General Features Size Universal Colour White Packaging 20 masks per box Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 94 Disposable Inward leakage lt8 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants They are extremely effective 9499 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP2 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP2 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Folded Design You can easily carry around our folded masks in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask If youre looking for a design that is less likely to have leakage check out our cupped design masks Valved The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masks for safety reasons The wearing of your respiratory protective mask becomes more comfortable as there is less moisture buildup However if you suspect you have been infected wearing an unvalved respirator is advised Otherwise you risk exposing other people to virus particles nbsp Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The botto
Used medical equipment and disposable medical supplies.Broker with the capability of sourcing many products.
En 590 diesel, jet a1 fuel, medical supplies, fisheries.
We're looking for a real buyer who wants nitrile gloves from Malaysia. 6.2 fob all in *Supply contract under two brands.(Malaysia and Vietnam) *contract quantityâ??1b (2 years) *deposit 30% LC 70% 6.7 fob *only prince *contract quantityâ??35M( 7 months) *Deposit 10% LC 90% 6.7 fob *only prince *contract quantityâ??60M (9 months) *deposit 5% LC 95% *contract with factory *0.2 commission included for buyer side *Bank guarantees 100% payment for deposit.
*Terms* Moq 20M for 6-12month Can Making Up SOP 1. NCNDA 2. LOI/ICPO From Buyer to initiate order. 3. FCO/SPA from Seller 4. Factory Verification on Allocation Holder by Buyer 5. Opening of L/C with any of the below options :- - Draft LC or BCL - one to two month rolling L/C. - 100% L/C. - 1- 2 months DLC While issuing FCO the allocation holder will make it clear any one of the payment options from above. 6: Within 5 to 7 working days after verification of LCAllocation letter for complete order from manufacturer, along with required documents, Schedule of the deliver is provided with quantity
Hongrui Nitrile Glove USD 8.2, starting from 300,000 boxes of MOQ
Nitrile Gloves Certificates: CE, EU, ISO, FDA...etc Power free. Blue color Straight Fingers Textured surface, Beaded Cuff 100 Gloves per Box, 10 Boxes per Carton. Shelf life 3 years. Store in cool dry place, avoid excessive heat. storage temperature should be between 5-30c. Opened box should be shielded from exposure to direct sun or florescent light
1.High-impact protection certified to ANSI Z87.1,Military Requirements and CE EN166. 2.Widest field-of-view and optically correct goggle lens provide unprecedented visual clarity. 3. 2.8 mm polycabonate high impact lens ,High performance U.S. imported coating provides superior protection against fogging and scratching. 4.Top and lateral forced air vents provide constant airflow while filtration media prevents small particle entry. 5.Interchangeable lenses for various light conditions - Clear, Smoke and Yellow 6.Polycarbonate lenses offer 100% protection from UV-A, UV-B and UV-C rays. 7.Pliable frame material and strapping system seals to face comfortably. 8.Low profile design ensures compatibility with helmet,, binoculars and night-vision systems. 9.Optional Prescription (Rx) Carrier available11.WG:8.1KG 12.BOX SIZE38*18*8.5CM 13.CTN SIZE45*40*38CMM 14.PACKING:02 PCS of single goggles in one box,then105 boxes in one CTN1300 PCS/CTN.
1.High-impact protection certified to ANSI Z87.1,Military Requirements and CE EN166. 2. The widest field-of-view and optically correct goggle lens provide unprecedented visual clarity. 3. 2.8 mm polycarbonate high impact lens , High-performance U.S. imported coating provides superior protection against fogging and scratching. 4.Top and lateral forced air vents provide constant airflow while filtration media prevents small particle entry. 5.Interchangeable lenses for various light conditions - Clear, Smoke and Yellow 6.Polycarbonate lenses offer 100% protection from UV-A, UV-B and UV-C rays. 7.Pliable frame material and strapping system seals to face comfortably. 8.Low profile design ensures compatibility with helmet,sights, binoculars and night-vision systems. 9.Optional Prescription (Rx) Carrier available 11.WG:8.1KG 12.BOX SIZE38*18*8.5CM 13.CTN SIZE45*40*38CMM 14.PACKING:02 PCS of single goggles in one box,then105 boxes in one CTN1300 PCS/CTN.
General Features of our Face Shields Easy to clean and sterilise Eco-friendly Anti-fog Large 43cm/17 protective surface Why our Face Shields More comfortable to wear than a face mask Lightweight Easy to assemble Easy to Clean and Sterilise Our Face shields were made with non-porous plastic which makes it easy to clean and sterilise. Being exceptionally durable as well, our shield can be used many times if properly handled and regularly disinfected. Anti-fog The elastic band that goes over your head is attached to another one which holds your shield in place. This leaves enough space between your head and the shield, preventing the hot air from becoming trapped between your face and the protective plastic. Unlike other face shields that usually use foam, our face shields were especially designed to be anti-fog by maximising breathability and visibility. Eco-friendly The plastic used to make our face shields is 100% recyclable. Vannin Healthcare was specifically focused on a combination of recyclability and breathability to protect you in more than one ways, both long- and short-term. A lightweight alternative to a face mask, our shields are easy to assemble and comfortable.
General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified In accordance with the European standard EN14683:2005 BFE 98% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Non-splash resistant Comfort Features Breathing resistance & 29.4 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply surgical face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type II medical masks effectively resist bacterial penetration with a rating of at least 98% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 98 �¢?? 99.9% protected from inhaling airborne pollutants. 100% compliant with regulations (CE, EN14683:2005) Our surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The combination of a soft lightweight material and comparatively low breathing resistance allows for greater breathability. This also means the fabric is more absorbent, which serves to lessen the moisture build-up. Disposable In order for your Type II mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.
