safety on a high node.
- Used for pipes and hydraulic pressure - Forging nut nuts are very durable and come with a great strength as well as anti-loosening feature - Such nuts can reduce the working hours to a huge extent. - Use of such nuts can promote safety on a high node
- Saper Lock Nut is used for Reusable antiloosening nut - Antiloosening nut that uses a three-dimensional spring - An automatic antiloosening nut that absorbs loosening energy using springs elastic clutch and converts it into locking energy. Saper Lock Technology: *Prevent nut loosening under extreme shock and vibration * Reduce working hours because it is easy to tighten
Special Nut, Self locking nuts and bolts are now being offered a great importance at different industries. As far as the self locking nut standard is concerned, this must remain high so that it can be used for irrigation purpose without any hassle.The m4 nuts and bolts are of great strength and prevent nut loosening under high vibration.
- Normal Nut used for For tightening - These nuts are very durable and come with a great strength as well as anti-loosening feature. - Tightening the m6 square nut is easy and takes less time. - - Nuts can reduce the working hours to a huge extent. - Use of such nuts can promote safety on a high node.
- Cold Forging nut used for For tightening and For pipes and hydraulic pressure - These nuts are very durable and come with a great strength as well as anti-loosening feature. - Nuts can reduce the working hours to a huge extent. - Use of such nuts can promote safety on a high node.
- Antiloosening nut applying high temperature and vibration facility protection - An automatic antiloosening nut that absorbs loosening energy using spring elastic clutch and converts it into locking energy - Prevents loosening from shock and vibration - Improvement of constructability due to ease of fastening work - Maintaining clamping force even in incomplete tightening - Can be used repeatedly without damaging screws
Saper Lock S- Reusable antiloosening nut Principle : Compression stress in the elastic screw section increases friction Function : Prevent loosening screws from causing impact Features - Rigid screw elasticity absorbs repetitive stress - Design variability of elastic screw section applies to various junctions
Self locking nuts and bolts are now being offered a great importance at different industries. As far as the self locking nut standard is concerned, this must remain high so that it can be used for irrigation purpose without any hassle. The m4 nuts and bolts are of great strength and prevent nut loosening under high vibration.
Item Name: NUT, PROPELLER 369-64121-0 / 369641210M OEM NO.: 369-64121-0 / 369641210M FOR TOHATSU/NISSAN 4, 5, 6, 8, 9.8 HP FITS: 2002 AND EARLIER NS15D ASSEMBLY KIT 2003 NS15D2 CARBURETOR FUEL FITER Etc.
Standards: A194 grade 2HM Grades: 2H, 2HM, 7, 7M, 4, 8 and 8M Sizes: 1/4-4'' Finish: plain, black, ZP, ZY and HDG Materials: carbon steel, alloy steel and stainless steel Packing: 25kg/box and 36 boxes per pallet Competitive Advantages 1). Top Quality control 2). Competitive Price 3). Various of Design 4). OEM Accepted 5). Customer's Design and Logo are Welcome
DIN934, DIN985, DIN6923, DIN980V ETC.