General Features Size Universal Colour White Packaging 20 masks per box Optional design Cupped or folded Safety Features CEcertified FDAcleared In accordance with the US standard NIOSH42CFR84 Filtration efficacy of PM25 99 Filtration efficacy of PM03 95 Disposable Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic ear loops for a more secure maskadjustment High fit effectiveness Fits more tightly against the face cupped respirators Conveniently portable folded respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA NIOSH42C FR84 Our N95 respirators have been confirmed to meet all of the performance requirements set by the US standard NIOSH42C FR84 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your N95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Cupped Design Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket If youre looking for a more portable alternative check out our folded mask design Remember if your mask gets damaged its best to just throw it away User Seal Check Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The bottom strap should go below your ears over your neck The top strap should go high on your head above the ears Adjust the mask carefully against your face not allowing for any gaps between the mask and your face Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect it
General Features Size Universal Colour White Packaging 20 masks per box Fluid resistant Optional design Cupped or folded Safety Features CEcertified FDAcleared In accordance with the Chinese standard GB26262006 Filtration efficacy of PM25 99 Filtration efficacy of PM03 95 Disposable Inward leakage lt8 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic ear loops for a more secure maskadjustment High fit effectiveness Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA GB26262006 Our KN95 respirators have been confirmed to meet all of the performance requirements set by the Chinese standard GB26262006 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your KN95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Fluid Resistant Our filtering face piece respirators are FDAcleared as being adequately fluid resistant Therefore they are recommended for use during surgical procedures or circumstances where one could come in contact with infectious splatters of bodily fluids User Seal Check Before entering a possibly contaminated area you need to properly put on your filtering face piece To do this you need to Take the mask by its ear loops one in each hand with the nose clip up Position the respirator under your chin Place each ear loop behind its respective ear Adjust the mask carefully against your face not allowing for any gaps between the mask and your face Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect its position and then quickly exhale Depending on where you fill the air passing adjust the nose clip or the entire mask accordingly following the aforementioned steps If there are no gaps for the air to pass through you have correctly put on the mask
General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified in accordance with the European standard EN14683:2005 BFE 95% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Non-splash resistant Comfort Features Breathing resistance < 29.4 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type I medical masks effectively resist bacterial penetration with a rating of at least 95% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 95 â?? 99.9% protected from inhaling airborne pollutants. 100% compliant with regulations (CE, EN14683:2005) Our surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The combination of a soft lightweight material and comparatively low breathing resistance allows for greater breathability. This also means the fabric is more absorbent, which serves to lessen the moisture build-up. Disposable In order for your Type I mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.
CIF 3Ply Mask -FDA L1 50/Box Color Blue, pink, white $1.5 including $0.2 commission $1.60 Inclusive $0.2 Commission for Black Time Fast Boat 10-18Days MOQ: 50M-5B SOP: 1. NCNDA, LOI 2 DRAFT SBLC/LC or TT 3 Seller offer life Video 3. IMFPA, Spa SBLC/LC or TT 4. CIF PORT, Buyer INSPECTION 5. Seller Release SGS &Buyer release FUND 6 Buyer Customs clearance Aug 24 2021y
Malaysia Cardinal / Passed SGS Available 50% TT ï¼?$ 14.40 Buyer $ 0.8 Commission Production quantity 300K-50M Production time 1-12 Monthly Otg first week 300K-3M 2 Moq 300K 3 FOB A SBLC Price $14.90 /boxed Buyer Part 0.7Commission B Advance 50% TT Price $ 14.40 /Box Buyer Part 0.8 Commission 4 CIF Sea ADD 0.70 AIR Discuss *Make up 50% for each buyer and seller SOP: 1, NCNDA, ICPO KYC 2, Seller FCO buyer Prove Fund or Bank Draft SBLC 3 DRAF SPA SPA SIGNED.IMFPA 4 Pay SBLC/ /TT 50% 4 INSPECTION AND PAY 5 CIF OR DD CIF +Boat $0.70 Air Price can discuss 6 Close deal, Going to next rolling Notice 1, We are seller /Title 2 Marking Up Available 3 USA and CANADA Lawyer logistics Team 4 Why Insure get Production We are Reseller/Title Holder We are not AH Suppilier have over 20 success performance Case ï¼?we arrange Previous Performance sgs Why can't ALLOCATION Holder get the goods or production line? We can get it We pay T/T and Success experience this is why we can get all Production &Then sell to buyer ,We are reseller and Title holder We offer 2 % PB Valid period Jan 10-Feb 20 2022
Size:15.5*10.5cm Stock:Yes Shelf Life:2 years Safety standard:GB2626-2006 Instrument classification:Class II Material:PP, PP+Melt-blown Fabric+PP Applicable People:Adult Filter Rating:98% Quality Certification:CE Standard:EN14683 Type IIR Product name:IIR Nose Medical Facemask Type:Folding Particulate Protective Mask Certificate:CE/ISO/EN14683 Feature:BFE 98 % PFE 98% Properties:IIR Medical Respirator Packing:10pcs/bag Application:Safety Protection OEM & ODM:Customization Service Provided
Product Description : N95 face mask with Filters, Ear Loops Price of product ( USD price or FOB price) : Negotiable Product origin : Shenzhen, China Key Specifications/Special Features : High BFE, PFE, adjustable nose piece, Elastic earloop, CE certificated Minimum Order Size and Packaging details : 50000 pcs
GE OMNIPAQUE (iohexol) Injection 300mg and 350mg MOQ: 10,000 VAILS or 1,000 Packs Monthly. Supply ability: 100,000 VALS or 10,000 Packs Monthly Supply Ability: 50,000 VAILS or 5,000 Packs Monthly Payment terms: 100% Pre-payment by wire TT Delivery time: 30 days Please send me your PO details to move forward.